CRAFTSMAN V20 CMCD711C2 Hammer Drill Kit vs Makita XFD131 18V LXT Brushless Driver-Drill Kit
These are side-by-side facts taken from each product guide: published specifications, strengths and caveats as their sources state them. This page is not a test, a ranking or a verdict about which model is better.
CRAFTSMAN V20 CMCD711C2 Hammer Drill Kit
Drilling anchors in brick, block and concrete
Choose this hammer drill kit when masonry anchors are part of the job and two batteries are useful. CRAFTSMAN's page conflicts on whether those batteries are 1.5 Ah or 1.3 Ah, so confirm capacity if runtime planning depends on the exact figure.
Published specifications
- V20 system with 18 V nominal voltage
- Brushed hammer drill with two batteries and charger
- 1/2 in keyless chuck and 23 clutch settings
- Two speed ranges: 0 to 350 and 0 to 1,500 rpm
- 25,500 blows per minute and 280 unit watts out
- Battery capacity listed as 1.5 Ah in the page title and 1.3 Ah in the package list
Strengths
- Hammer action supports drilling in concrete and brick
- Two batteries are included
- The 1/2 in keyless chuck accepts common masonry and general-purpose bits
Caveats
- CRAFTSMAN's page gives conflicting battery capacities
- No case is listed
- Masonry drilling requires a plan for controlling silica dust
Read the full CRAFTSMAN V20 CMCD711C2 Hammer Drill Kit guide
Makita XFD131 18V LXT Brushless Driver-Drill Kit
General drilling with a brushless Makita tool
Choose this kit for general drilling and fastening when a brushless motor, a 1/2 in chuck and one 3.0Ah battery fit your needs. Add another compatible LXT battery if you expect to work continuously, and choose a hammer drill for regular masonry work.
Published specifications
- 18V LXT brushless driver-drill
- One BL1830B 3.0Ah battery, DC18SD charger and tool bag included
- 1/2 in keyless chuck
- Two speed ranges: 0 to 500 and 0 to 1,900 rpm
- 440 in-lbs maximum torque
- Drilling capacity of 1-1/2 in in wood and 1/2 in in steel
Strengths
- Brushless motor
- Higher speed range reaches 1,900 rpm
- Works with Makita 18V lithium-ion batteries marked with a Star symbol
Caveats
- Only one battery is included
- No hammer mode for masonry drilling
- A second battery is an added purchase for uninterrupted work
Read the full Makita XFD131 18V LXT Brushless Driver-Drill Kit guide
How to choose between them
Choose the CRAFTSMAN V20 CMCD711C2 Hammer Drill Kit if your situation matches: Drilling anchors in brick, block and concrete. Its main caveat: CRAFTSMAN's page gives conflicting battery capacities.
Choose the Makita XFD131 18V LXT Brushless Driver-Drill Kit if your situation matches: General drilling with a brushless Makita tool. Its main caveat: Only one battery is included.
Both entries repeat what each guide records. Confirm the model, included parts and availability on the current listing before ordering.
Primary sources
- V20* Cordless 1/2-in Hammer Drill With (2) 1.5 ah Batteries And Charger (CMCD711C2) | CRAFTSMAN Source for CRAFTSMAN V20 CMCD711C2 Hammer Drill Kit
- Silica, Crystalline - Overview | Occupational Safety and Health Administration Source for CRAFTSMAN V20 CMCD711C2 Hammer Drill Kit
- Makita USA - Product Details - XFD131 Source for Makita XFD131 18V LXT Brushless Driver-Drill Kit
- Makita 18V | 36V LXT: One System. Over 350+ Cordless Products | Makita Source for Makita XFD131 18V LXT Brushless Driver-Drill Kit
Primary sources checked .