As an Amazon Associate I earn from qualifying purchases. Our product guides include affiliate links to Amazon.
USB-C laptop charger buying guide
Choose a USB-C Laptop Charger by Its Port and Power Split
Start with the USB-C charging input specified for your exact laptop. Choose the Anker 715 A2663 for one device at up to 65W, the Anker Prime A2688 for a 100W single-device ceiling and three ports, or the Anker A2697/B2697 bundle for a compatible 140W input and four ports. Adding devices changes the available power; the largest number on the adapter is not a charging-speed promise.
Prepared October 15, 2026 from current Anker US product and support pages, original model-specific manuals, USB-IF cable guidance, the full US warranty policy and Amazon offers. This comparison uses published specifications.
Choose for one laptop or a shared charging setup
These are three distinct wall adapters with US plugs. A laptop’s USB-C port must support the required charging input; a connector that fits is only the first check.
Published maximum outputs. Full-rate charging also depends on the laptop and cable.
Three USB-C ports and one USB-A; C1 or C2 alone offers up to 28V × 5A = 140W. Five-foot 240W cable supplied.
C1 + C2: 70W + 70W; four ports: 134W total. Maker weight figures disagree and output can reduce during extended high-temperature use.
Match the laptop, cable and simultaneous-use mode
Exact laptop input: Check the laptop maker’s required USB-C input profile and which port accepts charging. A USB-C data port or a barrel/Slim Tip power socket is not proof of USB-C power input. Keep any required proprietary adapter in the comparison, particularly for gaming and workstation loads.
Cable capability: A2663’s 65W profile uses 20V at 3.25A; A2688’s 100W profile uses 20V at 5A. Choose a cable rated for that voltage and current. A cable limited to 60W does not establish either full output. For the 140W mode, the laptop and cable must support the 28V, 5A PD 3.1 arrangement. The selected 140W bundle supplies a 240W cable.
Power and data are different ratings: USB-IF’s current certification guidance uses 60W or 240W power markings on USB-C-to-USB-C cables, with separate data-rate markings where required. Anker also refers to 100W E-marker cables in its product notes. Read the cable’s actual capability; a power number alone does not establish a high-speed data or display connection. This guide does not certify the supplied cable.
Two-port allocation: A2688: C1 + C2 is 65W + 35W; C1 + USB-A is 65W + 22.5W; C2 + USB-A shares 12W + 12W. The upper C1 port is the relevant laptop port in those shared modes. A2697: C1 + C2 is 70W + 70W; either C1 or C2 with C3 is 100W + 40W; either with USB-A is 100W + 33W. C3 + USB-A shares 24W total.
Three or four connected devices: A2688’s named quick-start guide gives an 89W three-port total. A2697 gives 65W + 45W + 30W for C1 + C2 + C3 or C1 + C2 + USB-A. With C1 or C2 plus both C3 and USB-A, it specifies 100W plus a shared 24W. With all four ports, C1 and C2 receive 65W and 45W, while C3 and USB-A share 24W: 134W total.
Plug, environment and warranty region: These US versions specify 100–240V input at 50–60Hz and folding US plugs. That does not provide every destination’s plug shape. The manuals specify indoor use; follow the complete model instructions. Anker’s US warranty is country-specific and says coverage becomes void if the item is taken outside the country of purchase. Check those terms before choosing one for international travel.
Exact models and buying options
Anker 715 / Nano II 65W — A2663
Choose the A2663 when your laptop accepts an input within its one-port 65W capability and you want no shared-port allocation to manage. Anker’s US product page prints A2663 and full barcode 194644065263, also present on the checked Amazon listing. The named US manual specifies 5V/3A, 9V/3A, 15V/3A and 20V/3.25A fixed outputs, with 65W as the maximum.
The US maker page lists a folding plug, approximate dimensions of 1.65 × 1.42 × 1.74 inches and a weight of 3.96 ounces. There is one USB-C port and no USB-A port. A separate appropriate USB-C-to-USB-C cable is needed for a laptop; the maker explicitly says cables are sold separately.
Its single-port layout gives one laptop the published power ceiling without dividing it among connected devices. It does not establish that every USB-C laptop accepts 65W, that a laptop needing more will run at full performance, or that its phone compatibility list establishes a particular laptop’s requirements.
Reason to skip: Skip for a laptop requiring more than this 20V/3.25A output, or when you need to connect a phone and laptop at once. There is only one output.
Package disagreement: Amazon’s structured package field says Cable, but the model’s maker description and the listing’s own detailed notes say cables are sold separately. Plan on an adapter-only purchase and confirm the selected package before ordering.
Electrical field disagreement: Amazon’s unqualified Amperage field says 16A. The original US manual instead specifies 2.1A AC input and a maximum 3.25A at its 20V DC output. Use the named maker input and output profiles, rather than that generic field.
