Best digging bars

Six steel digging and tamping bars, compared on length, weight, working ends and steel, with the job each one suits.

As an Amazon Associate I earn from qualifying purchases.

On this page
  1. The picks
  2. Scores
  3. BAP‑175
  4. BAP‑150
  5. BAP‑125
  6. BAP‑100
  7. TB‑175
  8. TB‑12
  9. Compare the bars
  10. Length and weight
  11. Which end
  12. Steel and grip
  13. Bar for the job
  14. Setting a post
  15. Kinds of bar
  16. Where sources differ
  17. How to choose
  18. Questions
  19. How we pick

Quick answer

For most digging, get the Truper BAP‑175: 69 in. of 1 in. hex steel, 16 lb, with a point and a 72 mm chisel. It has the widest chisel and ties for the most leverage. For fence posts, the TB‑175 swaps the chisel for a tamper. For roots and garden beds, get the 8.5 lb BAP‑125.

Spec diagram of the Truper BAP‑175: 175 cm (69 in.) long, 1 in. hex section, 72 mm chisel at one end and a point at the other
Best for rock, roots and old concrete$59.66 at AmazonPrice as of Nov 16, 2026, 5:34 AM EST · low stock then
Check it on Amazon

Six digging bars worth buying

All six are made by Truper, the Mexican tool maker, and were new and in stock at our 6:10 AM check on Oct 22. Lengths run from 39 to 69 in.

Spec diagram of the Truper BAP‑175: 175 cm (69 in.) long, 1 in. hex section, 72 mm chisel at one end and a point at the other
Best for rock, roots and old concrete

Truper BAP‑175, 69 in.

$59.66 at Amazon
Check it on Amazon
Price as of Nov 16, 2026, 5:34 AM EST · low stock then
Details ↓
Spec diagram of the Truper BAP‑150: 150 cm (59 in.) long, 1 in. hex section, 72 mm chisel and a point
Best 5 ft bar with the wide chisel

Truper BAP‑150, 59 in.

$64.97 at Amazon
Check it on Amazon
Price as of Nov 16, 2026, 5:34 AM EST · low stock then
Details ↓
Spec diagram of the Truper BAP‑100: 100 cm (39 in.) long, 7/8 in. hex section, 60 mm chisel and a point
Best for tight spaces

Truper BAP‑100, 39 in.

$34.97 at Amazon
Check it on Amazon
Price as of Nov 16, 2026, 5:34 AM EST · low stock then
Details ↓
Dimension image of the Truper TB‑175 tamping bar: 69 in. long, 16 lb, 2 in. digging blade and 3 in. tamping head
Best for digging and tamping fence posts

Truper TB‑175, 69 in.

$92.82 at Amazon
Check it on Amazon
Price as of Nov 16, 2026, 5:34 AM EST
Details ↓
Dimension image of the Truper TB‑12 tamping bar: 48 in. long, 12 lb, digging tip at one end and a tamping face at the other
Best for deck and mailbox posts

Truper TB‑12, 48 in.

$64.98 at Amazon
Check it on Amazon
Price as of Nov 16, 2026, 5:34 AM EST · low stock then
Details ↓

How the six bars score

One formula for all six: length, weight, stated hardening, a hex bar, and how much Truper publishes about the bar.

BAP‑17510BAP‑1509.6BAP‑1259.2BAP‑1008.8TB‑175 tamper8.2TB‑12 tamper7.6010BAP‑17510BAP‑1509.6BAP‑1259.2BAP‑1008.8TB‑175 tamper8.2TB‑12 tamper7.6
Plain Buy Guides spec score out of 10, from five checks on Truper’s spec sheets and the Amazon listings. It’s our arithmetic, not a customer rating.

The four BAP bars score highest because Truper publishes a full spec sheet for each: length, weight, bar section, chisel width and a double heat treatment. Among them, longer and heavier bars score higher, since length is leverage and weight is what drives the point into hard ground.

The two tamping bars lose points on paperwork, not on size. Truper’s sheets give only their name, length and weight, so their hardening comes from the listings, and neither has a stated hex section.

The six bars in detail

Best for rock, roots and old concrete

Truper BAP‑175 San Angelo, 69 in.

