Plain Buy Guides

As an Amazon Associate I earn from qualifying purchases. Our product guides include affiliate links to Amazon.

Pole saw buying guide

Pick a Pole Saw by Reach, Head and Power Source

For a cordless saw that also detaches for handheld use, compare Worx WG323. For an angled head on a dedicated pole, choose Worx WG349; for corded power, consider WEN 4019. Check machine length separately from the maker’s advertised reach before choosing a pole saw.

Prepared 2026-10-18 from manufacturer pages, manuals, policies and exact Amazon listings. These picks are built from the makers' published specs and manuals.

Choose a pole saw by the job

Three exact models, with the reason to choose or skip each.
Your jobModelUseful differenceCheck or skip
Cordless and detachableWorx WG32310-inch bar; handheld or pole configuration; battery and charger included.10.0 lb with chain and bar; published 12-foot reach is not pole length.
Cordless with head anglesWorx WG3498-inch bar; three head positions; battery and charger included.Cannot be a handheld saw; maker’s reach and length descriptions differ.
Corded pruningWEN 4019120V, 6A; 8-inch chain; shoulder strap and cover listed.Needs an appropriate outdoor cord setup; no battery-powered operation.

Check the pole saw kit and replacement chain

Exact models and buying options

Worx - WG323

Choose WG323 if you want one saw that works on its extension pole and as a handheld chainsaw. Worx specifies a 10-inch bar, automatic oiling, tool-free chain tensioning and 12.5 ft/s chain speed. Those figures describe the tool; they do not rank its cutting speed against these other saws.

The WG323 column of the manual gives 10.0 lb with chain and bar, a 4.5-ounce oil tank, a WA3575 battery and WA3742 charger. The product page identifies that battery as 20V 2.0 Ah and lists a five-hour charge. Its pole extends from 77 to 105 inches in the manual; the advertised 12-foot reach is a different figure.

Skip this kit if you only need the dedicated angled-head arrangement of WG349. Follow the WG323 manual for chain inspection, lubrication and cutting limits, even though tensioning and oil delivery are automatic. Its original-purchaser tool coverage is 24 months without timely registration or three years with it; the full conditions are below.

Check Worx WG323 on Amazon

Editor: Isaac Daniels

Worx - WG349

Choose WG349 for a dedicated pole saw with three head positions: 0, 15 and 30 degrees, plus a rear handle that rotates through 180 degrees. Worx’s FAQ says it cannot be used as a handheld chainsaw without the pole. That distinction matters more than choosing solely by bar length.

The technical table and WG349 manual specify an 8-inch bar, 16 ft/s chain speed, a 2.8-ounce oil tank and 8.8 lb with chain and bar. The kit includes a WA3575 battery, WA3881 charger, auxiliary handle and bar-and-chain sheath. The manual lists a one-hour charge; this is the kit, not the WG349.9 tool-only version.

Check the reach wording before ordering. The page advertises 13-foot total reach and its FAQ says 9 feet 4 inches overall; the manual instead gives an 83-to-110-inch machine length. The description also calls it an 18 cm saw extending to 3.6 m, while the technical table and manual say 8 inches. Confirm the physical dimensions rather than treating those descriptions as interchangeable.

Warranty: The same original-purchaser Worx tool, battery and charger conditions below apply to WG349. Do not assume that its three-year headline applies without the required registration.

Check Worx WG349 on Amazon

WEN - 4019

Choose 4019 for a corded pole saw when a suitable outdoor power connection fits the job. Its manual specifies AC 120V, 60 Hz and 6A, an 8-inch chain and a 7.2 lb tool. Skip it if managing an extension cord would defeat the reason you want a pole saw.

WEN lists an automatic oiling system, tool-free chain adjustment, shoulder strap and blade cover. The manual gives a 3-fluid-ounce oil tank and 36 ft/s no-load chain speed. No-load speed is not a measured cutting comparison. The product page’s 5.3-to-7.3-foot pole description and the manual’s 82.5-to-105-1/16-inch assembled length measure different things.

