Seven tables, sorted by room size, the bed under the cloth and the warranty. Every size, weight and warranty term comes from the makers’ own pages and manuals, and the room math comes from Brunswick’s guide.
Written by: Isaac Daniels, owner and editor
Updated Nov 11, 2026 · Sizes, weights and warranty terms from the makers’ documents
As an Amazon Associate I earn from qualifying purchases. How this site earns
Fat Cat Reno 7.5 ft
Product photo: Amazon
Short answer
My top pick is the Playcraft Charles River: the only table here with a real 1 in., three-piece slate bed and a full 88 × 44 in. playing surface. It weighs 700 lb, and its 5-year warranty needs a pro installer. For a lighter 8 ft table, get the Barrington Arlington (252 lb); for a dining room, the Hathaway Logan.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
What “7 ft” and “8 ft” mean on a pool table
The name is rounded from the cabinet. The playing surface inside the cushions is what you play on.
Sources: WPA Recommended Equipment Specifications, section 5; Brunswick room size guide; Playcraft, Barrington and Hathaway product pages and listings.
The World Pool-Billiard Association sets a 9 ft table’s playing surface at 100 × 50 in. and an 8 ft table’s at 92 × 46 in. Brunswick, which sells home tables, lists its 8 ft at 88 × 44 in. and its 7 ft at 76 × 38 in.
So two tables both sold as 8 ft can differ by 8 in. of cloth.
My two 8 ft Playcraft picks match Brunswick’s 88 × 44 in. The Barrington Arlington, also sold as 8 ft, is 84 × 42 in. inside a 96 in. cabinet. The two Hathaway 7 ft tables come in at 74 and 75 in. long, a little under Brunswick’s 7 ft.
Fat Cat and GoSports don’t publish the number at all, so ask before you plan a room around them.
How much room a pool table needs
The room has to fit the table plus a full cue stroke on every side.
Source: Brunswick room size guide (8 ft table, 44 × 88 in. playing area, 58 in. cue: 13 × 17 ft). The arithmetic is mine.
Brunswick’s rule is the table plus a cue’s length on all four sides. With a standard 58 in. cue, an 8 ft home table at 88 × 44 in. needs a room of about 13 × 17 ft. A 7 ft table at 76 × 38 in. needs about 13 × 16 ft.
Shorter cues shrink the room. Brunswick’s chart is below the product cards, with 52 in. and 48 in. columns.
Measure from the wall, not the baseboard, and count anything that sticks into the room: a post, a radiator, a bar counter. A cue stroke stops at the first thing it hits.
If one spot falls short, Brunswick’s fix for a tight room is a shorter cue, 52 or 48 in.
Full-size tables, slate and the alternatives
Best for real slate in an 8 ft room
Playcraft Charles River 8’ slate pool table
The Charles River is Playcraft’s 8 ft slate table from its Fairfield collection. It ships from a third-party seller on Amazon, and the listing has said that seller usually ships it in 4 to 5 days. The listing carries Playcraft’s part number, PTCHRESP08.
The bed is why it leads this page. Playcraft lists 1 in. framed, book-matched slate honed to 1/1000 of an inch, and the listing title calls it a three-piece slate system. WPA asks tournament tables for the same thing: slate at least 1 in. thick, in three equal pieces, framed in wood.
The playing surface is 88 × 44 in., Brunswick’s 8 ft size and 4 in. shorter than WPA’s 8 ft. Outside, it measures 99 × 55 × 32.5 in. Brunswick’s guide puts a table this size in a 13 × 17 ft room with a standard 58 in. cue.
Playcraft builds the cabinet from select hardwoods on a base frame of laminated hardwood, with cabriole legs and carved ball-and-claw feet. The rails carry K66 gum rubber cushions, the pockets are color-matched leather, and the sights are inlaid. The listing here is the espresso stain.
It weighs 700 lb, about twice the next heaviest table here. Playcraft’s page says professional installation is required. The warranty puts it more firmly: the 5 years apply only when a verified professional or an experienced slate installer assembles the table.
Read the rest of that warranty before you order. It covers rails, aprons, legs, slate, internal supports and metal hardware. It excludes cushions, pockets and cloth. It pays for no shipping or labor, and parts damaged by moving the assembled table aren’t covered.
Releveling isn’t a defect either. Playcraft says a slate table may settle after it’s leveled and treats leveling as maintenance. Plan on an installer for the first setup, and on a second visit if you ever change rooms.
One listing detail wobbles. The title offers 25 cloth colors and a bullet says 21. Playcraft’s own page says 25, so ask the seller which colors ship before you pick one.
My call: if the room and the floor are ready, this is the table to buy once and keep. Everything else on this page is lighter, smaller or both.
