Creality K1C Enclosed 3D Printer vs Creality K2 Plus Combo with CFS
These are side-by-side facts taken from each product guide: published specifications, strengths and caveats as their sources state them. This page is not a test, a ranking or a verdict about which model is better.
Check Creality K1C Enclosed 3D Printer on AmazonCheck Creality K2 Plus Combo with CFS on Amazon
Creality K1C Enclosed 3D Printer
Enclosed printing of PLA, ABS and carbon fibre filaments
An enclosed printer with a 220 x 220 x 250 mm build volume, a 300C tri-metal nozzle with a hardened steel tip, a 100C PEI bed, an active carbon filter and an AI camera. Creality gives 300 mm/s as the typical speed and 600 mm/s as the ceiling.
Published specifications
- Maker: 220 x 220 x 250 mm build volume; 0.4 mm tri-metal nozzle
- Maker: 300C max nozzle, 100C max heatbed, PEI flexible plate
- Maker: up to 600 mm/s, 20,000 mm/s2; typical speed 300 mm/s
- Maker: 355 x 355 x 482 mm, 12.4 kg net; listing says 10 in cube
- Maker: 45 dB or less in silent mode, measured at one metre
- Maker: USB drive and Wi-Fi; Creality Print or Cura 5.0 and later
Strengths
- Hardened steel nozzle tip rated for PLA-CF, PA-CF and PET-CF
- Enclosure, carbon filter and AI camera are all included
- Ships assembled with one-tap levelling and auto Z offset
Caveats
- Listing size of 10 x 10 x 10 in conflicts with Creality's figures
- 220 x 220 x 250 mm build volume and 100C bed cap
- Camera alerts need Creality Print or the Creality Cloud app
Creality K2 Plus Combo with CFS
Large multicolour and engineering-filament prints
A 350 mm cube printer with an actively heated chamber to 60C, a 350C hardened-tip nozzle, a 120C bed, dual AI cameras and step-servo motors on all axes, bundled with one four-slot CFS. The Combo stands 916 mm tall and the printer alone weighs 35 kg.
Published specifications
- Maker: 350 x 350 x 350 mm build volume; 0.4 mm hardened-tip nozzle
- Maker: 350C nozzle, 120C bed, active chamber heating to 60C
- Maker: 600 mm/s max, 30,000 mm/s2; typical speed 300 mm/s
- Maker: Combo 495 x 515 x 916 mm; printer 35 kg net, CFS 4.56 kg
- Maker: 1,200 W rated; 45 dB or less at 300 mm/s in Creality's lab
- Maker: USB, Ethernet, 2.4 and 5 GHz Wi-Fi; 32 GB storage
Strengths
- Active 60C chamber, the level Creality gives for ABS, ASA and PPS
- Toolhead AI camera for flow and pressure advance calibration
- Ethernet and dual-band Wi-Fi with active belt tensioning
Caveats
- Listing weight of 27.5 lb conflicts with Creality's 35 kg printer
- Combo stands 916 mm tall by Creality's figure; check shelf height
- CFS excludes TPU and warns hard filaments can break in the tube
How to choose between them
Choose the Creality K1C Enclosed 3D Printer if your situation matches: Enclosed printing of PLA, ABS and carbon fibre filaments. Its main caveat: Listing size of 10 x 10 x 10 in conflicts with Creality's figures.
Choose the Creality K2 Plus Combo with CFS if your situation matches: Large multicolour and engineering-filament prints. Its main caveat: Listing weight of 27.5 lb conflicts with Creality's 35 kg printer.
Both entries repeat what each guide records. Confirm the model, included parts and availability on the current listing before ordering.
Primary sources
- Creality K1C product page and specification table Source for Creality K1C Enclosed 3D Printer
- Creality Wiki: K1C/K1C2025 User Manual Source for Creality K1C Enclosed 3D Printer
- Creality K2 Plus Combo product page and specification tables Source for Creality K2 Plus Combo with CFS
- Creality K2 Series page with K2 Plus comparison column Source for Creality K2 Plus Combo with CFS
- Creality Wiki: CFS Filament Compatibility Description Source for Creality K2 Plus Combo with CFS
Primary sources checked .