175 cm (69 in.), 1 in. hex, code 10762
$59.66
Check it on Amazon
low stock · price as of Nov 16, 2026, 5:34 AM EST
10Spec scoreHow it’s scored
Reach10
Weight10
Hardening10
Hex bar10
Spec sheet10

Pros

  • Longest and heaviest San Angelo bar here
  • Point plus a 72 mm (2.8 in.) chisel
  • 1 in. hex bar for a firm grip
  • Double heat treatment on Truper’s sheet
  • Most leverage here, tied with the TB‑175

Cons

  • 16 lb is a lot to lift all day
  • Only 9 left at our check
  • Too long for tight trenches
  • No tamper end
69 in.16 lb1 in. hex72 mm chiselPoint endCode 10762

Buy it if

You’re breaking rock, cracking old concrete or cutting big roots, and you can handle a 16 lb bar.

Skip it if

You mostly set posts and want to pack the soil too. The TB‑175 has a tamper end.

The BAP‑175, code 10762, is the longest and heaviest San Angelo bar on this page. Truper’s spec sheet gives 175 cm (69 in.) of 1 in. hex steel weighing 7.3 kg, or 16 lb. It was new, sold by HLIsupply, with 9 left at our 6:10 AM check on Oct 22.

One end is a point, which Wikipedia describes as the end for breaking hard materials and prying. The other is a 72 mm chisel, about 2.8 in. wide, for cutting roots, digging and prying. That’s the widest blade here, shared with the BAP‑150, and near the top of the 1 to 3 in. range Wikipedia gives for chisel ends.

It’s also the one San Angelo bar here that matches a classic digging bar on every count. Wikipedia puts a typical bar at 5 to 6 ft long, 15 to 23 lb and about 1 in. across. At 5 ft 9 in., 16 lb and 1 in., the BAP‑175 sits inside all three.

Truper’s sheet says the steel gets a double heat treatment, and that the hex section gives a firmer grip. Truper makes it in Mexico and guarantees it against manufacturing and workmanship defects, claimable through any Truper distributor.

Length is leverage. With a rock or block as a pivot 6 in. from the tip, a 50 lb push on the far end lifts about 525 lb on an ideal lever. That ties the TB‑175 for the most here, and it’s why this bar is the one to reach for when a boulder or a slab has to move.

Weight is the trade. Lifted and dropped point first, 16 lb does far more work than a light bar, but it’s nearly twice the BAP‑125’s 8.5 lb to raise every stroke. On a long day of post holes, that adds up fast.

The Amazon title calls it 70 in. and 7.20 kg. Truper’s sheet says 175 cm, which is 69 in., and 7.3 kg. We show Truper’s length and score the lighter listing weight, which still earns full marks.

It scores 10.0 on our five checks. Our call: the bar for rock, big roots and old concrete, if you can swing it.

Best 5 ft bar with the wide chisel

Truper BAP‑150 San Angelo, 59 in.

150 cm (59 in.), 1 in. hex, code 10756
$64.97
Check it on Amazon
low stock · price as of Nov 16, 2026, 5:34 AM EST
9.6Spec scoreHow it’s scored
Reach9
Weight9
Hardening10
Hex bar10
Spec sheet10

Pros

  • Same 1 in. hex and 72 mm chisel as the BAP‑175
  • 10 in. shorter and about 2 lb lighter
  • Double heat treatment on Truper’s sheet
  • Point plus chisel
  • Strong leverage: about 442 lb from a 50 lb push

Cons

  • Only 4 left at our check
  • Listing and sheet disagree on weight
  • Just under the typical 5 ft length
  • No tamper end
59 in.13 to 14 lb1 in. hex72 mm chiselPoint endCode 10756

Buy it if

You want the BAP‑175’s heavy chisel and point in a bar that’s easier to carry and lift.

Skip it if

You need full 6 ft reach for deep holes or the most prying force. Get the BAP‑175.

The BAP‑150, code 10756, is the BAP‑175 cut down. Truper’s spec sheet gives 150 cm (59 in.) of 1 in. hex steel with the same 72 mm chisel at one end and a point at the other. It was new, sold by HLIsupply, with only 4 left at our 6:10 AM check on Oct 22.

The weight is the one number that doesn’t agree. Truper’s sheet says 6.4 kg, which it rounds to 14 lb. The Amazon title says 13 lb. We score the lower 13 lb, and it lands in the same weight band either way, one point short of the 16 lb bars.

Compared with the BAP‑175, you give up 10 in. of length and about 2 lb. In return you get a bar that’s easier to carry from the truck and easier to lift for each stroke.