Buy it if
You have a room of about 13 × 17 ft, a floor ready for 700 lb, and you want the bed tournament tables use.
Skip it if
You’ll move it within a few years or can’t hire an installer. The Fat Cat Reno is lighter and sets up at home.
Best for an 8 ft cabinet without slate weight
Barrington Billiards Arlington 8 ft pool table
The Arlington is Barrington Billiards’ claw-leg table, model BL096Y25003, made by Medal Sports.
Barrington calls it an 8 ft tournament table. The listing explains the 8 ft: the cabinet is 96 in. long. The playing surface is 84 × 42 in., which is 4 in. shorter than Brunswick’s 8 ft and 8 in. shorter than WPA’s.
That smaller surface comes with a much lighter table. It weighs 252 lb against the Charles River’s 700, and the playfield frame arrives preassembled. You attach the lower apron, leg supports, legs and leveling brackets.
The bed is 1 in. (25 mm) engineered wood, laminated on both sides. The rails and apron are MDF and engineered wood with a two-tone wood grain PVC laminate. The cloth is a 35% wool blend over K66 rubber cushions, and the pockets are leather drops.
The legs are molded plastic around an inner steel support, shaped as ball and claw. Each hides a 1.5 in. leveler, and two adjustable brackets under the playing surface help even out the playing surface.
Barrington asks for a 17.5 × 14 ft room. That’s a little larger than Brunswick’s 13 × 17 ft for a true 8 ft home table with 58 in. cues, so plan for the maker’s number if you have it.
The warranty is the shortest on a full-size pick: 90 days from the manufacturer, per the listing. The kit includes two cues and a 2.25 in. ball set, the size WPA specifies.
My call: buy it for the look of an 8 ft table where 700 lb of slate won’t work, and know the cloth is 4 in. short of a true 8 ft.
Buy it if
You want the size and look of an 8 ft table in a room or on a floor that can’t take a slate table.
Skip it if
You want a full 88 × 44 in. surface. The Charles River has it, on slate.
Best for a written flatness promise
Fat Cat Reno 7.5 ft billiard table
The Reno is Fat Cat’s 7.5 ft table, item 64-0126 from GLD Products.
Its bed is Accuslate, which GLD describes as a lightweight, affordable alternative to slate. The manual’s warranty makes a specific promise about it: the playing surface stays flat within ±0.030 in. for 7 years from purchase.
That number is worth a comparison. WPA asks a tournament slate bed to stay within ±0.020 in. lengthwise and ±0.010 in. across. Accuslate’s promise is looser than the slate rule, but it’s in writing, and no other non-slate table here puts a number on flatness.
The rest of the table carries 90 days, per GLD’s manual. Amazon’s listing says 30 days; I go by the maker. Either way, GLD says to register the table with a copy of the receipt within 10 days to validate the warranty.
Two lines in the manual end it early. The warranty is void if the table is taken apart and put back together, and it covers indoor personal residential use only. If you plan to move house with the Reno, the flatness promise won’t come along.
GLD lists 89.5 × 50.5 × 31 in. outside and 313 lb; Amazon says 335 lb. The rails are solid wood, 6 in. wide and 1.5 in. thick, with K66 bumpers and diamond inlays to aim by. The legs have built-in levelers.
Fat Cat sells it as 7.5 ft, but the manual’s own title reads “RENO 7’ Pool Table,” and neither source gives the playing surface. Plan the room as if it’s the larger size. Assembly takes about 2 hours with 2 people, per the listing, and the tools are in the box.
The kit includes two 57 in. cues, 2.25 in. balls, a resin triangle, chalk and a rail brush. GLD’s page carries a California Prop 65 warning for formaldehyde.
My call: of the non-slate cabinet tables, this is the one whose maker commits to a flat bed in numbers. Register it the week it arrives.
Buy it if
You want a cabinet table that stays put, in a room of about 13 × 17 ft to be safe, and you’d like the bed’s flatness in writing.
Skip it if
You’ll move it apart in a few years. The GoSports 7 ft folds instead, and nothing comes apart.
Tables that do two or three jobs
Best for a dining table that converts to pool
Hathaway Logan 7 ft 3-in-1 table
The Logan is Hathaway’s 7 ft table that becomes a dining table, model BG50348.
It does three jobs. A melamine dining top covers the pool table, a table tennis top goes on for ping pong, and two padded benches store cues, balls and paddles under their lift-up seats. Hathaway says each 55 in. bench seats two to three adults.
The pool table under all that is 84 × 47 × 32 in. outside with a 74 × 37 in. playing surface, 2 in. shorter than Brunswick’s 7 ft. Hathaway says to plan a 13 × 16 ft room for cue clearance, the same room Brunswick gives a 7 ft table.
