As an Amazon Associate I earn from qualifying purchases. Our product guides include affiliate links to Amazon.
Floor-standing speaker buying guide
Floor-standing tower speakers by room size and amplifier
Floor-standing (tower) speakers are tall speakers that stand on the floor instead of a shelf. All four here are passive and sold as single speakers, so a stereo pair means buying two. The Polk Monitor XT60 is the slimmest, the Polk Monitor XT70 adds a second woofer, and the Klipsch R-600F and Klipsch R-800F use horn-loaded tweeters with dual 6.5-inch or 8-inch woofers.
Prepared October 15, 2026 from Polk’s and Klipsch’s product pages, info and spec sheets, owner’s manuals and warranties, and the exact Amazon listings. These picks are built from the makers' published specs and manuals.
Choose by room size and space
Within each brand, the larger model lists deeper bass and higher sensitivity.
Dual 8 in woofers, 98 dB in-room sensitivity, 34 Hz–21 kHz, 43 in tall, 54 lb.
Deepest cabinet at 17.5 in.
Check amplifier, sensitivity and size
Sensitivity: Polk lists 86 dB (XT60) and 89 dB (XT70). Klipsch lists 96 dB (R-600F) and 98 dB (R-800F) in-room, measured at 1 m with 2.83 V input. The two makers may measure differently, so compare within a brand first.
Frequency response: Polk lists 38 Hz–40 kHz (XT60) and 35 Hz–40 kHz (XT70). Klipsch lists 38 Hz–21 kHz ±3 dB (R-600F) and 34 Hz–21 kHz ±3 dB (R-800F).
Amplifier match: Polk recommends 25–200 W per channel for both XT towers and lists 4- and 8-ohm compatibility. Klipsch lists 8-ohm nominal impedance with power handling of 100 W / 400 W (R-600F) and 150 W / 600 W (R-800F).
Size and weight: XT60: 7.5 × 36.4 × 9.09 in, 20 lb. XT70: 9.25 × 40.4 × 12.5 in, 35 lb. R-600F: 40 in tall, 9.4 in wide, 15.2 in deep, 41 lb. R-800F: 43 in tall, 10.9 in wide, 17.5 in deep, 54 lb.
Placement: Klipsch’s manual suggests left and right speakers 6 to 15 feet apart, toed in slightly, with the listening seat about 1 to 1.5 times that distance away.
Exact models and buying options
Polk Monitor XT60
Choose the XT60 for a slim tower in a smaller room. Polk lists a 1 in Terylene dome tweeter, a 6.5 in bi-laminate paper woofer and two 6.5 in passive bass radiators, a 2,200 Hz crossover and 38 Hz–40 kHz overall response.
Sensitivity is listed at 86 dB with 25–200 W per channel recommended, 4- and 8-ohm compatibility and 5-way nickel-plated binding posts. It measures 7.5 × 36.4 × 9.09 in and weighs 20 lb, with a removable grille.
The Amazon listing is for a single speaker and gives model MXT60 and UPC 747192133368. Polk’s Monitor XT60 page, the XT60/XT70 info sheet and the Monitor XT series manual name the model; Polk does not print UPCs, so the link is bound by model code.
Warranty: The Monitor XT owner’s manual gives a five-year limited warranty in the U.S. and Canada.
Skip it when: You want the most output from a low-powered receiver; it has the lowest listed sensitivity here.
Consider the XT70 for more bass hardware in the Polk line. Polk lists a 1 in Terylene dome tweeter, two 6.5 in bi-laminate paper woofers and two 8 in passive bass radiators, a 2,700 Hz crossover and 35 Hz–40 kHz overall response.
Sensitivity is listed at 89 dB with 25–200 W per channel recommended and 4- and 8-ohm compatibility. It measures 9.25 × 40.4 × 12.5 in and weighs 35 lb.
The Amazon listing is for a single speaker titled Monitor XT70, with UPC 747192133351; its model field reads “Tower Speaker.” Polk’s Monitor XT70 page, info sheet and series manual name the model; Polk does not print UPCs, so the link is bound by the model name in the title.
Warranty: The Monitor XT owner’s manual gives a five-year limited warranty in the U.S. and Canada.
