As an Amazon Associate I earn from qualifying purchases. Our product guides include affiliate links to Amazon.
Hitch ball mounts: match the whole towing setup
Choose CURT 45036 for a confirmed 2-inch ball and 2-inch drop, 45056 for that ball with a 4-inch drop, or 45331 for a 2-5/16-inch coupler and its specified load range. All use a 2-inch receiver shank. The vehicle, hitch, trailer and other components still set the lowest permitted limit.
Checked October 14, 2026 against the named brand Amazon listings and primary sources below. We compared published specs and fit limits; picks are built from the makers' published specs and manuals.
Measured loaded setup and required drop or approved rise.
Limits
Vehicle, receiver, mount, ball and trailer ratings.
Match both gross trailer and tongue limits; the largest number on one component is not the capacity of the complete setup.
The picks, and why
2-inch ball, 2-inch drop: CURT 45036 Loaded Ball Mount
CURT specifies a 2-inch ball, 2-inch drop and 2 × 2-inch receiver shank. Published limits are 7,500 lb gross trailer weight and 750 lb tongue weight; these do not increase the vehicle or receiver rating.
The maker includes a factory-torqued ball, 5/8-inch hitch pin and clip. Confirm the actual receiver, coupler marking and required loaded-trailer height. Do not assume the same ball fits a coupler with a different diameter marking.
Ball / drop
2 in / 2 in
GTW / tongue
7,500 / 750 lb
Watch for: Verify every towing component and the exact coupler size. Follow the maker’s setup and inspection procedure.
2-inch ball, deeper drop: CURT 45056 Loaded Ball Mount
CURT gives a 4-inch drop with the same 2-inch ball and receiver-shank format. The 7,500/750 lb ratings match 45036; extra drop is a height choice, not a capacity upgrade.
The maker lists a factory-torqued ball plus pin and clip. Its 8-1/4-inch published length differs from the 45036 package. Check clearance and the correct drop using the vehicle and level trailer measurements; do not infer permission to invert a loaded assembly.
Ball / drop
2 in / 4 in
GTW / tongue
7,500 / 750 lb
Watch for: Confirm needed drop and loaded clearance. A similar-looking shank does not establish coupler compatibility.
2-5/16-inch ball, forged shank: CURT 45331 Loaded Forged Ball Mount
CURT specifies a solid forged 2-inch shank, 2-inch drop and factory-torqued 2-5/16-inch ball. Published component limits are 15,000 lb gross trailer weight and 1,500 lb tongue weight.
The maker says the hitch pin is sold separately for 45331. Do not transfer the included-pin package from 45036 or 45056. Confirm the permitted pin, receiver rating and entire towing combination rather than choosing this solely for its larger printed capacity.
Ball / drop
2-5/16 in / 2 in
GTW / tongue
15,000 / 1,500 lb
Watch for: Hitch pin sold separately per CURT. Lowest component and vehicle limits control; this is not a towing-capacity increase.
Published details from the named brands; confirm the exact variant before ordering.
Pick
Choose it for
Check first
CURT 45036 Loaded Ball Mount
2-inch ball, 2-inch drop
Verify every towing component and the exact coupler size. Follow the maker’s setup and inspection procedure.
CURT 45056 Loaded Ball Mount
2-inch ball, deeper drop
Confirm needed drop and loaded clearance. A similar-looking shank does not establish coupler compatibility.
CURT 45331 Loaded Forged Ball Mount
2-5/16-inch ball, forged shank
Hitch pin sold separately per CURT. Lowest component and vehicle limits control; this is not a towing-capacity increase.
Choose drop from measurements
Measure as the vehicle and trailer makers instruct, with the trailer at the required level attitude. The 2-inch and 4-inch drops serve different height combinations.
Check bumper, tailgate and trailer clearance through the permitted movement. A hitch-class label or generic vehicle-fit headline does not replace those measurements.
Check the exact loaded package
Loaded describes a preattached ball here. CURT includes pin and clip with the two hollow-shank picks but lists the pin separately for 45331.
Use current instructions for inspection, attachment and any ball removal. CURT warns that capacity may change if the ball is removed; do not substitute a different ball and retain the original assembly rating by assumption.
Questions
Does the 15,000 lb mount let my car tow that much?
No. CURT says to stay within the lowest capacity of the vehicle and every towing component.
Is a hitch pin included with all three?
CURT lists pin and clip with 45036 and 45056; the 45331 pin is sold separately.
CURT 45036 (maker page: www.curtmfg.com/part/45036) — Exact ball, drop, ratings and included pin.
CURT 45056 (maker page: www.curtmfg.com/part/45056) — Deeper drop and exact package.
CURT 45331 (maker page: www.curtmfg.com/part/45331) — Forged assembly, ratings and separate hitch pin.
Listing details and availability can change. Our recommendations are built from the makers' published specs and manuals. All three checked New offers were sold by Amazon.com. Recheck the selected variant, seller and stock status before ordering.