Blue Wave Products, Hathaway’s parent, builds it from engineered wood in a rustic barnwood melamine finish, on cross trusses and post legs. The cloth is a nylon and wool blend over bumpers Hathaway calls “true roll”; it doesn’t name the profile.
The listing puts the set at 345 lb and assembly at about 90 minutes. Amazon’s detail table prints the size as 47 × 32 × 84 in., with length and height swapped; Hathaway’s own bullets give 84 × 47 × 32 in.
The warranty is 180 days, limited, on both Blue Wave’s page and the listing. Like the Arlington, the bed is engineered wood, not slate.
Hathaway calls the melamine-coated dining top durable and pitches it for big gatherings and family meals. With the top on, the cloth underneath stays covered between games.
My call: buy it when the table has to earn its floor space at dinner every night. If pool is the main event, a longer surface plays better.
Buy it if
The table has to be a dining table most nights and a pool table on weekends.
Skip it if
Pool is the main use. The Reno or the Arlington give you more playing surface.
Best for pool and ping pong in 7 ft
Hathaway Spartan 7 ft 2-in-1 table
The Spartan is Hathaway’s 2-in-1 table, model BG5041 from Blue Wave Products.
It’s a 7 ft pool table with a table tennis top that goes on and comes off without tools. Outside it measures 84 × 46 × 31 in. The pool surface is 75 × 37 in., 1 in. shorter than Brunswick’s 7 ft, and the tennis top covers the full 84 × 46 in.
That top is smaller than a regulation table tennis table, which the ITTF sets at 2.74 × 1.525 m, about 9 × 5 ft. Here you get about 7 × 3.8 ft. It’s a family game, not a club table, and Hathaway includes a support board so the top sits flat.
At 129 lb it’s the lightest table on this page, under half the Arlington. The bed is engineered wood under red blended wool felt, with K819 rubber cushions and drop pockets.
The accessory kit is where the fine print shows. Hathaway lists two 48 in. cues and a set of 2 in. billiard balls. WPA’s ball is 2¼ in., and every other kit on this page uses that size. Plan on a standard ball set if you play on other tables too.
The short cues have one upside. Brunswick’s chart fits a 7 ft table with 48 in. cues in an 11 ft 6 in. × 14 ft 6 in. room, against 13 × 16 ft with standard 58 in. cues.
The warranty is 180 days, limited, per the listing, the same as the Logan’s.
My call: it’s the table for a bonus room where both games get played and the table may have to go upstairs. Buy standard balls with it.
Buy it if
You want both games in a bonus room or an upstairs space, and the lightest table on this page.
Skip it if
You want full-size table tennis. A 9 × 5 ft table tennis table plays the real game; my ping pong table guide covers them.
A folding table and an outdoor table
Best for folding away with no assembly
GoSports 7 ft portable pool table
This is GoSports’ 7 ft portable table in oak, model BILLIARDS-TABLE-OAK-7-BLACK from P&P Imports.
It arrives fully assembled. GoSports’ own page says you fold the legs out and play, then fold them back to store it. No other table here skips assembly entirely.
Outside it measures 84 × 47 × 31 in. and weighs 150 lb. GoSports’ page also calls it a 7 ft × 3.5 ft table, but 47 in. is 3.9 ft. Neither the page nor the listing gives the playing surface, so I can’t put it on the size chart.
The frame is heavy-duty steel under what GoSports calls a premium felt surface; neither GoSports nor the listing names the bed material. The listing says it can go outside for a game but should always be stored indoors.
GoSports recommends a 16 × 13 ft room, close to Brunswick’s 13 × 16 ft for a 7 ft table with 58 in. cues. The kit has two 57 in. cues, 15 balls and a cue ball, a rack, two chalks and a felt brush.
The listing gives a 2-year manufacturer warranty, the longest whole-table warranty here after the Charles River’s 5 years. GoSports’ own web store marks its sales final; that’s their store’s rule, and an Amazon order follows Amazon’s return policy.
What it gives up is the adjustment. The listing doesn’t mention leg levelers, so an uneven floor stays uneven unless you shim the feet. Check the floor with a level before you choose the spot, because the table can’t correct it for you.
My call: buy it when the room has other jobs, like a garage, a basement playroom or a spare room that still hosts guests. It’s the only pick you can fold out of the way.
Buy it if
The table can’t stay up full time, like a garage that still parks a car or a basement that hosts other things.
Skip it if
It will stay set up for years. The Reno is built to stay put and has levelers.
