As an Amazon Associate I earn from qualifying purchases. Our product guides include affiliate links to Amazon.
USB-C hub buying guide
Choose a USB-C Hub by the Ports You Actually Need
Choose the Anker 332 A8355 for one HDMI display and USB accessories, the Anker 341 A8346 when you also need SD and microSD slots, or the Anker 555 A8383 for Ethernet, 10Gbps USB data and a compatible 4K/60Hz display. Match the laptop’s USB-C capabilities before counting sockets. Each hub has one HDMI output and a separate USB-C power-input port.
Prepared October 15, 2026 from exact Anker US product pages, named model support specifications, original and updated guides, the full US warranty policy and checked Amazon offers. Published capabilities are compared.
Start with the connections missing from your laptop
These are compact hubs with an attached USB-C host cable and no supplied wall power adapter. Their one HDMI output, USB data connections and optional PD pass-through differ from a larger docking-station setup.
Model-specific published ceilings. A compatible laptop, display, cable and peripheral are still required.
Your job
Model
Useful difference
Check or skip
One display and USB devices, without card or Ethernet sockets
10/100/1000Mbps Ethernet; HDMI up to 4K/60Hz with a DP 1.4 host; three USB data ports up to 10Gbps; SD and microSD.
DP 1.2 limits 4K to 30Hz. Card readers are UHS-I, not 10Gbps readers. OS and weight figures differ across documents.
Check video, power, storage and the host connection separately
The host must provide the video signal: All three models require DisplayPort Alt Mode from the laptop’s USB-C port for HDMI. A8355 and A8346 specify up to 4K/30Hz. A8383’s current guide distinguishes DP 1.2 at 4K/30Hz from DP 1.4 at 4K/60Hz; DP here describes the laptop’s video signal capability, not a separate physical DisplayPort socket.
One HDMI output per hub: Each pick has one HDMI connector. The USB-C data sockets do not output video, and the PD-IN sockets are power inputs. Do not choose one expecting a USB-C monitor connection from the hub or two independent displays from its single HDMI socket. Check the laptop’s own external-display limits.
Charger and cable allowance: The current guides specify a 100W PD charger and suitable USB-C cable for up to 85W laptop pass-through. A8355’s FAQ says a 140W charger still cannot raise its 100W input ceiling. If your laptop requires the full 100W or more from its adapter, keep that requirement separate from this hub’s lower laptop-output maximum.
USB data speed is not card-reader speed: A8355’s data ports specify up to 5Gbps. A8383’s USB-C and two USB-A data ports specify up to 10Gbps, but its SD and microSD readers are UHS-I. The current A8346 and A8383 guides list card-reader ceilings of 104MB/s and capacity up to 2TB. These are published maxima.
Peripheral power is a separate limit: A8355’s maker page lists 4.5W total across its two USB-A ports and 7.5W at its USB-C data port; its guide labels that USB-C port as data-only with no charging or video. These fields do not establish a phone fast-charging mode. A8346 and A8383’s current guides also label their USB-C data ports data-only and exclude Samsung PPS support. Choose these for their listed laptop and data functions, and confirm the power needs of attached devices.
Cable reach and operating system: The host cables are attached to the hubs. The current A8346 guide specifies 21cm; the checked A8383 listing specifies 7.48 inches. Check reach in your laptop-stand setup without assuming an extension will preserve every function. Confirm the exact operating system: A8355 and A8383’s listings set different Mac minimums from their maker guides, and both listings exclude Linux.
Exact models and buying options
Anker 332 five-in-one — A8355 / A8355011
Choose the 332 when you need one HDMI display and a few USB data connections, without card readers or wired Ethernet. Anker’s US page prints SKU A8355011 and barcode 194644121358, both present on the checked listing. It supplies two USB-A 5Gbps data ports, one USB-C 5Gbps data port, a USB-C PD-IN port and one HDMI output.
The current maker guide specifies HDMI up to 4K/30Hz, and its FAQ also lists 1080p/60Hz. HDMI requires DisplayPort Alt Mode from the host laptop. The USB-C data port cannot drive a display, and the PD-IN port is for power input from a separate charger. The checked package contains the hub with attached host cable and welcome guide, with no wall charger.