Skip it when: Floor depth is tight; it is 12.5 in deep.
Consider the R-600F for a horn-loaded tower in a mid-size room. Klipsch lists a 1 in aluminum LTS tweeter on a 90° × 90° Tractrix horn, dual 6.5 in spun-copper TCP woofers and rear-firing Tractrix ports.
Specs listed: 38 Hz–21 kHz ±3 dB, 96 dB in-room sensitivity, 100 W / 400 W power handling, 8 ohms, 1,440 Hz crossover, single gold-plated binding posts, 40 × 9.4 × 15.2 in and 41 lb, with injection-molded feet and screws.
The Amazon listing is for one speaker and gives model R-600F and UPC 743878046304. Klipsch’s R-600F page and spec sheet name the model, and the Reference speakers manual lists it; Klipsch does not print UPCs, so the link is bound by model code.
Warranty: Klipsch’s passive speaker limited warranty is five years for the original retail purchaser.
Skip it when: You need a narrow footprint; it is 15.2 in deep.
Consider the R-800F for a larger room. It uses the same tweeter and horn as the R-600F with dual 8 in spun-copper TCP woofers.
Specs listed: 34 Hz–21 kHz ±3 dB, 98 dB in-room sensitivity, 150 W / 600 W power handling, 8 ohms, 1,400 Hz crossover, single gold-plated binding posts, 43 × 10.9 × 17.5 in and 54 lb.
The Amazon listing is for one speaker and gives model R-800F and UPC 743878046298. Klipsch’s R-800F page and spec sheet name the model, and the Reference speakers manual lists it; Klipsch does not print UPCs, so the link is bound by model code.
Warranty: Klipsch’s passive speaker limited warranty is five years for the original retail purchaser.
Skip it when: The room is small or the speakers must be moved often; each weighs 54 lb.
Polk’s Monitor XT owner’s manual gives the original retail purchaser a five-year limited warranty on the loudspeakers, passive crossover components and enclosure, when bought from an authorized Polk dealer in the U.S. or Canada. Polk or the dealer will repair or replace a defective product; you ship it prepaid and insured with proof of purchase. It excludes accident, misuse, commercial use, over-voltage and unauthorized service, and ends on transfer, removal of the serial number or purchase from an unauthorized dealer.
Klipsch’s U.S. passive speaker limited warranty covers the R-600F and R-800F for five years from purchase, for the original retail purchaser, with repair or replacement at no charge for parts or labor. Claims go through the dealer with the original receipt, or Klipsch at 1-800-554-7724; shipping is the purchaser’s cost. It excludes improper installation, misuse, accident, ordinary wear and cosmetic damage, and is void for altered serial numbers, unauthorized dealers, transfer, or installation or repair by anyone other than a Klipsch authorized installer or dealer.
All four listings are sold and shipped by Amazon.com. The Polk listings show a free 30-day refund or replacement; the Klipsch listings show a 30-day refund or replacement without the free label. Check the return notice before ordering.
Common buying questions
Floor-standing or bookshelf speakers?
These towers list bass down to 34–38 Hz, while Klipsch’s R-40M bookshelf speaker lists 71 Hz, for example. Towers take more floor space and weigh 20 to 54 lb each.
Are these sold as a pair?
No. Each Amazon listing here is for one speaker, so a stereo pair takes two.
Can floor-standing speakers be used for surround sound?
Yes, as front left and right speakers with an AV receiver. Polk says the XT series supports Dolby Atmos and DTS:X receivers and offers an add-on height module.
What amplifier do I need?
Polk recommends 25–200 W per channel for the XT60 and XT70. Klipsch lists power handling of 100 W continuous for the R-600F and 150 W for the R-800F.
Sources and buying checks
Polk’s and Klipsch’s product pages, info and spec sheets, owner’s manuals and warranties supply the specs and terms. Neither maker prints UPCs, so listings are bound by model code. These picks are built from the makers' published specs and manuals.
Polk Monitor XT60: Product page (polkaudio.com), XT60/XT70 info sheet (polkaudio.com).
Polk Monitor XT70: Product page (polkaudio.com), Monitor XT series owner’s manual (polkaudio.com).