Best for a covered patio or deck
Playcraft Extera 8’ outdoor pool table
The Extera is Playcraft’s 8 ft outdoor table, model PTEXEB08. It ships from a third-party seller on Amazon, and the listing has said that seller usually ships it in 4 to 5 days.
Everything that faces the weather is chosen for it. The rails, aprons and legs are extruded aluminum with an anti-rust treatment, the bed is a 1 in. composite Playcraft calls weatherproof, and the cloth is a UV-resistant polytech.
The playing surface is 88 × 44 in., the same as the Charles River’s, inside a 99 × 55 × 31.5 in. frame. The top rails are 5⅞ in. wide, the cushions are K66, and 6 in. adjustable feet level it on an uneven patio.
Playcraft lists 326 lb for the table and 486 lb as shipped, on a 110 × 60 × 13 in. pallet. Amazon’s detail table shows 102 × 57 × 7 in. and 433 lb; I use Playcraft’s figures.
The 1-year warranty has a line every outdoor buyer should read. It covers defects in materials and manufacturing, and it excludes conditions caused by acts of nature. Rain and sun are why you’d buy this table, and damage from a storm isn’t covered.
Moving damage is excluded too, as with Playcraft’s slate table. Set it where it will live, on a level, solid surface, and use the 6 in. adjustable feet to take out any slope that remains.
The kit has two 57 in. composite cues, phenolic 2¼ in. balls, a plastic rack, a cloth brush, chalk and a PVC cover. Use the cover every time the table isn’t in play.
My call: it’s the pick for a covered patio, deck or pool house. In a fully open yard, the cover does more work than the table.
Buy it if
The table lives on a covered patio, deck or pool house, and you’ll keep the cover on between games.
Skip it if
It goes indoors. The Charles River has the same surface size on slate.
The seven picks compared
From the makers’ pages, manuals and listings. On a phone, each pick becomes its own card.
Only the Charles River and the Extera have a published 88 × 44 in. surface, Brunswick’s 8 ft. Only the Charles River is slate.
Room size by table and cue length
Brunswick’s minimum room for each table size. Shorter cues fit smaller rooms.
Table (playing surface)
58 in. cue
52 in. cue
48 in. cue
7 ft (76 × 38 in.)
13 × 16 ft
12 × 15 ft
11 ft 6 in. × 14 ft 6 in.
8 ft (88 × 44 in.)
13 × 17 ft
12 ft × 15 ft 6 in.
11 ft 2 in. × 15 ft
Oversize 8 ft (92 × 46 in.)
13 ft 6 in. × 17 ft 6 in.
12 ft 6 in. × 16 ft 6 in.
12 × 16 ft
9 ft (100 × 50 in.)
14 × 18 ft
12 ft 6 in. × 16 ft 6 in.
12 × 16 ft
Brunswick calls 58 in. the standard cue. Most kits on this page include 57 in. cues, close enough to use the first column. The Spartan’s 48 in. cues fit the last column.
Brunswick’s oversize 8 ft is the same 92 × 46 in. that WPA calls 8 ft.
Three makers print their own room size. Barrington asks 17.5 × 14 ft for the Arlington, Hathaway 13 × 16 ft for the Logan, and GoSports 16 × 13 ft for its 7 ft. Those land within a foot of Brunswick’s chart.
Where a maker’s figure is bigger than Brunswick’s, plan for the maker’s.
Slate or not, and what’s under the cloth
Listings use slate-sounding names for beds that aren’t slate. Here’s what each pick is made of.
Pick
Bed
Thickness
What the maker calls it
Playcraft Charles River
Natural slate, 3 pieces, framed
1 in.
“Framed book matched slate honed to 1/1000th of an inch”
Fat Cat Reno
Accuslate
Not published
“A lightweight and affordable alternative to slate”
Barrington Arlington
Engineered wood, laminated both sides
1 in. (25 mm)
Playing surface of engineered wood
Hathaway Logan
Engineered wood
Not published
Engineered wood construction
Hathaway Spartan
Engineered wood
Not published
Engineered wood bed
GoSports 7 ft
Not published (steel frame)
Not published
Premium felt surface
Playcraft Extera
Composite, weatherproof
1 in.
“1 in. composite weather proof playfield”
WPA’s rule for tournament tables is slate at least 1 in. thick, in three equal pieces, each framed with at least ¾ in. lumber and screwed to the base. The finished surface must stay flat within ±0.020 in. lengthwise and ±0.010 in. across.
Only the Charles River is built that way.
Other listings borrow the word. One Barrington 7.5 ft table I read for this guide sells “Slate-Tech,” which the listing defines as 8 mm of Slate-Tech over 18 mm of plywood. That’s a layered board, not a slab of stone.
When a listing says slate, look for the thickness and the piece count. Real slate tables print both.
