As an Amazon Associate I earn from qualifying purchases. Our product guides include affiliate links to Amazon.
RV sewer hose supports: plan the whole route
Choose Camco Sidewinder for a 10 ft folding run, Valterra Slunky for a 15 ft folding support with published end heights, or Camco Rhino for separate nesting sections. Measure the connected hose path and elevation first; a support cannot by itself establish a downhill route to the inlet.
Checked October 14, 2026 against the named brand Amazon listings and primary sources below. We compared published specs and fit limits; picks are built from the makers' published specs and manuals.
Length, diameter and maker’s support requirements.
Route
Actual bends, obstacles and position of the approved inlet.
Elevation
Outlet/inlet heights and ground along the complete run.
Storage
Folding length or nesting footprint, kept separate from potable equipment.
Follow the RV, hose and site instructions. No fixed slope or universal campground rule is invented here.
The picks, and why
Short folding run: Camco Sidewinder 43031
Camco's selected 43031 listing describes a folding/telescoping plastic support for a 10 ft, 3-inch-diameter RV sewer hose. Its flexible shape can be arranged around obstacles within the actual available reach.
The included carry handle and compressed storage format are useful when packing between sites. The small dimensions on the current maker product page describe the stored product, not the extended route or its full working height.
Exact item
43031
Listed hose fit
Up to 10 ft; 3 in diameter
Watch for: Confirm the installed route, support orientation and current instructions. A hose and inlet adapter are separate equipment.
Valterra specifies a 15 ft support with a 7-inch RV end and 4.5-inch sewer end. It describes metal hinges, a ridged base and six included tie-down straps.
Those end heights are not an adjustable slope guarantee for every campsite. Check the real inlet elevation and complete hose path, including bends and any remaining low spots. Follow the current setup instructions for securing the hose.
Length
15 ft
Maker end heights
RV 7 in; sewer 4.5 in
Watch for: Actual ground and inlet geometry control. Confirm the selected black S1500 package and included straps.
Camco's brand listing supplies five nesting sections for hose up to 15 ft long and 3 inches in diameter. It gives each section as 24-3/16 inches long and 9.5 inches wide, with heights from 8.5 to 10.5 inches.
Five sections are not fifteen feet of continuous track. Their placement needs to support the actual hose without assuming an unsupported span is acceptable. The nesting format is the distinction from linked folding supports.
Package
Five nesting sections; strap
Listed hose fit
Up to 15 ft; 3 in diameter
Watch for: Check section placement and hose support requirements. Do not assume every uneven site can achieve the required fall.
Published details from the named brands; confirm the exact variant before ordering.
Pick
Choose it for
Check first
Camco Sidewinder 43031
Short folding run
Confirm the installed route, support orientation and current instructions. A hose and inlet adapter are separate equipment.
Valterra Slunky S1500
Longer folding support
Actual ground and inlet geometry control. Confirm the selected black S1500 package and included straps.
Camco Rhino 43072
Separate nesting sections
Check section placement and hose support requirements. Do not assume every uneven site can achieve the required fall.
Check the hose path after placing supports
A support's maximum length does not establish its reach around every bend. Check the connected hose along the route you intend to use, including the inlet fitting.
Look at the whole elevation profile rather than only the two ends. The selected products support a hose; they are not pumps or permission to connect to an unsuitable inlet.
Choose a folding run or separate sections
Sidewinder and Slunky fold into linked packages; Rhino uses individual sections that nest. Compare the actual setup and storage process rather than treating the same hose-length figure as the same support design.
Use the exact instructions for cleaning and storage, and keep sewer equipment separate from drinking-water gear. No leak-free, blockage-free or complete-drainage result is promised.
Questions
Is Rhino fifteen feet of solid track?
It supplies five sections and is listed for a hose up to 15 ft. Section placement still has to meet the hose’s support requirements.
Will Slunky guarantee the right fall?
Its maker gives 7-inch and 4.5-inch end heights. The site's inlet and ground geometry still need checking.
Listing details and availability can change. Our recommendations are built from the makers' published specs and manuals. All three checked New offers were sold by Amazon.com. Recheck the selected variant, seller and stock status before ordering.