Plain Buy Guides

As an Amazon Associate I earn from qualifying purchases. Links to Amazon on this page are affiliate links.

ChargePoint Home Flex Hardwired Level 2 EV Charger, J1772 (CPH50-HARDWIRE-L23) vs Emporia Classic Level 2 EV Charger, J1772, White (EMEVSE1)

These are side-by-side facts taken from each product guide: published specifications, strengths and caveats as their sources state them. This page is not a test, a ranking or a verdict about which model is better.

ChargePoint Home Flex Hardwired Level 2 EV Charger, J1772 (CPH50-HARDWIRE-L23)

A hardwired circuit where you want to pick the amperage to suit the panel

Home Flex is set at install to match your circuit, anywhere from 16 to 50 amps, with ChargePoint publishing the circuit-to-load table. This hardwired J1772 version can reach the 50-amp maximum, which needs a 70 or 80-amp circuit, and it is the configuration ChargePoint points to for outdoor mounting.

Published specifications

  • Guide: 50A max load on an 80A or 70A circuit; 48A on 60A; 40A on 50A; 16A on 20A
  • Guide: continuous load device, circuit must be rated for 125% of maximum load
  • Guide: dedicated 240V two-pole non-GFCI breaker; 90°C copper, max 6 AWG, terminal to 105°C
  • Guide: operating range -40°F to 122°F at 16-48A, -40°F to 113°F at 50A
  • Guide: mount centre 39-43 in above the floor; Wi-Fi signal required at the location
  • Guide: 3-year parts exchange warranty, original purchaser, single-family residence

Strengths

  • Maker publishes the full circuit-rating to maximum-load table, so sizing is checkable
  • Wide operating temperature range, down to -40°F at settings up to 48 amps
  • Hardwiring unlocks the 60, 70 and 80-amp circuit ratings a plug cannot use

Caveats

  • Warranty excludes on-site labour to uninstall or reinstall the station
  • No enclosure NEMA or IP rating appears in the guide or product page we read
  • Some app functions and troubleshooting need Wi-Fi at the charger's location

Check this model on Amazon

Read the full ChargePoint Home Flex Hardwired Level 2 EV Charger, J1772 (CPH50-HARDWIRE-L23) guide

Emporia Classic Level 2 EV Charger, J1772, White (EMEVSE1)

A hardwired 60-amp circuit, or a 50-amp industrial-grade 14-50 outlet

Emporia's Classic charger arrives with a NEMA 14-50 plug for 40 amps and converts to hardwired for 48 amps and 11.5 kW. It has a 25-foot J1772 cable, a watertight NEMA Type 4 enclosure and Wi-Fi scheduling, and Emporia itself recommends hardwiring where a GFCI breaker is required.

Published specifications

  • Maker: 208/240VAC input; 11.5 kW at 240V/48A hardwired, 9.6 kW at 240V/40A on the plug
  • Maker: dedicated 50A+ double-pole breaker for 40A, 60A+ double-pole for 48A
  • Maker: NEMA 14-50 outlet must be industrial-grade, continuous duty rated at 50A
  • Maker: watertight NEMA Type 4 enclosure, indoor or outdoor; 25 ft cable; J1772
  • Maker: NEC 625, SAE J1772, UL 817, UL 991, UL 2231, UL 2251, UL 2594
  • Maker: 3-year hardware warranty; labour and return shipping not covered

Strengths

  • One unit covers both a 40-amp plug-in and a 48-amp hardwired installation
  • Emporia names the exact breaker sizes and the receptacle grade required
  • Maker states the GFCI conflict openly and recommends hardwiring where it applies

Caveats

  • Full 48 amps needs hardwiring and a 60-amp circuit, not the supplied plug
  • Warranty excludes labour, diagnosis, removal, installation and return shipping
  • No operating temperature range is given on the product page or the listing

Check this model on Amazon

Read the full Emporia Classic Level 2 EV Charger, J1772, White (EMEVSE1) guide

How to choose between them

Choose the ChargePoint Home Flex Hardwired Level 2 EV Charger, J1772 (CPH50-HARDWIRE-L23) if your situation matches: A hardwired circuit where you want to pick the amperage to suit the panel. Its main caveat: Warranty excludes on-site labour to uninstall or reinstall the station.

Choose the Emporia Classic Level 2 EV Charger, J1772, White (EMEVSE1) if your situation matches: A hardwired 60-amp circuit, or a 50-amp industrial-grade 14-50 outlet. Its main caveat: Full 48 amps needs hardwiring and a 60-amp circuit, not the supplied plug.

Both entries repeat what each guide records. Confirm the model, included parts and availability on the current listing before ordering.

Primary sources

  1. ChargePoint Home Flex 16A-50A installation guide (75-001336-01 r9), supplied with the listing Source for ChargePoint Home Flex Hardwired Level 2 EV Charger, J1772 (CPH50-HARDWIRE-L23)
  2. ChargePoint Home Flex product page with configuration comparison Source for ChargePoint Home Flex Hardwired Level 2 EV Charger, J1772 (CPH50-HARDWIRE-L23)
  3. Emporia product page for the Classic Level 2 EV Charger (EMEVSE1) Source for Emporia Classic Level 2 EV Charger, J1772, White (EMEVSE1)
  4. Emporia warranty information page Source for Emporia Classic Level 2 EV Charger, J1772, White (EMEVSE1)

Primary sources checked .