For laptop charging, Anker specifies up to 85W from a 100W PD input. Its FAQ explicitly says connecting a 140W adapter does not increase that input ceiling. The maker also directs Samsung T7 SSD connections to the USB-A ports for stable data transfer; that is a model-specific compatibility note, not a measured SSD-speed result.
Reason to skip: Skip for Ethernet, SD or microSD cards, 10Gbps USB data, a USB-C display output or 4K/60Hz from this hub. Those connections and capabilities are absent from this five-port design.
Power and tablet wording: The maker’s guide says its USB-C data port does not support charging, while its product table lists 7.5W at that port and 4.5W total across USB-A. Its FAQ describes PD-IN as laptop-only charging, while the listing mentions a 45W adapter for iPad use. Confirm a specific tablet or powered-peripheral setup with Anker rather than treating these statements as a general phone or tablet charging guarantee.
Operating-system difference: The maker guide lists Windows 10/11 and macOS 10.14 or later. The checked listing instead names macOS 12 or later, adds ChromeOS and says Linux is incompatible. Confirm an older Mac or other exact OS before buying. The US warranty is 18 months, subject to the full terms below.
Choose the 341 when SD and microSD card access is the extra connection you need alongside one HDMI display and USB accessories. The US maker page prints A83460A2 and barcode 194644020385, matching the checked listing’s part number and one of its full UPCs. There is one HDMI output up to 4K/30Hz, two USB-A data ports, a USB-C data port and a separate USB-C PD-IN socket.
The current model-specific support guide specifies a 21cm attached host cable, up to 5Gbps on the USB data ports, and up to 104MB/s with cards up to 2TB in its SD/microSD slots. The cards do not turn this into a 10Gbps storage hub. There is no Ethernet socket. A wall charger and its cable are not supplied for PD pass-through.
Read the document differences before relying on its ceilings. The current guide and maker FAQ state 85W to the laptop with a 100W PD charger and cable, reserving 15W for the hub. The older manual still linked on the product page instead allocates 77W to the laptop and 23W to the hub. The product page’s USB-C data table says 480Mbps, while its description and current support guide say 5Gbps. Confirm the exact unit and documentation if either figure determines your choice.
Reason to skip: Skip for Ethernet or a 4K/60Hz display. If you need an assured specific USB-C data speed or laptop power allocation, obtain confirmation for the exact unit before choosing it; the maker documents disagree.
Package contents to confirm: The US selection identifies the hub with its attached host cable but does not enumerate a full accessory list. Anker’s New Zealand page lists a travel pouch and welcome guide under the same barcode, with SKU A83460A3 rather than the US A83460A2. Confirm those pack-ins with the US seller; their inclusion is not assumed from the overseas package. A wall charger and its USB-C cable are separate purchases.
Size, weight and older instructions: The older A8346 manual lists 330 × 55 × 16mm and 140g; the checked listing gives 3.52 ounces. These are not one consistent sizing or weight reference, and this guide does not assume what the old length includes. That manual specifies a 40°C maximum operating temperature. Follow the directions for the exact unit.
Older peripheral-power limits: The older A8346 manual limits connected USB devices to 900mA combined input current without a charger, or 3.3A when charger-powered. The current guide does not repeat that combined limit. Confirm the exact unit’s peripheral-power allowance if your attached devices depend on it.
OS and warranty: Anker’s current guide lists Mac OS X 10.2 or later and Linux; its US product page instead lists Mac OS X 10.6 or later and Linux 2.6.14 or later. Confirm the exact OS and needed functions. The checked offer and older manual specify an 18-month limited warranty.
Choose the 555 when you need wired Ethernet or the higher published USB data and HDMI refresh ceilings. Anker’s US page prints barcode 194644032999, matching the checked listing. It has two USB-A data ports and one USB-C data port up to 10Gbps, HDMI, 10/100/1000Mbps Ethernet, SD, microSD and a separate PD-IN power socket. The selected package includes the hub with attached cable and a welcome guide, not a wall charger.
