Plain Buy Guides

As an Amazon Associate I earn from qualifying purchases. Our product guides include affiliate links to Amazon.

Tire tread depth gauges: range and readability

Choose a GODESON pen for a simple 32nds scale, JACO TreadPro for a dial that holds its reading, or GODESON digital for selectable units. Match the range to the tire, and measure multiple locations. A colored band or a single depth reading does not establish the tire’s overall condition.

Checked October 14, 2026 against the named brand Amazon listings and primary sources below. We compared published specs and fit limits; picks are built from the makers' published specs and manuals.

Quick picks

  1. Pocket pen formatGODESON 88702 Two-Piece SetFor a mechanical scale in 1/32-inch increments.Check on Amazon
  2. Dial with reading holdJACO TreadProFor reading the measurement after lifting the gauge away.Check on Amazon
  3. Selectable digital unitsGODESON Digital DTG02-2For a display offering fractional inches, decimal inches and millimeters.Check on Amazon

Check the fit before buying

Tire depth
Choose a range that covers the actual tread.
Units
Match 32nds or millimeters to the tire guidance you use.
Measurement
Follow the gauge instructions; check several tread locations.
Tire condition
Inspect wear bars and damage as well as depth.

Use tire-specific guidance and professional inspection when condition or uneven wear is uncertain.

The picks, and why

Pocket pen format: GODESON 88702 Two-Piece Set

The brand listing identifies a two-piece set with a pocket clip and a 0–1 inch scale marked in 32nds. Confirm the two-piece selection rather than treating Pack of 1 as one gauge.

Its red, yellow and green bands are product scale markings. They are not a substitute for the tire maker's replacement guidance, inspection or applicable local requirements. Read the number and record the location on the tire.

Listed range
0–1 in
Scale
1/32 in; two gauges

Watch for: Color bands do not establish legal compliance or safe tire condition. The checked New offer came from a third-party seller rather than Amazon.com.

Check GODESON 88702 Two-Piece Set on Amazon

Editor: Isaac Daniels

Dial with reading hold: JACO TreadPro

JACO specifies a maximum depth of 14/32 inch and small scale ticks representing 1/128 inch. It retains the reading and includes a pouch. That fine tick spacing is resolution, not an accuracy rating.

The maker excludes ATV/UTV tires and very deep, aggressive mud treads. Check the starting tread depth against the range instead of assuming a dial can measure every tire.

Maximum depth
14/32 in
Small ticks
1/128 in resolution

Watch for: Not for the excluded deep-tread applications. Follow the gauge’s own setting and reading procedure. The checked New offer came from a third-party seller rather than Amazon.com.

Check JACO TreadPro on Amazon

Selectable digital units: GODESON Digital DTG02-2

The exact listing offers three unit modes, a zero-reset control and a 0–25 mm or 0–1 inch stated range. Those upper limits are rounded differently; confirm the actual unit's scale if working near its limit.

The listing gives a fine decimal figure without a clear accuracy basis and an incomplete SR44/LR battery designation. Neither is repeated here as an accuracy or battery specification. Check the delivered instructions for both.

Units
Fractional in, decimal in, mm
Controls
Zero reset; listed five-minute auto-off

Watch for: Confirm battery designation and zeroing procedure. Display digits do not prove accuracy. The checked New offer came from a third-party seller rather than Amazon.com.

Check GODESON Digital DTG02-2 on Amazon

Side by side

Published details from the named brands; confirm the exact variant before ordering.
PickChoose it forCheck first
GODESON 88702 Two-Piece SetPocket pen formatColor bands do not establish legal compliance or safe tire condition. The checked New offer came from a third-party seller rather than Amazon.com.
JACO TreadProDial with reading holdNot for the excluded deep-tread applications. Follow the gauge’s own setting and reading procedure. The checked New offer came from a third-party seller rather than Amazon.com.
GODESON Digital DTG02-2Selectable digital unitsConfirm battery designation and zeroing procedure. Display digits do not prove accuracy. The checked New offer came from a third-party seller rather than Amazon.com.

Read several places and record the units

Michelin advises checking several points across the tire's width because wear can differ. Follow the gauge instructions for its base, probe and zero setting; avoid confusing a raised wear indicator with the groove you intend to measure.

Record each reading with its units and position. A pen marked in 32nds, a fine-tick dial and a digital millimeter display should not be compared as if their printed numbers used the same unit.

Use depth as one part of tire inspection

Michelin identifies tread worn flush with wear bars as a replacement cue. Its inspection guidance also explains that outside appearance cannot rule out internal damage. This guide does not turn a gauge's green zone into a whole-tire clearance.

Get a tire professional's assessment for unusual wear or damage. No specific gauge purchase establishes a diagnosis, a tire lifespan or compliance with every jurisdiction's rules.

Questions

Is a digital gauge automatically more accurate?

The display format does not establish accuracy. Compare a supported specification and the actual reading procedure.

Will JACO cover deep off-road tread?

Its published maximum is 14/32 inch and its maker excludes ATV/UTV and very aggressive mud tires. Check your actual tread depth.

Sources

Listing details and availability can change. Our recommendations are built from the makers' published specs and manuals. Checked offers included sellers other than Amazon.com. Recheck the selected variant, seller and stock status before ordering.