Cloth, cushions, rails and pockets
The bed decides whether a table is flat. The cloth, the cushions and the pockets decide how it plays.
Cloth
WPA’s tournament cloth is a non-directional, nap-free billiard fabric of 80 to 85% combed worsted wool and 15 to 20% nylon, and the association prefers 100% worsted wool. It also asks for cloth that will not pill or fluff, and it bans backed cloth.
The picks list home blends. The Arlington has a 35% wool cloth, the Logan a nylon and wool blend, the Spartan red blended wool felt and the Extera a UV-resistant polytech made for the outdoors. The Charles River comes in 25 cloth colors, and the pages I read don’t give its wool content. Fat Cat and GoSports don’t name a blend.
None of these is tournament cloth, and a home table doesn’t need it. If you recover a table later, WPA’s numbers are the ones to ask a cloth maker about.
Cushions
WPA wants triangular rubber cushions, with the cushion nose at 62½ to 64½% of the ball’s diameter above the bed. For a 2¼ in. ball, that works out to about 1.41 to 1.45 in. The cloth-covered cushion should be 1⅞ to 2 in. deep from the featherstrip to the nose.
Four picks name K66 rubber: the Charles River, Arlington, Reno and Extera. The Spartan names K819. Hathaway doesn’t name the Logan’s profile, and GoSports doesn’t name its table’s.
The cushion test WPA uses
Put a ball on the head spot. With a level cue, a center hit and a firm stroke, shoot it through the foot spot. On cushions in good shape it travels at least 4 to 4½ lengths of the table without jumping.
Run it when the table is new, then once a year. If the count drops over the years, the rubber is the first thing to ask an installer about.
Rails and sights
WPA allows rails 4 to 7½ in. wide, cushions included, with 18 sights set flush in the rail cap. The Reno’s solid wood rails are 6 in. wide and the Extera’s top rails 5⅞ in., both inside that range. The Charles River’s sights are inlaid, and the Reno’s are diamond inlays.
Pockets
On a WPA table the corner pocket mouth, measured between the cushion points, is 4.5 to 4.625 in., and the side pocket mouth 5 to 5.125 in., about ½ in. wider. Home makers don’t print these numbers. A tape measure across the cushion points on the delivered table tells you how forgiving its pockets are.
WPA also asks drop pockets to hold at least 6 balls and liners that won’t stain the balls. The Charles River and the Arlington use leather drop pockets, and the Spartan has drop pockets too.
Pool table weight and moving
From 129 lb to 700 lb across the picks. The weight decides who sets it up and whether it can move.
Sources: Playcraft product pages; GLD Products Reno page; Hathaway, Barrington and GoSports listings on Amazon.
The Charles River’s slate ships in a crate of its own, 46 × 37 × 6 in., and the whole table weighs 700 lb. Playcraft’s warranty says not to move the table once it’s assembled, and parts damaged in a move aren’t covered.
Moving a slate table means taking it apart, so plan an installer at both ends.
The lighter tables have their own rules. GLD voids the Reno’s warranty if it’s taken apart and put back together. Playcraft excludes moving damage on the Extera as well.
The GoSports is the only pick built to move: fold the legs and store it, at 150 lb.
Before the delivery truck comes
The slate pick here weighs 700 lb, and even the light tables arrive as long, heavy boxes. Run these checks before you order.
1
Measure the path, not just the room
Measure every door, hall turn and stair between the truck and the room. The Charles River’s slate alone ships in a 46 × 37 × 6 in. crate, and the Extera arrives on a 110 × 60 × 13 in. pallet.
2
Know the weight on the floor
The picks run from 129 lb for the Spartan to 700 lb for the Charles River, with the non-slate cabinet tables at 252 to 345 lb. On an upper floor, the slate table’s weight is the number to plan around.
3
Book the installer before the table
Playcraft’s 5-year warranty on the Charles River applies only when a verified professional or an experienced slate installer assembles it. Set the date before the table ships.
4
Open and photograph every box
Playcraft says to stop and report damaged parts before you build, and it asks for clear photos with any claim. GLD needs a return authorization number before anything ships back.
5
Plan two people for the build
The Reno’s listing gives about 2 hours with 2 people, and the Logan’s about 90 minutes. The Arlington’s playfield frame arrives preassembled, and the GoSports needs no assembly at all.
6
Choose the spot for good
Playcraft doesn’t cover damage from moving an assembled table, and GLD voids the Reno’s warranty if it’s taken apart and put back together. Pick the final spot, check it with a level, then build there.
What each warranty covers
The length on the box is the headline. The exclusions decide what you’re really covered for.
