BOSCH PS31-2A 12V Max Drill/Driver Kit vs CRAFTSMAN V20 CMCD711C2 Hammer Drill Kit
These are side-by-side facts taken from each product guide: published specifications, strengths and caveats as their sources state them. This page is not a test, a ranking or a verdict about which model is better.
BOSCH PS31-2A 12V Max Drill/Driver Kit
Compact drilling in cabinets and tight spaces
Choose this kit for furniture, cabinet hardware and small repairs when compact size and two batteries matter. Its 3/8 in chuck limits larger bit shanks, and a heavier-duty drill is a better fit for long structural screws or masonry holes.
Published specifications
- 12V Max drill/driver with a 7 in head length
- Two 2.0 Ah batteries, BC330 charger, two screwdriver bits and carrying bag included
- 3/8 in single-sleeve three-jaw chuck
- Two speed ranges: 0 to 350 and 0 to 1,300 rpm
- 265 in-lbs maximum torque and 20+1 clutch settings
Strengths
- Compact head length helps in confined spaces
- Two batteries support alternating between use and charging
- Twenty clutch settings plus a drilling setting provide fastening control
Caveats
- The 3/8 in chuck does not accept larger bit shanks
- No hammer mode for masonry drilling
- Compact design is intended for lighter work rather than long structural screws
CRAFTSMAN V20 CMCD711C2 Hammer Drill Kit
Drilling anchors in brick, block and concrete
Choose this hammer drill kit when masonry anchors are part of the job and two batteries are useful. CRAFTSMAN's page conflicts on whether those batteries are 1.5 Ah or 1.3 Ah, so confirm capacity if runtime planning depends on the exact figure.
Published specifications
- V20 system with 18 V nominal voltage
- Brushed hammer drill with two batteries and charger
- 1/2 in keyless chuck and 23 clutch settings
- Two speed ranges: 0 to 350 and 0 to 1,500 rpm
- 25,500 blows per minute and 280 unit watts out
- Battery capacity listed as 1.5 Ah in the page title and 1.3 Ah in the package list
Strengths
- Hammer action supports drilling in concrete and brick
- Two batteries are included
- The 1/2 in keyless chuck accepts common masonry and general-purpose bits
Caveats
- CRAFTSMAN's page gives conflicting battery capacities
- No case is listed
- Masonry drilling requires a plan for controlling silica dust
Read the full CRAFTSMAN V20 CMCD711C2 Hammer Drill Kit guide
How to choose between them
Choose the BOSCH PS31-2A 12V Max Drill/Driver Kit if your situation matches: Compact drilling in cabinets and tight spaces. Its main caveat: The 3/8 in chuck does not accept larger bit shanks.
Choose the CRAFTSMAN V20 CMCD711C2 Hammer Drill Kit if your situation matches: Drilling anchors in brick, block and concrete. Its main caveat: CRAFTSMAN's page gives conflicting battery capacities.
Both entries repeat what each guide records. Confirm the model, included parts and availability on the current listing before ordering.
Primary sources
- PS31-2A Cordless Drill/Drivers | Bosch Power Tools Source for BOSCH PS31-2A 12V Max Drill/Driver Kit
- Battery Safety | Power Tool Institute Source for BOSCH PS31-2A 12V Max Drill/Driver Kit
- V20* Cordless 1/2-in Hammer Drill With (2) 1.5 ah Batteries And Charger (CMCD711C2) | CRAFTSMAN Source for CRAFTSMAN V20 CMCD711C2 Hammer Drill Kit
- Silica, Crystalline - Overview | Occupational Safety and Health Administration Source for CRAFTSMAN V20 CMCD711C2 Hammer Drill Kit
Primary sources checked .