As an Amazon Associate I earn from qualifying purchases. Our product guides include affiliate links to Amazon.
Roofing nails buying guide
Roofing nails: choose the coil your job and nailer need
For a roofing nailer, choose the required nail length and coil format before the brand. Compare Metabo HPT 12111HPT for a specified 1-1/4-inch high-wire coil, Grip-Rite GRCR4DGAL for 1-1/2-inch coils, and GRCR5DGAL for 1-3/4-inch coils. All three are smooth-shank, electrogalvanized options; skip this shortlist when your job calls for loose hand-driven nails, ring shanks or another coating.
Prepared October 18, 2026 from manufacturer product pages, catalogs and exact Amazon listing checks. We compared published specifications.
Choose roofing nails by the specified length and coil
Start with the exact fastener requirement for the job, then compare the nailer’s permitted format. The three options below vary in length and maker-stated angle.
Three linked coil options from two makers. Each checked box contains approximately 7,200 nails; confirm the selected model and pack again before ordering.
1-3/4 x .120 inch; 15-degree, electrogalvanized smooth-shank coil; 7,200 per box.
Choose this length only when the job and tool call for it. GRCR5DRGAL and GRCR5DHDG are different shank or coating entries.
Check the code, coating and nailer format
Length is a separate choice: Grip-Rite’s catalog lists GRCR4DGAL at 1-1/2 inches and GRCR5DGAL at 1-3/4 inches, both with .120-inch shanks. Metabo HPT 12111HPT is 1-1/4 x .120 inch. Equal diameter does not make the lengths interchangeable.
Keep the suffix: Grip-Rite’s catalog separates GRCR4DGAL smooth-shank electrogalvanized nails from GRCR4DRGAL ring-shank electrogalvanized nails and GRCR4DHDG smooth-shank hot-dipped galvanized nails. Read the full box code rather than buying from the length alone.
Preserve each maker’s angle: Grip-Rite calls its coil roofing range 15-degree. Metabo HPT’s 12111HPT product page and catalog call this a 16-degree high-wire roofing coil. Check your nailer manual before substituting one format for the other.
Do not apply a tool approval to nails: Metabo HPT’s page limits its ICC-ES evaluation and ISANTA statements to framing and metal-connector products.
Exact coil roofing nail models
Metabo HPT - 12111HPT
Choose 12111HPT when your job specifies a 1-1/4-inch smooth-shank, electrogalvanized high-wire roofing coil and your nailer accepts that format. The maker lists a .120-inch diameter, full round head, wire collation and approximately 7,200 nails per box.
Metabo HPT explicitly identifies NV45AB2 compatibility and describes this nail as 16-degree. Its catalog prints the same exact 12111HPT code and high-wire description. Keep that designation when checking your tool; this guide does not certify other nailer combinations.
Skip for these materials: The maker says not to use this model in cedar, redwood, treated wood or exposed applications.
Warranty: The US product specification table states “Manufacturer Warranty: None.” The warranty for a Metabo HPT nailer is not coverage for this box of nails.
Pack check: Confirm 12111HPT and approximately 7,200 nails in the selected listing, rather than a similarly sized siding nail or a different wire-coil code.
Choose GRCR4DGAL when the required nail is a 1-1/2-inch smooth-shank electrogalvanized roofing coil and the nailer accepts that specification. Grip-Rite’s product table and fastening catalog both print GRCR4DGAL, a .120-inch diameter and 7,200 nails per box.
This belongs to Grip-Rite’s 15-degree coil roofing range. Its catalog separately lists GRCR4DRGAL with a ring shank and GRCR4DHDG with a hot-dipped galvanized coating. Those similar codes are different choices, so keep the complete suffix when comparing the listing and box.
Main limit: No ring shank or hot-dipped galvanized coating is established for GRCR4DGAL. Skip it if either is required.
Guarantee: Grip-Rite's Jam Free Guarantee covers eligible collated roofing nails under the conditions below; it is not a promise of corrosion life or roof performance.
Choose GRCR5DGAL when the specified length is 1-3/4 inches and the nailer accepts this smooth-shank electrogalvanized roofing coil. The maker’s product table and fastening catalog both identify the exact code, .120-inch diameter and 7,200-nail box.
Grip-Rite identifies its roofing coil range as 15-degree. GRCR5DGAL changes the length from GRCR4DGAL while retaining the smooth shank and electrogalvanized finish shown in the maker’s table. Choose the required length, rather than treating the longer nail as a general upgrade.
Main limit: The maker lists ring-shank GRCR5DRGAL and hot-dipped GRCR5DHDG separately. Do not order GRCR5DGAL expecting either of those specifications.
Guarantee: The same conditional Jam Free Guarantee applies; check that the tool is designed for this specific fastener type, size, angle and gauge.
Grip-Rite's Jam Free Guarantee applies to collated framing, roofing and siding/fencing nails. It guarantees proper loading, feeding and actuation in tools designed for the specific fastener. The original purchaser should first return unsatisfactory fasteners to the selling retailer and request a refund or replacement.
When the retailer's return window has expired, the original purchaser may claim replacement product directly from PrimeSource within six months from purchase if the fasteners fail to load, feed or actuate in a tool designed for the purchased type, size, angle and gauge. The maker provides an online claim form.
Metabo HPT's US product table lists no manufacturer warranty for the 12111HPT nails.
Common buying questions
Which of these roofing nails fits an NV45AB2?
Metabo HPT explicitly names NV45AB2 compatibility for 12111HPT. Grip-Rite’s feeding guarantee requires a tool designed for the specific fastener type, size, angle and gauge. Check the nailer manual before choosing either Grip-Rite code.
Are the 15-degree and 16-degree coils interchangeable?
That is not established here. Grip-Rite calls its roofing coils 15-degree; Metabo HPT calls 12111HPT a 16-degree high-wire coil. Preserve those designations and check your exact tool’s permitted fasteners.
Does GRCR4DGAL have a ring shank?
No. The maker’s table identifies GRCR4DGAL as smooth shank. GRCR4DRGAL is the separate ring-shank electrogalvanized entry; GRCR4DHDG is the separate smooth-shank hot-dipped galvanized entry.
Can I use 12111HPT in cedar or treated wood?
The maker says not to use 12111HPT in cedar, redwood, treated wood or exposed applications. Do not select it when your job falls within any of those exclusions.
Does the Jam Free Guarantee cover corrosion?
The cited policy addresses loading, feeding and actuation under its stated tool-fit and purchaser conditions. It does not establish corrosion coverage or a roof-life promise for GRCR4DGAL or GRCR5DGAL.
Sources and buying checks
Exact listing models and New seller offers were checked October 18, 2026 through the Amazon Creators API; checked offers included sellers other than Amazon.com. Confirm model, pack and seller again before ordering; no delivery or availability promise is made.
Grip-Rite model identity and specifications: Coil roofing nail product and SKU table (grip-rite.com), Fastening Systems catalog, printed page 45 (PDF page 47) (grip-rite.com).
Grip-Rite guarantee: Jam Free Guarantee, complete conditions (grip-rite.com).
Metabo HPT exact model and limits: 12111HPT US model specifications and warranty field (metabo-hpt.com), Pneumatic catalog 2023, printed page 32 (PDF page 33) (metabo-hpt.com).
Maker documents were opened October 18, 2026. The catalog editions keep their own dates. Check the roofing specification and the exact nailer manual; this guide compares products and does not provide a fastening schedule or installation instructions.