Pick
Length
What’s left out
The catch
Source
Playcraft Charles River
5 years
Cushions, pockets, cloth; shipping and labor
Pro install required; moving damage not covered
Playcraft warranty
Fat Cat Reno
90 days; bed flat ±0.030 in. for 7 years
Felt, wear items
Register in 10 days; void if taken apart; indoor home use only
GLD manual
Hathaway Logan
180 days
Not detailed
Limited warranty
Blue Wave page, listing
Hathaway Spartan
180 days
Not detailed
Limited warranty
Listing
GoSports 7 ft
2 years
Not detailed
Stated on the listing only
Listing
Barrington Arlington
90 days
Not detailed
Stated on the listing only
Listing
Playcraft Extera
1 year
Acts of nature, age, moving damage
Weather damage on an outdoor table
Playcraft warranty
Both Playcraft warranties and GLD’s cover the original buyer only and can’t be passed on. Both makers want any damage found before assembly: Playcraft says to stop and report damaged parts before you build, and GLD needs a return authorization number before anything ships back.
Playcraft asks for clear photos with any claim, so photograph every box when it arrives.
Neither maker pays shipping on a claim. GLD says you ship the unit at your own expense if they ask for it back, and Playcraft’s warranty excludes shipping and labor costs.
On a table of 300 lb or more, price that freight before you file.
“Tournament” and “regulation” on a listing
The words in the title against the playing surface the maker publishes.
Pick
Listing words
Playing surface
Against WPA and Brunswick
Barrington Arlington
“8 Ft Tournament,” “tournament-size playfield”
84 × 42 in.
8 in. under WPA 8 ft; 4 in. under Brunswick 8 ft
Playcraft Charles River
“Meets BCA standards”
88 × 44 in.
Brunswick 8 ft; 4 in. under WPA 8 ft
Playcraft Extera
“8’”
88 × 44 in.
Brunswick 8 ft; 4 in. under WPA 8 ft
Hathaway Logan
“Tournament-Level Play”
74 × 37 in.
2 in. under Brunswick 7 ft
Hathaway Spartan
“7 ft”
75 × 37 in.
1 in. under Brunswick 7 ft
Fat Cat Reno
“7.5 Ft” (manual: “7’”)
Not published
Can’t compare
GoSports 7 ft
“7 ft”
Not published
Can’t compare
WPA’s specs set two sizes, 9 ft and 8 ft, for its events, and say they don’t necessarily apply to tables made for home use. So “tournament” on a home table is a selling word, not a rating.
BCA is listed among WPA’s member bodies. Playcraft doesn’t say which BCA standard the Charles River meets.
WPA also sets the bed height at 29¼ to 31 in. and the balls at 2¼ in. across. Makers here list overall height, not bed height, so a tape measure on the delivered table is the only check.
The Spartan’s 2 in. balls are the one spec on this page that clearly misses WPA.
Where each table is allowed to live
What the makers say about weather, garages and storage.
Pick
Maker’s rule
Source
Playcraft Extera
Outdoor table: aluminum frame, composite bed, UV-resistant cloth, cover included
Playcraft page
GoSports 7 ft
Can be played outdoors; always store indoors
Listing
Fat Cat Reno
Warranty covers indoor personal residential use only
GLD manual
Playcraft Charles River
Hardwood and slate, built to stay in one room
Playcraft page
Hathaway Logan, Spartan; Barrington Arlington
Indoor game tables; no outdoor use listed
Listings
A garage or a three-season porch isn’t a heated room. GoSports says to store its table indoors, and GLD’s warranty covers indoor home use only, so read “indoors” as inside the house.
If the room isn’t heated and cooled with the house, the Extera is the table built for it, cover on.
Light over the table
WPA’s event rules give a useful floor for a game room.
WPA asks for at least 520 lux, or 48 footcandles, at every point of the bed and rails, and it doesn’t want the center of the table much brighter than the rails and corners. A single bright bulb in the middle does the opposite. A long fixture that spreads light over the whole playing surface does what WPA describes.
The height rule is strict. A light that can be moved aside hangs no lower than 40 in. above the bed, and a fixed light no lower than 65 in. With WPA’s bed height of 29¼ to 31 in., a fixed fixture’s bottom would sit about 94 to 96 in. off the floor.
That is about the height of an 8 ft ceiling, so in a room with an 8 ft ceiling a hanging fixture will sit lower than WPA’s event rule. That’s fine at home. Keep the light even along the table, and keep it high enough that a player standing at the rail doesn’t look into the bulbs.
WPA puts the start of blinding light at 5,000 lux in direct view. Below that, the goal is even light across the cloth.
What the money buys
Prices move every day, so the cards show today’s figure from Amazon. What changes from table to table is what you’re paying for.