Leverage stays strong. With the pivot 6 in. from the tip, a 50 lb push lifts about 442 lb on an ideal lever, against 525 lb for the 69 in. bar. Both are well ahead of the shorter bars on this page.

The same model is also listed on Amazon as Truper item 30103, a 60 in. San Angelo bar, and its bullets name it BAP‑150, 14 lb. That listing adds a rust-resistant black finish. It also had 4 left at our check, so either listing gets you this bar.

Like every BAP bar, it gets a double heat treatment, according to Truper’s sheet, and is made in Mexico. The hex section is the same 1 in. (25 mm) as the BAP‑175, which Truper says is for a firmer grip.

At 59 in., it sits just under the 5 to 6 ft that Wikipedia calls typical for a digging bar. It’s the shortest bar here with the wide 72 mm blade.

It scores 9.6, losing a point each on reach and weight. Our call: the heavy chisel and point in a 5 ft bar that’s easier to live with.

Best for garden beds and roots

Truper BAP‑125 digging bar, 49 in.

125 cm (49 in.), 7/8 in. hex, code 10753
$51.99
Check it on Amazon
in stock · price as of Nov 16, 2026, 5:34 AM EST
9.2Spec scoreHow it’s scored
Reach8
Weight8
Hardening10
Hex bar10
Spec sheet10

Pros

  • 8.5 lb: about half the BAP‑175
  • Point plus a 60 mm (2.4 in.) chisel
  • 7/8 in. hex bar
  • Double heat treatment on Truper’s sheet
  • No low-stock warning at our check

Cons

  • Less leverage than the 5 and 6 ft bars
  • Lighter strokes on rock
  • Narrower chisel than the 1 in. bars
  • No tamper end
49 in.8.5 lb7/8 in. hex60 mm chiselPoint endCode 10753

Buy it if

You’re loosening garden beds, cutting roots along a fence line or digging small holes, and want a bar you can use for an hour.

Skip it if

You’re breaking rock or concrete. The heavier BAP‑175 does more per stroke.

The BAP‑125, code 10753, is the middle of Truper’s BAP range. Its spec sheet gives 125 cm (49 in.) of 7/8 in. (22 mm) hex steel weighing 3.9 kg, or 8.5 lb, with a 60 mm chisel. It was new, sold by Ottenza and in stock at our 6:10 AM check on Oct 22.

Weight is why it’s here. At 8.5 lb, it’s about half the BAP‑175’s 16 lb. That makes it the easier bar to keep lifting and dropping in a flower bed, and one you can carry in one hand across a yard.

The ends match the longer BAP bars in layout, a point and a chisel, but the chisel is narrower: 60 mm, about 2.4 in. The listing says the point is for piercing and breaking ground, and the chisel for prying, breaking and shearing through tough roots.

The listing also names the jobs it’s sold for: clearing garden plots and fence lines, trenching in rocky soil, and fence post installs. For a fence’s worth of post holes in rocky clay, the 1 in. bars hit harder, but this one handles the roots and stones that stop a shovel.

Leverage is moderate. With the pivot 6 in. from the tip, a 50 lb push lifts about 358 lb on an ideal lever. That’s plenty for prying out a stubborn root ball or a fist-sized rock, but less than the 442 lb and 525 lb of the longer bars.

Truper’s sheet lists the same double heat treatment as the bigger bars, and the hex section is there for grip, in Truper’s words. It’s made in Mexico and covered by Truper’s guarantee against manufacturing and workmanship defects, claimable through any Truper distributor.

Unlike the two 1 in. BAP bars, it had no low-stock warning at our check, which matters if you need a bar this weekend.

It scores 9.2, losing a point each on reach and weight. Our call: the bar for gardens, roots and light post work.

Best for tight spaces

Truper BAP‑100 digging bar, 39 in.

100 cm (39 in.), 7/8 in. hex, code 10750
$34.97
Check it on Amazon
low stock · price as of Nov 16, 2026, 5:34 AM EST
8.8Spec scoreHow it’s scored
Reach7
Weight7
Hardening10
Hex bar10
Spec sheet10

Pros

  • Shortest and lightest pick: 39 in., 6.9 lb
  • Truper says it exceeds ASME B107.410
  • Point plus a 60 mm chisel
  • 7/8 in. hex bar that won’t roll
  • Double heat treatment on Truper’s sheet

Cons

  • Least leverage here
  • Too short to reach deep in a post hole
  • Lightest strokes
  • No tamper end
39 in.6.9 lb7/8 in. hex60 mm chiselPoint endCode 10750

Buy it if

You work in crawl spaces, trenches, raised beds or beside a foundation, where a long bar won’t fit.