The manual names an Oregon 91P033X chain with 33 drive links, 3/8-inch low-profile pitch and 0.050-inch gauge. Match replacements to those specifications rather than assuming any 8-inch chain fits. The two-year-or-500-hour home-use warranty has exclusions, seller requirements and shipping obligations detailed below; chain wear is not covered as a defect.

Check WEN 4019 on Amazon

Worx and WEN warranty conditions

Worx’s tool warranty applies to the original purchaser and cannot be transferred. Register within 30 days, online or using the supplied card, for three-year coverage; without registration the tool has 24 months. Keep a valid receipt showing when and where it was bought. For faulty materials or workmanship, Worx chooses defective-part replacement, unit repair, or a new or reconditioned replacement. You may pay shipping both ways.

Coverage requires appropriate parts and accessories, fair wear and tear, and no misuse, abuse, neglect, alteration, modification, unauthorized repair, accident or damage from foreign objects or substances. Trade, professional and rental use are excluded. Natural wear, overload, improper maintenance or handling, and supplied accessories such as blades and bits are not covered. Repaired or replaced tools retain only the balance of the original period.

Worx separately states three years for defective batteries and chargers, with a new or reconditioned replacement at its choice and possible shipping costs both ways. Abuse, misuse, natural wear, overload and unauthorized or improper maintenance or handling are excluded. Claims go through the Worx helpline with registration documentation or a valid dated receipt. The limited warranty adds to statutory rights.

WEN’s 4019 manual limits home-use defect coverage to two years or 500 hours, whichever comes first; professional or commercial use receives 90 days. Coverage is for the original purchaser from a direct vendor of Great Lakes Technologies. Secondhand or other third-party purchases void it. Missing or damaged parts must be reported within 30 days.

Free replacement of qualifying defective parts is WEN’s sole obligation and your exclusive remedy. Misuse, alteration, careless handling, misrepair, abuse, neglect, normal wear, improper maintenance and other adverse conditions caused by others are excluded. Wear items such as belts, brushes, blades and batteries are excluded. Contact WEN with proof showing purchase date and place, shipping address, phone, serial number and required part numbers. WEN may require defective parts or the product back before sending replacements.

Service requires a WEN representative’s confirmation. The purchaser prepays return shipping, uses the original or equivalent protective container, fully insures it, and encloses proof and a problem description. Approved repairs and return shipment to the contiguous United States are free; shipments elsewhere may carry additional charges. The policy applies to sales in the United States, Canada and Puerto Rico; ask WEN about other countries.

The 4019 manual limits implied warranties to two years and excludes incidental or consequential damages, including lost profits, subject to state and Canadian provincial exceptions. Other state, provincial and national rights remain. WEN’s current web policy uses a set-period/500-hour formulation and warns that replacement-part supply problems may cause significant or indefinite delays; it does not promise a repair deadline.

Common buying questions

Which pole saw also works as a handheld chainsaw?

WG323 is the detachable option here. Worx’s WG349 FAQ says that saw cannot be used handheld without its pole.

Does advertised reach tell me machine length?

No. WG323’s manual lists a 77-to-105-inch pole, while its page advertises 12-foot reach. WG349’s page and manual also publish different length descriptions; confirm the exact machine dimensions.

Are the two 8-inch chains interchangeable?

Do not assume that. WG349 and WEN 4019 both specify 33 links, but their published chain gauges differ: 0.043 and 0.050 inch respectively.

Do the Worx kits automatically have three-year tool coverage?

Worx requires registration within 30 days for three-year tool coverage. Without registration it states 24 months; the other eligibility and exclusion terms still apply.

Sources and buying checks

Specifications and limits below come from the named manufacturer documents. Amazon listing checks established the linked model and seller; they are separate from performance evidence.

Before ordering, confirm the selected model, supplied parts, seller and current warranty. Published specifications do not establish measured performance or durability.