Across the seven picks, the money buys one of four things. The GoSports buys a table that folds away with no assembly. The Hathaway combos buy extra games or a dining top on one frame. The Arlington and the Reno buy a full cabinet table without the weight of slate. The Extera buys a frame and bed built for weather.
The Charles River is the one that buys real slate, and slate brings a second cost with it: the installer Playcraft requires for the warranty, and a second visit if the table ever changes rooms.
Count the cart, not just the table
Every kit here includes cues and balls. The Spartan’s kit has 2 in. balls and 48 in. cues, so add a standard 2¼ in. set and full-length cues if you play on other tables.
WPA recommends a wooden triangle rack. It says plastic racks flex and deform, and the Reno and Extera kits ship with resin and plastic racks.
For cleaning, WPA recommends a soft horsehair brush or a vacuum without a rotating brush, and it says brushes that shed bristles aren’t recommended.
A table that lives outside needs its cover on between games. The Extera includes a PVC cover; an indoor table benefits from one too.
Where the listings and the makers disagree
Places where a listing, a maker’s page and a manual don’t match, and what this page goes by.
Topic
One source says
The other says
Go by
Reno size
Listing and GLD page: 7.5 ft
GLD manual title: “RENO 7’ Pool Table”
Plan for the larger size
Reno warranty
Amazon: 30 days
GLD manual: 90 days, bed flat for 7 years
GLD manual
Reno weight
Amazon: 335 lb
GLD page: 313 lb
GLD page
Arlington size
Title: 8 ft
Bullets: 96 in. cabinet, 84 × 42 in. playfield
84 × 42 in. surface
GoSports width
GoSports page: 7 ft × 3.5 ft
Same page: 84 × 47 in. (3.9 ft)
84 × 47 in.
Logan size
Amazon detail table: 47 × 32 × 84 in.
Hathaway bullets: 84 × 47 × 32 in.
84 × 47 × 32 in.
Extera weight
Amazon: 433 lb, 102 × 57 × 7 in.
Playcraft: 326 lb table, 486 lb shipped
Playcraft
Charles River colors
Listing bullet: 21 cloth colors
Title and Playcraft page: 25
Playcraft: 25
The Reno rows matter most. A buyer reading only the Amazon listing would think the warranty is 30 days and miss the 7-year flatness promise and its 10-day registration rule. GLD’s manual is the document that binds the maker, so this page uses it.
Which pool table fits your home?
Question
If yes
If no
Is your room at least 13 × 17 ft, with the cue stroke clear all round?
An 8 ft: Charles River or Extera
A 7 ft pick, or shorter cues
Can the floor and the stairs handle 700 lb, plus an installer?
Playcraft Charles River
Reno, Arlington or a combo table
Will you move house in the next few years?
GoSports 7 ft, or plan an installer
Any cabinet table
Does the table have to be a dining table too?
Hathaway Logan
A pool-only table
Do you want ping pong on the same table?
Hathaway Spartan or Logan
A pool-only table
Does it live on a patio, deck or pool house?
Playcraft Extera
Any indoor pick
Does the room have other jobs most of the week?
GoSports 7 ft, folds away
A cabinet table
Start with the room, then the floor, then the use. A table that doesn’t leave room for the cue stroke is a table you’ll stop playing.
Playcraft says to find any damaged or defective parts before assembly, and not to build the table if you find one.
2
Don’t move it assembled
Playcraft warns that moving an assembled table can cause injury and damage, and doesn’t cover it.
3
Register the Reno in 10 days
GLD needs the registration form and a copy of the receipt within 10 days to validate the warranty.
4
Use the levelers
The Arlington has 1.5 in. hidden levelers, the Reno built-in ones and the Extera 6 in. feet. Level after the table settles.
5
Keep the balls clean
WPA says to clean balls with a towel or soap and water, and not to wax or polish them.
6
Cover it between games
The Extera ships with a PVC cover. On an indoor table, a cover keeps dust and sun off the cloth.
Leveling is the job owners repeat most. Playcraft says a slate table can settle after it’s leveled and that releveling is maintenance, not a defect.
Check with a level across the middle and along each rail a few weeks after setup, then adjust the feet.
Questions people ask
What’s the best pool table for home?
For a room of about 13 × 17 ft with a floor that takes 700 lb, the Playcraft Charles River: 1 in. three-piece slate and an 88 × 44 in. playing surface. For a lighter table, the Fat Cat Reno; for a dining room, the Hathaway Logan.
How much room do you need for a pool table?
Brunswick lists about 13 × 16 ft for a 7 ft table and 13 × 17 ft for an 8 ft table with standard 58 in. cues. With 48 in. cues, a 7 ft table fits 11 ft 6 in. × 14 ft 6 in.
