Plain Buy Guides

As an Amazon Associate I earn from qualifying purchases. Our product guides include affiliate links to Amazon.

Tin snips buying guide

Choose tin snips by the cut direction and metal

For straight cuts and slight curves in low-carbon rolled steel, compare Crescent Wiss M3R. For offset snips, choose Malco AV6 for left cuts or AV7 for right cuts; both also make straight cuts. Match the exact metal and thickness to the model’s capacity before buying for flashing or other sheet-metal work.

Prepared October 18, 2026 from maker product pages, catalogs, warranty documents and exact Amazon listings. These picks are built from the makers' published specs and manuals.

Choose tin snips for the direction of your cut

Cut direction and material capacity are separate checks. A yellow-handled combination snip and a red- or green-handled offset solve different buying needs; neither handle color nor an 18-gauge label alone specifies every metal it can cut.

Three exact models from two makers. These are published specifications, not a cutting-performance ranking.
Your jobModelUseful differenceCheck or skip
Straight cuts and slight curvesCrescent Wiss M3R9.75-inch tool; yellow handles; maker rates low-carbon rolled steel up to 18 gauge.The maker brochure calls M3R left-cut; the current product page says straight and slight left/right curves. Confirm the supplied tool.
Left-turning cuts with offset jawsMalco AV6Red grip; left cuts, straight lines and tight circles; 1-1/4-inch catalog length of cut.Choose by left-cut geometry rather than assuming left means a left-handed handle. Check the metal-specific capacity.
Right-turning cuts with offset jawsMalco AV7Green grip; right cuts, straight lines and tight circles; 1-1/4-inch catalog length of cut.Skip this direction when your pattern requires AV6’s left-cut geometry. Both are separate tools, not a pair in one listing.

Check the metal as well as the gauge

Exact models and buying options

Crescent Wiss - M3R

Choose M3R when your main need is the maker’s straight-cut and slight-curve format. Crescent lists yellow handles, a spring return, a single-handed latch for either hand and serrated blades, with a 9.75-inch overall length and an 18-gauge low-carbon rolled-steel capacity. These features do not establish a measured cutting-force or service-life advantage.

Document conflict: the maker’s Next Generation brochure labels its M3R row Aviation Snip, Left Cut, while the current M3R product page describes straight and slight left/right curves. The brochure lists 1.05 pounds as product weight; the current page lists 1.00 pound as catalog weight. Confirm the supplied model and weight if either decides the purchase.

Warranty: Crescent's product page says Full Lifetime, for the original buyer from an authorized US seller; see the warranty summary below.

Check Crescent Wiss M3R on Amazon

Editor: Isaac Daniels

Malco - AV6

Choose AV6 for its left-cut offset layout when the pattern includes sharp left angles, straight lines or tight circles. Malco identifies it with a red grip, forged steel jaws and a self-opening latch. The catalog’s AV6 row specifies a 1-1/4-inch length of cut and 9-5/8-inch overall tool length.

Malco publishes separate capacities for stainless, galvanized and mild steel, aluminum and copper. Check those limits above against the actual flashing or sheet you intend to cut. The listing is one AV6, not a matched red-and-green pair. How its grip feels, how cleanly it finishes an edge and how long it lasts are drawn from the makers' published documents.

Warranty: Malco lists a limited lifetime warranty for the original buyer; normal wear and misuse are excluded.

Check Malco AV6 left-cut offset snips on Amazon

Malco - AV7

Choose AV7 when you need the right-cut counterpart to AV6. Malco specifies a green grip and an offset style for sharp right angles, straight lines and tight circles. Its catalog row gives the same 1-1/4-inch cutting length and 9-5/8-inch overall tool length as the left-cut AV6.

AV7’s current maker table lists the same material-specific limits shown above for AV6, including 20-gauge stainless and 18-gauge galvanized or mild steel. That does not make the two cutting directions interchangeable for your pattern. The checked listing supplies AV7 separately, so order AV6 separately only if your work calls for both directions.

Warranty: Same Malco limited lifetime warranty as the AV6.

Check Malco AV7 right-cut offset snips on Amazon

Warranty

Crescent covers the Wiss M3R's manufacturing defects for the lifetime of the original buyer on purchases from authorized US sellers. Keep your proof of purchase, since Crescent asks where you bought the tool. It excludes normal wear, misuse, accidents and modification, and you pay shipping both ways for a repair.

Malco gives the AV6 and AV7 a nontransferable limited lifetime warranty for the original buyer against material and workmanship defects under proper use, with repair or replacement at its choice. It excludes misuse, neglect, improper storage and normal wear. Contact Malco customer service before sending a snip back; Malco prepays freight on warranty replacements.

Common buying questions

Can a straight-cut M3R also follow curves?

The current Crescent page says M3R makes straight and slight left/right curves. Its brochure labels the row left-cut, so confirm the supplied model. AV6 and AV7 are the dedicated offset directions compared here.

Does an 18-gauge rating cover stainless steel?

Use the exact maker’s material table. AV6 and AV7 list 20-gauge stainless and 18-gauge galvanized or mild steel. M3R’s cited rating is 18-gauge low-carbon rolled steel.

Do the Malco links include both left and right snips?

No. AV6 and AV7 are separate single-tool listings. AV6 has the red grip and left-cut geometry; AV7 has the green grip and right-cut geometry.

Does a lifetime warranty cover worn cutting edges?

The Crescent and Malco policies exclude normal wear. Each also has other conditions, including proper use; Crescent restricts coverage to the original US purchaser buying from an authorized seller.

Sources and buying checks

Sources and New Amazon.com offers were checked October 18, 2026. The linked ASINs identify M3R, AV6 and AV7; sellers and selected variants can change. We compared documents.

Check the model, cutting direction, metal-specific limit and seller before ordering. Use the maker’s current warnings and instructions; no roof installation method or safety outcome is established by this comparison.