The current English support guide makes the display condition explicit: 4K/60Hz requires DP 1.4 from the laptop; DP 1.2 is limited to 4K/30Hz. Its USB-C data port does not output video. The card readers remain UHS-I, with the current guide listing up to 104MB/s and 2TB card capacity. A 10Gbps USB-port headline does not make its card reader a 10Gbps reader.
The current guide specifies up to 85W laptop pass-through with a suitable 100W PD charger and cable, reserving 15W for the hub. It calls the hub plug-and-play, but its Ethernet troubleshooting section separately names driver resources for Windows and Intel-based Mac computers and OS updates for M-series Macs. Check the exact OS and network-support requirements instead of treating that general label as an assurance that every Ethernet setup needs no software.
Reason to skip: Skip for two display outputs, USB-C video from the hub, more than 85W laptop pass-through or 4K/60Hz on a DP 1.2-only host. Ethernet’s 1Gbps port rating does not establish the speed of your internet connection.
Revision, weight and OS differences: The maker page’s selected SKU is A83830A2; the listing’s is A83830A1, with the same full barcode. Confirm the unit revision. The older A8383 V02 manual lists 109g / 3.8 ounces; the current page says 4.4 ounces in its description and 4.5 ounces in its specs, while the listing says 4.5 ounces. The guide lists Mac OS X 10.2 or later, but the listing says macOS 12 or later and excludes Linux. No explanation for those differences is assumed.
Environment and warranty: The older named manual specifies moderate climates and a maximum 40°C ambient temperature. Follow the complete model instructions. The checked package and manual specify an 18-month limited warranty, with the US conditions below.
18-month US warranty and separate Amazon return conditions
The three checked New hub offers specify 18-month limited warranties, consistent with the Hubs and Adapters category in Anker’s current US policy. The policy covers the original purchaser against defects in materials and workmanship under normal use, starting on the purchase date. Exact model terms and the invoice determine the duration. Coverage applies only in the original country of purchase and becomes void when the item is taken outside that country or an authorized online order is shipped internationally. Statutory rights remain unaffected.
Contact Anker for a claim and retain adequate proof of purchase, the serial number or clear defect evidence, and the documented troubleshooting outcome it requests. Accepted proof includes an invoice naming the seller and product, or a dated authorized-reseller receipt. Anker may require return for inspection. If a requested defective unit is not returned, or the wrong item is returned, the replacement warranty becomes void. The policy requires defect-claim materials within 90 days of opening the claim and describes the original warranty period or that claim window, whichever is longer.
Anker may provide an equal-value factory-refurbished replacement, then a new unit if no refurbished model is available. A replacement can differ in appearance or features and have a lower market value as technology changes; Anker chooses the comparable model. If replacement is unavailable or not preferred, its stated remedy is a partial refund based on the period of use. Replacement coverage lasts for the remaining original period or three months from replacement, whichever is longer.
Exclusions include normal aging and wear, missing purchase proof, lost or stolen items, expired coverage, non-quality issues raised outside the return period, promotional giveaways, unauthorized sellers, third-party repairs or modifications, external damage, misuse, drops, liquid damage and unsuitable temperatures. Damage from unauthorized disassembly or non-approved parts is excluded. The standard warranty is not an accidental-damage plan; optional paid extensions and purchase insurance have separate terms.
Anker disclaims responsibility for data loss, accidental returns of unrelated belongings, unauthorized-return costs and losses from misuse; any stated compensation is capped at the original purchase amount. If it supplies a prepaid label and its return instructions are followed, its policy covers loss or damage in that return transit. Altered labels, incorrect items or empty packages are excluded. Confirm the authorized return arrangement before shipping.
All three checked New offers were sold by AnkerDirect and fulfilled by Amazon. Anker’s US site and the original US manual identify Fantasia Trading LLC, matching the seller’s detailed business information. The listing displayed a 30-day refund/replacement offer when checked. Amazon purchases follow the applicable Amazon return policy and order-specific conditions; confirm the seller, condition, selected bundle, deadline and return costs before ordering. Used and refurbished offers are separate choices and were not the basis of these picks.
