As an Amazon Associate I earn from qualifying purchases. Our product guides include affiliate links to Amazon.
RV leveling blocks: confirm the stack and tire support
The selected Lynx pack includes ten blocks and a cap. Camco’s standard and XL packs provide ten blocks with different nominal footprints and T-handle storage. Choose by the loaded RV’s allowed support arrangement, tire contact and exact stacking instructions. A wider block or a large marketing weight figure is not a complete support rating for your configuration.
Checked October 14, 2026 against the named brand Amazon listings and primary sources below. We compared published specs and fit limits; picks are built from the makers' published specs and manuals.
Loaded weight, tire/support geometry and the vehicle’s allowed leveling arrangement.
Ground
Product-permitted surface and complete support under the required stack.
Stack
Exact product instructions, configuration capacity, lift and separate chocking requirements.
Tri-Lynx says not to combine its products with other brands, wood or stones. Leveling, stabilization and chocking are different requirements.
The picks, and why
Blocks with a flat cap: Lynx Levelers 00015
Tri-Lynx’s selected listing names ten Leveler blocks, one Lynx Cap and a storage bag. The maker gives an 8.5-inch-square block footprint, 1.5-inch physical thickness and one-inch interlocked lift; the cap is a separate top component.
The maker product page recommends no more than five inches of stack, while its FAQ uses 5.5 inches for a leveling pyramid and a different stabilizing limit. Do not apply the higher stabilizing figure to wheel leveling. Confirm the current 00015 instructions and configuration before buying or stacking.
Selected inventory
10 blocks + 1 cap + bag
Maker footprint
8.5 × 8.5 in
Maker interlocked lift
1 in per block
Watch for: Maker stack wording differs between page and FAQ; confirm the exact current configuration.
Camco’s exact current shop page confirms 21022 and a yellow ten-pack with T-handle. The selected brand listing gives an 8.5 × 8.5-inch footprint and a 4.5-inch maximum stack.
Its title says one-inch thickness while a bullet says 1.5 inches; that is not a basis for computing actual assembled lift. Get the current stack chart and loaded-vehicle application from the supplied instructions. No numerical load capacity for your arrangement is established by the checked current shop page.
Selected count
10
Listing footprint
8.5 × 8.5 in
Listing maximum stack
4.5 in
Watch for: Thickness wording conflicts; confirm assembled lift and configuration capacity with Camco.
Camco’s current shop page confirms 21026 and the XL gray format. The selected brand listing names ten blocks, a 10.5 × 10.5-inch footprint, one-inch nominal thickness and a 4.5-inch maximum stack.
Choose the larger footprint only when it matches the required tire/support contact and allowed application. It is not evidence of a higher capacity for your setup. Shop shipping dimensions are not the installed block dimensions; obtain the current application and stack instructions before use.
Selected count
10
Listing footprint
10.5 × 10.5 in
Listing maximum stack
4.5 in
Watch for: Wider footprint does not establish configuration capacity; exact loaded-RV permission required.
Published details from the named brands; confirm the exact variant before ordering.
Pick
Choose it for
Check first
Lynx Levelers 00015
Blocks with a flat cap
Maker stack wording differs between page and FAQ; confirm the exact current configuration.
Camco FasTen 21022
Standard FasTen footprint
Thickness wording conflicts; confirm assembled lift and configuration capacity with Camco.
Camco FasTen XL 21026
XL FasTen footprint
Wider footprint does not establish configuration capacity; exact loaded-RV permission required.
Read the stack configuration, not loose block thickness
A block’s physical height differs from its interlocked lift. Lynx also publishes different leveling/stabilizing guidance, and Camco’s standard listing has conflicting thickness wording. Confirm the supplied instructions before planning height; do not add raw dimensions or use a stabilizer limit as a wheel-leveling allowance.
Get the support permission for the loaded vehicle
The maker and selected listing descriptions do not establish every stack’s load capacity. Obtain the loaded-vehicle/configuration confirmation before purchase. Tri-Lynx warns against sinking mud and large rocks beneath the stack and against mixing systems. Follow the RV’s separate chocking and support instructions.
Questions
Can I mix Lynx and Camco in one stack?
Tri-Lynx expressly does not recommend mixing its products with other brands or wood/stones.
Does XL automatically mean a higher capacity?
No capacity for your configuration is established by that label. Obtain exact maker and RV permission.
Tri-Lynx product guidance (trilynx.com) — Block footprint/lift and page stack recommendation; selected cap-pack count from listing.
Tri-Lynx FAQ (trilynx.com) — Different configuration limits, ground and system-mixing restrictions.
Camco current 21022 (camcooutdoors.com) — Exact selected-model identity; shipping dimensions not installed dimensions.
Camco current 21026 (camcooutdoors.com) — Exact XL identity; selected physical details from brand listing.
Listing details and availability can change. Our recommendations are built from the makers' published specs and manuals. All three checked New offers were sold by Amazon.com. Recheck the selected variant, seller and stock status before ordering.