What size is a regulation pool table?
WPA sets a 9 ft table’s playing surface at 100 × 50 in. and an 8 ft table’s at 92 × 46 in. Home 8 ft tables are often 88 × 44 in., the size Brunswick lists.
How big is a 7 ft pool table?
Brunswick’s 7 ft has a 76 × 38 in. playing surface. The 7 ft tables here run 84 × 46 to 84 × 47 in. outside, with surfaces of 74 to 75 in. long where the maker publishes it.
How much does a pool table weigh?
Across these picks, 129 lb for the Hathaway Spartan up to 700 lb for the Playcraft Charles River with its slate. Non-slate cabinet tables here weigh 252 to 345 lb.
Is a slate pool table worth it?
Slate is what WPA requires for tournament tables: at least 1 in. thick, in three framed pieces. It’s also heavy, needs a pro installer for Playcraft’s warranty, and is hard to move. WPA holds tournament slate to ±0.020 in. lengthwise, tighter than the Reno’s ±0.030 in. promise.
What is Accuslate?
Fat Cat’s name for its non-slate bed. GLD calls it a lightweight, affordable alternative to slate and warrants the Reno’s Accuslate surface flat within ±0.030 in. for 7 years.
Is “Slate-Tech” real slate?
No. The Barrington listing I read defines it as 8 mm of Slate-Tech over 18 mm of plywood. Real slate tables list the slate’s thickness, usually 1 in., and the number of pieces.
Can you move a pool table?
Fold-up tables like the GoSports 7 ft are built to move. Playcraft says not to move an assembled slate table and doesn’t cover moving damage, and GLD voids the Reno’s warranty if it’s taken apart and rebuilt.
Can a pool table go outside?
Only one built for it. The Playcraft Extera has an aluminum frame, a composite bed and UV-resistant cloth, with a cover included. Its warranty excludes acts of nature, so keep it covered.
Are pool and dining combo tables any good for pool?
They play on a shorter surface. The Hathaway Logan’s is 74 × 37 in., 2 in. shorter than Brunswick’s 7 ft, with an engineered wood bed. They suit homes where the table is a dining table most nights.
What size are pool balls?
WPA sets them at 2¼ in. across and 5½ to 6 oz. Most kits on this page include 2.25 in. balls; the Hathaway Spartan’s kit lists 2 in. balls.
What cloth do tournament pool tables use?
WPA asks for a non-directional, nap-free billiard cloth of 80 to 85% combed worsted wool and 15 to 20% nylon, and it prefers 100% worsted wool. The home tables on this page list blends such as the Arlington’s 35% wool cloth.
How do you check pool table cushions?
Use WPA’s test: put a ball on the head spot, shoot it through the foot spot with a level cue, a center hit and a firm stroke, and count. Good cushions send it at least 4 to 4½ table lengths without jumping.
How high should a light hang over a pool table?
WPA asks for at least 520 lux at every point of the bed and rails. A fixed light should hang no lower than 65 in. above the bed, and one that can be moved aside no lower than 40 in.
How I pick pool tables
How I pick
I picked one table for each kind of home: a slate table, a light 8 ft cabinet, a non-slate table with a written flatness promise, a dining combo, a pool and ping pong combo, a folding table and an outdoor table.
Each listing was opened and matched to the maker’s model, and each pick’s Amazon listing was checked again for this update. Prices on the page come from Amazon and show the time they were checked.
Sizes come from WPA’s equipment specifications and Brunswick’s room guide. Product facts come from Playcraft’s and GLD’s pages and manuals, Blue Wave’s page for Hathaway, and the makers’ own Amazon stores where no maker page exists. Nothing on this page is copied from customer reviews.
Why trust me
I’m Isaac Daniels, and I own and edit Plain Buy Guides. Picks are built from the makers' specs, manuals, and safety-agency guidance.
Every number on this page traces to a named document in the list below, and where a listing and a maker disagree, the conflict is shown above with the source I used.
I don’t score or star products. Each pick is matched to the kind of home it suits, with its tradeoff written out.
Sources
World Pool-Billiard Association, Recommended Equipment Specifications (effective November 2001): sections 2 (bed height), 4 (slates), 5 (playing surface), 6 to 9 (rails, cushions, pockets), 12 (cloth), 14 (cleaning), 15 (lights), 16 (balls and rack), 17 (cues)
Brunswick Billiards, Pool Table Room Size Guide: How Much Space Do You Need?
Playcraft, Charles River 8’ Slate Pool Table product page and slate table warranty
Playcraft, Extera 8’ Outdoor Pool Table product page and game table warranty