Anker’s separate direct-site 30-day return policy requires an undamaged product, original packaging and all original accessories, followed by warehouse inspection. Visible use or damage can prevent a return. For non-quality returns, the buyer pays return shipping and bears transit loss or damage; only the product cost is refunded. Bundled gifts and qualifying promotional items must also be returned or deductions can apply. Bulk/corporate orders and some campaigns are excluded; preorder timing starts on shipping. These direct-store conditions are not a promise of the terms on an Amazon order.
Common buying questions
What is a USB-C hub in this comparison?
These hubs expand a compatible laptop’s USB-C connection into USB data sockets, one HDMI output and a separate PD power-input socket. The 341 adds SD/microSD readers; the 555 adds those readers and Ethernet. The host still needs the required video and charging capabilities.
Can I connect a USB-C monitor to the hub’s USB-C data port?
The named maker guides say those USB-C data ports do not support video output. Each hub’s display connection is its single HDMI socket, with the host providing DisplayPort Alt Mode.
Does a 100W or 140W charger provide 100W through the hub?
The current model documents specify a 100W input ceiling and up to 85W to the laptop, reserving 15W for the hub. A8355’s FAQ explicitly says a 140W adapter does not raise that limit. A8346’s older linked manual instead says 77W, so confirm that model’s exact unit and guide.
Which model supports 4K at 60Hz?
The A8383 guide specifies up to 4K/60Hz with a DP 1.4-capable laptop, or 4K/30Hz with DP 1.2. The A8355 and A8346 specify up to 4K/30Hz. The monitor and HDMI connection must also support the required mode.
Are the SD card readers as fast as the 10Gbps USB ports?
A8383’s USB data ports are rated up to 10Gbps, but its card readers are UHS-I. The current A8346 and A8383 guides list card-reader maxima of 104MB/s and capacity up to 2TB. Those figures do not establish measured copy speed for every card.
Is a wall charger included?
These selected hub packages do not include a wall charger or its USB-C power cable. The host cable is attached to the hub. For the current 85W laptop pass-through ceiling, the maker documents specify a suitable 100W PD charger and cable.
Sources and buying checks
Full maker barcodes tie the checked listings to the exact US product pages. Separate named model support specifications, FAQs and original guides supply each model’s own limits. Older manual editions and current document differences are called out rather than silently treated as identical.
Anker 332 A8355 — SKU A8355011 / barcode 194644121358: US exact model product page (anker.com), Named A8355 support specifications and user-guide links (service.anker.com), Model-specific maker FAQ: display, power and host requirements (service.anker.com), Current support-linked English guide PDF (salesforce-knowledge-download.s3.us-west-2.amazonaws.com).
Anker 341 A8346 — SKU A83460A2 / barcode 194644020385: US product page, including conflicting USB-C data fields (anker.com), Named A8346 maker support specifications and guide links (service.anker.com), Current five-page support guide PDF (salesforce-knowledge-download.s3.us-west-2.amazonaws.com), Older product-page-linked A8346 manual with different power and size figures (d2211byn0pk9fi.cloudfront.net), New Zealand package list: same barcode, different SKU; not a US pack-in promise (anker.com).
Anker 555 A8383 — barcode 194644032999: US product page and weight figures (anker.com), Named A8383 maker support specifications and guide links (service.anker.com), Current English eight-page guide: DP versions, cards, power and Ethernet notes (salesforce-knowledge-download.s3.us-west-2.amazonaws.com), Older named A8383 V02 manual, with different weight (d2211byn0pk9fi.cloudfront.net).
Anker US warranty and sales channel: Full current US warranty and direct-store return conditions (anker.com), Anker’s page naming its AnkerDirect storefront channel (anker.com).
Confirm the selected hub revision, host USB-C capabilities, OS, card and peripheral requirements before buying. Follow the full model instructions for operating conditions and troubleshooting. An output ceiling or compatibility list does not establish measured stability, transfer time or support for every laptop configuration.