Plain Buy Guides

As an Amazon Associate I earn from qualifying purchases. Our product guides include affiliate links to Amazon.

Chainsaw sharpener buying guide

Chainsaw sharpeners: handheld or bench grinder

Decide where you sharpen. The Oregon 12V Sure Sharp is a handheld 12V grinder with a car adapter and battery clips for use anywhere. The Oregon 520-120 is a 120V bench grinder for chain off the saw, up to .404 inch pitch. The Oregon 620-120 adds a hydraulic clamping vise and handles chain up to 3/4 inch pitch.

Prepared October 18, 2026 from Oregon's product pages, the 520-120 operator's manual and the exact Amazon listings. These picks are built from the makers' published specs and manuals. All three are Oregon because Oregon's handheld and bench grinders were the electric sharpeners we found sold by Amazon.com with maker pages.

Choose by where and how often you sharpen

A handheld grinder goes wherever the saw is; a bench grinder clamps the chain in a vise with set angles.

Three Oregon chainsaw sharpeners compared
Your jobModelUseful differenceCheck or skip
Handheld, use anywhereOregon 12V Sure Sharp (575214)12V handheld; 25,000 RPM; 5/32, 3/16 and 7/32 in. stones; car adapter and battery clips; 5 m cord.Round-ground chain up to .404 in. pitch.
Bench grinder, manual viseOregon 520-120120V, 4.3 A, 300 W, 3400 RPM; 5-3/4 in. wheels; self-centering vise; built-in light; up to .404 in. pitch.3/4 in. pitch needs a separately sold vise.
Bench grinder with hydraulic viseOregon 620-120Same 120V, 4.3 A, 300 W, 3400 RPM motor; hydraulic assist clamping vise; grinds chain up to 3/4 in. pitch out of the box.21 lb on Oregon's page; heaviest here.

Check pitch, wheels and safety

Exact models and buying options

Oregon 12V Sure Sharp (575214)

Choose the Sure Sharp to sharpen in the field. Oregon describes a handheld 12V grinder with a motor that runs at 25,000 RPM, a sharpening angle adjustment guide, a shank lock for stone changes, a car adapter, alligator battery clips and a 5 meter cord.

Oregon lists one each 5/32 inch (4.0 mm), 3/16 inch (4.8 mm) and 7/32 inch (5.5 mm) sharpening stones and a collet wrench, for round-ground 1/4, 3/8 low profile, .325, 3/8 and .404 inch chain. The Amazon listing names model 575214, Oregon's part number.

Skip it when: You sharpen many chains and want set angles every time (see the bench grinders).

Warranty: Oregon's Sure Sharp page does not state warranty terms; ask Oregon before buying if coverage matters.

Check Oregon 12V Sure Sharp on Amazon

Editor: Isaac Daniels

Oregon 520-120

Choose the 520-120 for a bench grinder with a manual vise. Oregon lists top plate and down angle adjustments, a longer self-centering forward and aft sliding vise, an indexing chain stop, grinding wheel wear adjustment, a motor-head release button, a built-in light and one-way motor rotation.

Oregon's 520-120 manual lists 120V, 60Hz, 300W, 5-3/4 inch grinding wheels, a maximum wheel speed of 3400 per minute, a 15W lamp, 77 dB(A) and chain types 1/4, .325, 3/8 and .404 inch. Oregon's page lists part 520-120, which matches the Amazon listing model.

Skip it when: You run 3/4 inch pitch chain and do not want to buy a separate vise (see the 620-120).

Warranty: Oregon's 520-120 manual says Oregon warrants its products against defects in materials and workmanship for as long as the original retail purchaser owns them, limited to replacement parts, and excludes normal wear, abuse, improper maintenance and improper repair.

Check Oregon 520-120 on Amazon

Oregon 620-120

Choose the 620-120 for frequent bench sharpening. Oregon describes a hydraulic assist clamping vise that clamps hands-free, so you do not tighten and loosen the vise by hand, a wide clamping area with clear markings, and vise capacity for all chain types.

Oregon lists the same single phase, direct-drive 120V, 60Hz, 4.3A, 300W, 3400 RPM, 0.4 HP motor as the 520-120, 5-3/4 inch wheels, grinding up to 3/4 inch pitch out of the box, 21 lb and 19-1/2 inch height. Oregon's page lists part 620-120, which matches the Amazon listing model.

Skip it when: You sharpen only a few chains a year (see the Sure Sharp or 520-120).

Warranty: Oregon's 620-120 page links its manual, but we could not read its warranty text; confirm the terms with Oregon.

Check Oregon 620-120 on Amazon

Manufacturer warranties

Oregon 520-120: warranted against defects for as long as the original retail purchaser owns it, limited to replacement parts, per its manual. Sure Sharp and 620-120: confirm terms with Oregon. Full conditions are in each model section.

Common buying questions

Can I sharpen a chainsaw chain away from the shop?

Oregon pitches its handheld 12V Sure Sharp for use anywhere, with a car adapter and battery clips. Its bench grinders clamp the chain in a vise, so the chain comes off the saw.

What chain pitch do these sharpen?

Oregon lists up to .404 inch for the Sure Sharp and 520-120 (3/4 inch with a separately sold vise on the 520-120), and up to 3/4 inch for the 620-120.

Do I need safety glasses to sharpen a chain?

Yes. Oregon's 520-120 manual says to wear safety glasses and notes that everyday eyeglasses are not safety glasses.

What is the difference between the 520-120 and 620-120?

Oregon lists the same motor for both. The 620-120 adds a hydraulic assist clamping vise and grinds chain up to 3/4 inch pitch out of the box.

Sources and buying checks

Oregon's product pages and the 520-120 operator's manual supply the specifications and warranty details. These picks are built from the makers' published specs and manuals.

Check the exact model, what is in the box, seller and return notice before ordering, and read the manual's safety section before use. Product details can change.