Warranty: The US manual and checked listing specify an 18-month limited warranty. Its conditions and the seller-specific return distinction are below.
Choose A2688 for a laptop that accepts up to 20V/5A through USB-C and for the option of shared charging at the listed lower allocations. Anker’s US page prints A2688 and barcode 194644040635, matching the listing’s model and full UPC. There are two USB-C ports and one USB-A port; either USB-C port offers up to 100W when used alone.
With both USB-C ports connected, Anker specifies 65W at upper C1 and 35W at C2. C1 with USB-A is 65W + 22.5W; C2 with USB-A is only 12W + 12W. This last pairing is a material limitation for a laptop. The named quick-start guide lists 89W total with all three ports in use, so the adapter’s 100W headline is not a three-device allocation.
The maker lists approximately 1.7 × 1.1 × 2.7 inches, excluding the prongs, and 170g. The checked package supplies the charger and welcome guide; charging cables are not included. Anker calls for an E-marker cable for optimal 100W charging and flags compatibility problems with Apple’s 5.9-foot Thunderbolt cable on some Samsung, Dell and Lenovo models. That note is cable-specific, not a claim that every cable or every laptop in those brands fails.
Reason to skip: Skip if you need 100W for the laptop while another device is connected to this adapter. Its shared allocations reduce laptop power; a second USB-C port does not add another 100W supply.
Listing field disagreement: Amazon’s model field and full UPC match Anker’s A2688, but its separate manufacturer-part field says B25M1121. Check A2688 and barcode 194644040635 on the selected product; do not use that conflicting part field to identify a different charger.
Warranty: The checked A2688 listing specifies 24 months, consistent with the current US policy’s Prime-charger category. This is separate from any optional paid plan.
Choose this model when the laptop accepts its 28V/5A PD 3.1 mode and you want a supplied cable and a display for published port information. The US product page labels the cable bundle B2697, links the A2697 quick-start guide and prints barcode 194644212087. The listing contains A2697, B2697 and that full barcode. The selected package includes one adapter, one five-foot 240W USB-C-to-USB-C cable and a user guide.
C1 and C2 each specify up to 140W alone; C3 reaches up to 40W and USB-A up to 33W. The first two USB-C ports together allocate 70W + 70W. For a compatible laptop requiring 100W with another device, the published C1-or-C2 plus C3 arrangement is 100W + 40W. With all four outputs connected, the ceiling is 134W total, allocated as 65W + 45W plus a shared 24W for C3 and USB-A.
The display reports power, port status and temperature; it does not by itself verify output or guarantee protection. Anker warns that output can reduce during extended high-temperature operation. Its C1/C2 fixed-output tables begin at 9V, while C3 includes 5V; check a small device’s required input rather than assuming all ports have the same profiles. Anker also warns that proprietary Dell charging protocols can limit full-speed charging on XPS 15 9500/9510, Alienware X14 and Precision 5570.
Reason to skip: Skip when you need a guaranteed continuous 140W output, full proprietary laptop-adapter performance, or more than the allocated laptop power with other ports occupied. The published ceiling and screen do not establish those outcomes.
Weight disagreement: Anker’s same US page says 9.7 ounces in its description but 13.93 ounces / 395g in its specification table. Amazon lists 10.24 ounces and separately describes 275g with 395g total. These do not provide one consistent adapter-weight figure. Confirm the exact unit weight if carrying weight is decisive; no explanation for the disagreement is assumed.
Electrical field disagreements: Amazon’s generic fields say 2 volts input and 16A. The original A2697 guide instead specifies 100–240V AC input at 2.6A maximum, and up to 5A in the relevant C1/C2 output profiles. Confirm the model label and maker specifications; those listing fields do not establish its electrical requirements.
Warranty: The checked cable bundle lists an 18-month warranty; the current US policy gives 18 months for chargers outside its named 24-month categories.
US warranty conditions and the separate Amazon return policy
For the checked New offers, A2663 and A2697 specify 18-month limited warranties; A2688 specifies 24 months. Anker’s current US policy covers the original purchaser against defects in materials and workmanship under normal use, starting on the purchase date. Exact model terms and the invoice determine the duration. Its warranty is valid only in the original country of purchase and says it becomes void when the item is taken outside that country or an authorized online order is shipped internationally. Statutory rights remain unaffected.
Contact Anker for a claim and retain adequate proof of purchase, the serial number or clear defect evidence, and the documented troubleshooting outcome it requests. Accepted proof includes an invoice naming the seller and product, or a dated authorized-reseller receipt. Anker may require return for inspection. If a requested defective unit is not returned, or the wrong item is returned, the replacement warranty becomes void. The policy requires defect-claim materials within 90 days of opening the claim and describes the original warranty period or that claim window, whichever is longer.
