BLUETTI Apex 300 Portable Power Station, 2,764.8Wh vs BLUETTI Elite 30 V2 Portable Power Station, 288Wh
These are side-by-side facts taken from each product guide: published specifications, strengths and caveats as their sources state them. This page is not a test, a ranking or a verdict about which model is better.
BLUETTI Apex 300 Portable Power Station, 2,764.8Wh
Home or RV backup that needs 240V and room to expand
The Apex 300 stores 2,764.8Wh of LFP and delivers 3,840W at 120V or 240V from one unit. Its 0 ms UPS applies to two outlets in 240V mode only, the supplied cable charges at 1,800W, and USB or 12V outputs need the Hub D1. The manual lists it at about 83.78 lb.
Published specifications
- Manual: 2,764.8Wh LiFePO4 (51.2V, 54Ah); model Apex 300
- Manual: 3,840W; 4x 5-20R, TT-30R, 14-50R; 120V or 240V
- Manual: UPS 0 ms on two outlets at 240V; 20 ms otherwise
- Manual: 1,800W on 15A cable; 3,840W with optional P050A cable
- Manual: 2x solar 12-60V, 20A, 1,200W each
- Manual: 20.67 x 12.87 x 12.6 in, about 83.78 lb; up to 6 B300K
Strengths
- 120V or 240V output from a single unit, up to 3,840W
- Expands to 19,353.6Wh with six B300K batteries
- Detailed US manual on UPS outlets, ECO timing and charging cables
Caveats
- No USB or 12V outputs without the separately sold Hub D1
- Fast charging needs optional cables and possibly electrical work
- 0 ms UPS only on two outlets in 240V mode
Read the full BLUETTI Apex 300 Portable Power Station, 2,764.8Wh guide
BLUETTI Elite 30 V2 Portable Power Station, 288Wh
Phones, laptops, routers and lights during short outages or trips
The Elite 30 V2 packs 288Wh of LFP storage and 600W of AC into a 9.5-pound case with 140W USB-C and a 10 ms UPS. Its 1,500W Power Lifting mode suits heating loads only, solar input is 200W, and ECO mode must be switched off for small always-on devices. It cannot take extra batteries.
Published specifications
- Manual: 288Wh LiFePO4; model Elite 30 V2
- Manual: 600W AC total; Power Lifting to 1,500W resistive loads
- Manual: AC input 380W; bypass 980W; UPS 10 ms or less
- Manual: solar 12-28V, 10A, 200W max; car 12V or 24V
- Manual: charge 32-104°F; discharge -4-104°F; IP20
- Manual: 9.8 x 7 x 6.6 in, about 9.48 lb; page: 5-year warranty
Strengths
- 600W AC, 140W USB-C and a 10 ms UPS in a 9.5-pound unit
- Detailed US manual with clear port, charging and storage limits
- Pass-through charging up to 980W while plugged in
Caveats
- ECO mode is on by default and can cut small or critical loads
- No expansion; solar limited to 200W with the cable sold separately
- 1,500W lifting runs heaters at reduced power, not full wattage
Read the full BLUETTI Elite 30 V2 Portable Power Station, 288Wh guide
How to choose between them
Choose the BLUETTI Apex 300 Portable Power Station, 2,764.8Wh if your situation matches: Home or RV backup that needs 240V and room to expand. Its main caveat: No USB or 12V outputs without the separately sold Hub D1.
Choose the BLUETTI Elite 30 V2 Portable Power Station, 288Wh if your situation matches: Phones, laptops, routers and lights during short outages or trips. Its main caveat: ECO mode is on by default and can cut small or critical loads.
Both entries repeat what each guide records. Confirm the model, included parts and availability on the current listing before ordering.
Primary sources
- BLUETTI Apex 300 Home Battery Backup product page Source for BLUETTI Apex 300 Portable Power Station, 2,764.8Wh
- BLUETTI support page for the Apex 300 Source for BLUETTI Apex 300 Portable Power Station, 2,764.8Wh
- BLUETTI Apex 300 user manual PDF (US English) Source for BLUETTI Apex 300 Portable Power Station, 2,764.8Wh
- BLUETTI Elite 30 V2 product page Source for BLUETTI Elite 30 V2 Portable Power Station, 288Wh
- BLUETTI support page for the Elite 30 V2 Source for BLUETTI Elite 30 V2 Portable Power Station, 288Wh
- BLUETTI Elite 30 V2 user manual PDF (US English, V3.0) Source for BLUETTI Elite 30 V2 Portable Power Station, 288Wh
Primary sources checked .