Skip it if

You’re digging fence post holes. A longer bar reaches the bottom; try the BAP‑150.

The BAP‑100, code 10750, is the shortest bar here. Truper’s spec sheet gives 100 cm (39 in.) of 7/8 in. hex steel weighing 3.1 kg, or 6.9 lb, with a point and a 60 mm chisel. It was new, sold by HLIsupply and in stock at our 6:10 AM check on Oct 22.

It’s the only pick whose sheet names a standard. Truper says this bar exceeds ASME B107.410, a U.S. tool standard it lists as a federal specification. None of Truper’s other sheets here make that claim.

Short is the point of it. Wikipedia notes that digging bars are often used where there isn’t room to swing a pickaxe. At 39 in., about a yardstick plus 3 in., this bar works in a trench, under a deck or beside a foundation wall where a 6 ft bar can’t stand up.

The listing pitches it for breaking concrete, stone and hard-packed soil with the point, and for prying rocks or digging post holes in tight spaces. It also notes that the hex body keeps the bar from rolling when you lay it down, a small thing on a slope.

Leverage is the cost. With the pivot 6 in. from the tip, a 50 lb push lifts about 275 lb on an ideal lever, half of the BAP‑175’s 525 lb. For a big rock, a longer bar is the better tool.

The listing calls it 100 cm, or 40 in. Truper’s sheet says 39 in. We score the shorter figure. Either way it lands in our shortest reach band.

Like the other BAP bars, it gets a double heat treatment, according to Truper, and is made in Mexico, with Truper’s guarantee against defects.

It scores 8.8, losing three points on reach and three on weight across the two checks. Our call: the bar for cramped spots and light work.

Best for digging and tamping fence posts

Truper TB‑175 tamping bar, 69 in.

69 in., 16 lb, code 30162
$92.82
Check it on Amazon
in stock · price as of Nov 16, 2026, 5:34 AM EST
8.2Spec scoreHow it’s scored
Reach10
Weight10
Hardening8
Hex bar5
Spec sheet8

Pros

  • Digs and tamps: 2 in. blade plus a 3 in. tamping head
  • Full 69 in. and 16 lb
  • Drop-forged and heat-treated, per the listing
  • Rust-resistant black finish
  • No low-stock warning at our check

Cons

  • Truper’s sheet gives only length and weight
  • Round bar, not hex
  • Hardening claim is from the listing only
  • Blade narrower than the BAP chisels
69 in.16 lb1 in. round2 in. blade3 in. tamperCode 30162

Buy it if

You’re setting fence posts and want one bar to break the ground and pack the backfill.

Skip it if

You’re cutting big roots or splitting rock. The BAP‑175 has the wide chisel.

Truper’s sheet for code 30162, model TB‑175, names it a 69 in., 16 lb post hole digger and tamping bar. It was new, sold by HLIsupply and in stock at our 6:10 AM check on Oct 22.

It’s the same length and weight as the BAP‑175, with a different second end. The listing describes a chisel and point end for cutting and prying into compacted soil and rocky areas, and a flat end for tamping and packing material tight. Its spec images show a 2 in. digging blade at that end.

That flat end is the reason to buy it. Wikipedia describes a blunt end as a broad surface for tamping, typically 2 to 3 in. across. The listing’s spec image gives this one a 3 in. tamping head, the top of that range, on 1 in. round stock.

The listing sells it for post hole work: break tough ground, loosen soil, then tamp the backfill for a firm set. With one bar doing both jobs, you carry one less tool to each hole.

On construction, the listing says drop-forged and heat-treated steel with a rust-resistant black finish. Truper’s own sheet for this code doesn’t repeat those details, which is why it scores 8 on hardening instead of 10.

Leverage matches the BAP‑175: about 525 lb from a 50 lb push with the pivot 6 in. from the tip, on an ideal lever. Its 2 in. blade digs and pries, though it’s narrower than the 60 and 72 mm BAP chisels for slicing roots.

It loses its other points on the bar and the paperwork. The listing images show round stock, not hex, and Truper’s spec sheet is a single line of name, length and weight. That’s less than the full sheets behind the BAP bars.

