Anker SOLIX C300 Portable Power Station vs BLUETTI AC180 Portable Power Station
These are side-by-side facts taken from each product guide: published specifications, strengths and caveats as their sources state them. This page is not a test, a ranking or a verdict about which model is better.
Anker SOLIX C300 Portable Power Station
Portable electronics and light backup loads
Choose the C300 for electronics and light loads when 288Wh, 300W continuous AC output and a 9.1-pound body are enough. The advertised 600W SurgePad mode has device restrictions, and solar input is limited to 100W with specific panel-compatibility requirements.
Published specifications
- 288Wh LiFePO4 battery
- 300W continuous AC output; special SurgePad mode for compatible devices rated up to 600W
- Eight total output ports
- Up to 100W solar input
- Under-10 ms UPS function
- 9.1 lb net weight
Strengths
- Compact size and 9.1-pound weight
- Two-way USB-C charging up to 140W is listed
- Five-year warranty is stated on the product page
Caveats
- 300W output excludes common high-draw appliances
- Solar input is limited to 100W and not every Anker panel is compatible
- Car and solar charging accessories may require separate purchases
BLUETTI AC180 Portable Power Station
Higher-capacity 1 kWh backup with a 20 ms UPS mode
Choose the AC180 when 1,152Wh of capacity, 1,800W continuous output and a 20 ms transfer function fit the backup plan. Its 2,700W Power Lifting claim applies to compatible resistive heating loads, not to every appliance.
Published specifications
- 1,152Wh LiFePO4 battery
- 1,800W continuous AC output; Power Lifting supports compatible heating loads rated up to 2,700W
- Four 120V AC outlets plus USB, 12V and wireless outputs
- Up to 1,440W AC input and 500W solar input
- 20 ms UPS transfer
- About 35.27 lb
Strengths
- More stored energy than the Anker C1000 Gen 2 or Jackery Explorer 1000 v2
- Up to 500W solar input
- The maker specifies more than 3,500 cycles to 80% original capacity
Caveats
- Heavier than the Anker C1000 Gen 2 and Jackery Explorer 1000 v2
- Power Lifting mode is limited to compatible resistive heating devices
- A 20 ms transfer is not the same as zero-interruption power
How to choose between them
Choose the Anker SOLIX C300 Portable Power Station if your situation matches: Portable electronics and light backup loads. Its main caveat: 300W output excludes common high-draw appliances.
Choose the BLUETTI AC180 Portable Power Station if your situation matches: Higher-capacity 1 kWh backup with a 20 ms UPS mode. Its main caveat: Heavier than the Anker C1000 Gen 2 and Jackery Explorer 1000 v2.
Both entries repeat what each guide records. Confirm the model, included parts and availability on the current listing before ordering.
Primary sources
- Anker SOLIX C300 Portable Power Station product page Source for Anker SOLIX C300 Portable Power Station
- Anker SOLIX C300 US User Guide (A1722) Source for Anker SOLIX C300 Portable Power Station
- BLUETTI AC180 product and specification page Source for BLUETTI AC180 Portable Power Station
- BLUETTI AC180 support FAQs Source for BLUETTI AC180 Portable Power Station
Primary sources checked .