Anker SOLIX C1000 Gen 2 Portable Power Station vs BLUETTI AC180 Portable Power Station
These are side-by-side facts taken from each product guide: published specifications, strengths and caveats as their sources state them. This page is not a test, a ranking or a verdict about which model is better.
Anker SOLIX C1000 Gen 2 Portable Power Station
Fast-recharging 1 kWh outage backup
Choose this model when 1,024Wh and 2,000W of continuous output fit the outage plan and a 10 ms transfer function is useful. The 49-minute recharge claim requires the app-enabled UltraFast mode, and the capacity cannot be expanded.
Published specifications
- 1,024Wh battery capacity
- 2,000W continuous AC output and 3,000W peak output
- Up to 1,600W UltraFast AC input; standard AC input is up to 1,200W
- Up to 600W solar input within the stated voltage and current limits
- 10 ms UPS function
- 24.9 lb net weight
Strengths
- Continuous output covers many household and portable loads up to 2,000W
- UltraFast mode provides a rapid wall-recharge option when needed
- The maker specifies 80% capacity after 4,000 cycles
Caveats
- Battery capacity is not expandable
- UltraFast charging requires the app and is not the maker's recommended everyday charging mode
- The car charging cable is sold separately
Read the full Anker SOLIX C1000 Gen 2 Portable Power Station guide
BLUETTI AC180 Portable Power Station
Higher-capacity 1 kWh backup with a 20 ms UPS mode
Choose the AC180 when 1,152Wh of capacity, 1,800W continuous output and a 20 ms transfer function fit the backup plan. Its 2,700W Power Lifting claim applies to compatible resistive heating loads, not to every appliance.
Published specifications
- 1,152Wh LiFePO4 battery
- 1,800W continuous AC output; Power Lifting supports compatible heating loads rated up to 2,700W
- Four 120V AC outlets plus USB, 12V and wireless outputs
- Up to 1,440W AC input and 500W solar input
- 20 ms UPS transfer
- About 35.27 lb
Strengths
- More stored energy than the Anker C1000 Gen 2 or Jackery Explorer 1000 v2
- Up to 500W solar input
- The maker specifies more than 3,500 cycles to 80% original capacity
Caveats
- Heavier than the Anker C1000 Gen 2 and Jackery Explorer 1000 v2
- Power Lifting mode is limited to compatible resistive heating devices
- A 20 ms transfer is not the same as zero-interruption power
How to choose between them
Choose the Anker SOLIX C1000 Gen 2 Portable Power Station if your situation matches: Fast-recharging 1 kWh outage backup. Its main caveat: Battery capacity is not expandable.
Choose the BLUETTI AC180 Portable Power Station if your situation matches: Higher-capacity 1 kWh backup with a 20 ms UPS mode. Its main caveat: Heavier than the Anker C1000 Gen 2 and Jackery Explorer 1000 v2.
Both entries repeat what each guide records. Confirm the model, included parts and availability on the current listing before ordering.
Primary sources
- Anker SOLIX C1000 Gen 2 Portable Power Station product page Source for Anker SOLIX C1000 Gen 2 Portable Power Station
- Anker SOLIX C1000 Gen 2 User Guide (A1763) Source for Anker SOLIX C1000 Gen 2 Portable Power Station
- BLUETTI AC180 product and specification page Source for BLUETTI AC180 Portable Power Station
- BLUETTI AC180 support FAQs Source for BLUETTI AC180 Portable Power Station
Primary sources checked .