It scores 8.2. Our call: the one bar to buy if fence posts are the job.

Best for deck and mailbox posts

Truper TB‑12 tamping bar, 48 in.

48 in., 12 lb, code 32902
$64.98
Check it on Amazon
low stock · price as of Nov 16, 2026, 5:34 AM EST
7.6Spec scoreHow it’s scored
Reach8
Weight9
Hardening8
Hex bar5
Spec sheet8

Pros

  • Digging edge plus a flat tamping head
  • 12 lb in a 4 ft bar
  • Induction-hardened ends, per the listing
  • Forged high-carbon steel, per the listing
  • 20 in stock at our check

Cons

  • Truper’s sheet gives only length and weight
  • Bar section and tamper size not stated
  • Less leverage than the 5 and 6 ft bars
  • No point end listed
48 in.12 lbDigging edgeFlat tamping headHardened endsCode 32902

Buy it if

You’re setting a mailbox post, deck posts or a few fence posts, and want a shorter bar that still tamps.

Skip it if

Your holes are deep or rocky. The longer TB‑175 reaches further and weighs more.

Truper’s sheet for code 32902, model TB‑12, names it a 48 in., 12 lb post hole digger and tamping bar. It was new, sold by Ottenza, with 20 left at our 6:10 AM check on Oct 22.

It’s the short partner to the TB‑175. The listing describes a sharp digging edge for breaking through hard soil at one end and a flat tamping head for compacting earth around posts at the other.

For a 4 ft bar, it’s heavy. At 12 lb, it weighs about 40% more than the BAP‑125, which is nearly the same length at 49 in. The listing says that weight gives the force and momentum to get through soil, and that the length lets you work standing upright with both hands.

On construction, the listing says forged high-carbon steel with induction-hardened ends. Truper’s own sheet for this code doesn’t repeat that, so it scores 8 on hardening rather than 10.

The listing names the jobs: fences, decks and other post foundations, plus breaking up compacted soil or rocks. A mailbox post is a good example of the scale it suits, and 811 Before You Dig lists a mailbox install as a dig that needs a call first.

Leverage is middling: about 350 lb from a 50 lb push with the pivot 6 in. from the tip, on an ideal lever. The listing describes a digging edge rather than a point, so it isn’t the bar for prying rocks.

Like the TB‑175, it loses points because its hardening claim comes from the listing, its bar section isn’t stated, and Truper’s sheet is a single line. It still clears our 7.0 floor.

It scores 7.6. Our call: a compact digging and tamping bar for small post jobs.

The six bars compared

From Truper’s spec sheets and the Amazon listings. Scroll sideways on a phone; tap a number heading to sort on a desktop.

BarSpec scoreLength (in.)Weight (lb)EndsBuy
Truper BAP‑17510.06916Point + 72 mm chiselCheck it on Amazon
Truper BAP‑1509.65913 to 14Point + 72 mm chiselCheck it on Amazon
Truper BAP‑1259.2498.5Point + 60 mm chiselCheck it on Amazon
Truper BAP‑1008.8396.9Point + 60 mm chiselCheck it on Amazon
Truper TB‑1758.269162 in. blade + 3 in. tamperCheck it on Amazon
Truper TB‑127.64812Digging edge + tamperCheck it on Amazon

The four BAP bars have a 1 in. or 7/8 in. hex section on Truper’s sheets. The TB‑175’s listing images show 1 in. round stock; the TB‑12’s section isn’t stated.

How long and how heavy a bar you need

Length gives leverage and reach. Weight drives the point into hard ground. Both cost you effort.

BAP‑17569 in.BAP‑15059 in.BAP‑12549 in.BAP‑10039 in.TB‑175 tamper69 in.TB‑12 tamper48 in.BAP‑17569 in.BAP‑15059 in.BAP‑12549 in.BAP‑10039 in.TB‑175 tamper69 in.TB‑12 tamper48 in.
Bar length from Truper’s spec sheets. Wikipedia gives 5 to 6 ft (60 to 72 in.) as typical.
BAP‑17516 lbBAP‑15014 lbBAP‑1258.5 lbBAP‑1006.9 lbTB‑175 tamper16 lbTB‑12 tamper12 lbBAP‑17516 lbBAP‑15014 lbBAP‑1258.5 lbBAP‑1006.9 lbTB‑175 tamper16 lbTB‑12 tamper12 lb
Weight from Truper’s spec sheets. The BAP‑150’s listing says 13 lb; we score that lower figure. Wikipedia gives 15 to 23 lb as typical.