Anker may provide an equal-value factory-refurbished replacement, then a new unit if no refurbished model is available. A replacement can differ in appearance or features and have a lower market value as technology changes; Anker chooses the comparable model. If replacement is unavailable or not preferred, its stated remedy is a partial refund based on the period of use. Replacement coverage lasts for the remaining original period or three months from replacement, whichever is longer.
Exclusions include normal aging and wear, missing purchase proof, lost or stolen items, expired coverage, non-quality issues raised outside the return period, promotional giveaways, unauthorized sellers, third-party repairs or modifications, external damage, misuse, drops, liquid damage and unsuitable temperatures. Damage from unauthorized disassembly or non-approved parts is excluded. The standard warranty is not an accidental-damage plan; optional paid extensions and purchase insurance have separate terms.
Anker disclaims responsibility for data loss, accidental returns of unrelated belongings, unauthorized-return costs and losses from misuse; any stated compensation is capped at the original purchase amount. If it supplies a prepaid label and its return instructions are followed, its policy covers loss or damage in that return transit. Altered labels, incorrect items or empty packages are excluded. Confirm the authorized return arrangement before shipping.
All three checked New offers were sold by AnkerDirect and fulfilled by Amazon. Anker’s US site and the original US manual identify Fantasia Trading LLC, matching the seller’s detailed business information. The listing displayed a 30-day refund/replacement offer when checked. Amazon purchases follow the applicable Amazon return policy and order-specific conditions; confirm the seller, condition, selected bundle, deadline and return costs before ordering. Used and refurbished offers are separate choices and were not the basis of these picks.
Anker’s separate direct-site 30-day return policy requires an undamaged product, original packaging and all original accessories, followed by warehouse inspection. Visible use or damage can prevent a return. For non-quality returns, the buyer pays return shipping and bears transit loss or damage; only the product cost is refunded. Bundled gifts and qualifying promotional items must also be returned or deductions can apply. Bulk/corporate orders and some campaigns are excluded; preorder timing starts on shipping. These direct-store conditions are not a promise of the terms on an Amazon order.
Common buying questions
Can I charge any laptop with a USB-C charger?
Check the exact laptop’s supported charging input, required power profile and charging-capable port. A USB-C connector alone does not establish compatibility, and proprietary higher-power inputs may require the laptop maker’s adapter.
Does a 100W adapter give a laptop 100W with a phone connected?
A2688 specifies 65W + 35W with both USB-C ports used, or 65W + 22.5W with upper C1 and USB-A. Its 100W single-port maximum does not remain available in those shared modes.
Which charger includes the laptop cable?
The selected A2697/B2697 140W bundle includes a five-foot 240W USB-C-to-USB-C cable. A2663 and A2688 require separate cables, despite the conflicting Cable field on the A2663 Amazon listing.
Can the 140W adapter supply 140W to two laptops?
Its C1 + C2 allocation is 70W + 70W. One compatible laptop can use the published 140W ceiling on C1 or C2 alone; four-port use reduces total output to 134W.
Is a 60W cable enough for the full 65W or 100W rating?
A 60W cable does not establish support for A2663’s 20V/3.25A or A2688’s 20V/5A output. Check the cable’s voltage/current and power capability. The 140W mode also needs a cable and laptop supporting its 28V/5A PD 3.1 arrangement.
Does the power display guarantee continuous 140W charging?
The display reports adapter information; it does not prove sustained output. Anker states that the A2697 can reduce output during extended high-temperature use, and the laptop, cable and occupied ports still limit available power.
Sources and buying checks
Each US maker product page prints a full barcode found on its checked Amazon listing. Separate original named manuals and maker support pages establish the relevant output profiles and port allocations; no sibling charger’s figures are substituted.
Anker 715 A2663 — full barcode 194644065263: US product page and cable exclusion (anker.com), Named US support page and manual download (service.anker.com), Original US-linked A2663 manual PDF (salesforce-knowledge-download.s3.us-west-2.amazonaws.com).
Anker Prime A2688 — full barcode 194644040635: US product specifications and original quick-start download (anker.com), Named A2688 quick-start guide PDF (cdn.shopify.com), Maker support specifications including two-port allocation (service.anker.com).
Anker A2697 / B2697 cable bundle — full barcode 194644212087: US cable-bundle page, port budgets and conflicting weight figures (anker.com), Original named A2697 quick-start guide PDF (cdn.shopify.com).
USB-IF cable capability and Anker US policy: USB-C-to-USB-C cable power and data marking requirements (usb.org), Full current US warranty and direct-store return policy (anker.com), AnkerDirect channel named by Anker’s warranty-registration page (anker.com).
Use the exact barcode, selected package and current seller at checkout. Published output ceilings do not establish a measured charge time, every laptop’s full-performance charging or sustained power in every environment.