Wikipedia describes a typical digging bar as 5 to 6 ft long and 15 to 23 lb, about 1 in. across. Only the BAP‑175 and the TB‑175 reach that length and weight here. The shorter bars trade force for a weight you can lift all afternoon.

Heavier isn’t automatically better. A 16 lb bar dropped point first breaks more ground per stroke, but you raise it every time. If the job is roots in a garden bed, the 8.5 lb BAP‑125 gets more strokes in before your arms quit.

BarLengthLeverage at a 6 in. pivotLift from a 50 lb push
BAP‑17569 in.10.5 to 1About 525 lb
TB‑17569 in.10.5 to 1About 525 lb
BAP‑15059 in.8.8 to 1About 442 lb
BAP‑12549 in.7.2 to 1About 358 lb
TB‑1248 in.7.0 to 1About 350 lb
BAP‑10039 in.5.5 to 1About 275 lb

The table is lever arithmetic. Set the bar on a rock or a block 6 in. from the tip, push down 50 lb on the far end, and the tip lifts the push times the ratio of the long side to the short side. It’s an ideal lever, so it ignores friction and the bar’s own weight, but it shows how much each extra foot of bar is worth.

Moving the pivot closer to the tip raises the ratio on any bar. The longer bar still wins at the same pivot, which is why the 69 in. bars are the ones for boulders and slabs.

Point, chisel or tamper: which end you need

Most digging bars have a different shape at each end, so one bar does two jobs.

EndWhat it’s forTypical sizePicks with it
PointBreaking hard materials and pryingNot givenAll four BAP bars
ChiselA sharpened blade for cutting roots, digging and prying1 to 3 in. wideBAP‑175 and BAP‑150 (72 mm); BAP‑125 and BAP‑100 (60 mm); TB‑175 (2 in. blade)
WedgeAn unsharpened blade for digging, breaking and prying1 to 3 in. wideNone stated
Blunt (tamper)A broad, flat surface for tamping soil2 to 3 in. acrossTB‑175 (3 in., per its listing image) and TB‑12 (size not stated)

The end shapes and typical sizes come from Wikipedia’s digging bar article. It notes that each end usually has a different shape, so a single bar gives you two tools. The BAP bars pair a point with a chisel; the TB bars pair a digging end with a tamper.

If you’ll set posts, the tamper end saves a second tool. If you’ll cut roots or split rock, the chisel and point matter more. None of the six has all three, so pick by the job you’ll do most.

Steel, hardening and the hex bar

What Truper and the listings say about each bar’s steel, section and finish.

BarSteel and hardeningSectionFinish
BAP‑175Double heat treatment (Truper sheet)1 in. hexNot stated
BAP‑150Double heat treatment (Truper sheet)1 in. hexBlack, rust-resistant (30103 listing)
BAP‑125Double heat treatment (Truper sheet)7/8 in. hexNot stated
BAP‑100Double heat treatment; exceeds ASME B107.410 (Truper sheet)7/8 in. hexNot stated
TB‑175Drop-forged, heat-treated (listing)1 in. round (listing image)Black, rust-resistant (listing)
TB‑12Forged high-carbon steel, induction-hardened ends (listing)Not statedNot stated

Heat treatment hardens the steel so the point and blade hold their shape when they hit rock. Truper’s sheets state a double heat treatment for every BAP bar. For the TB bars, the hardening claim comes from the listings only, which is why they score 8 instead of 10 on that check.

Wikipedia says digging bars are usually forged steel, either round or hexagonal, about 1 in. across. Truper says its hex section is for a firmer grip, and the BAP‑100 listing adds that a hex bar won’t roll away when you set it down.

Which bar for which job

Match the bar to the work you’ll do most. The first row that fits is usually your pick.

JobStart withWhy
Breaking rock or old concreteBAP‑175Point, 16 lb and the most leverage
Prying a boulder or slabBAP‑175 or BAP‑150About 525 or 442 lb from a 50 lb push at a 6 in. pivot
Fence post holes, then tampingTB‑175Digs and tamps with one 69 in. bar
Deck or mailbox postsTB‑124 ft, 12 lb, with a tamping head
Roots in garden beds and fence linesBAP‑12560 mm chisel on an 8.5 lb bar
Trenches, crawl spaces, beside a foundationBAP‑10039 in. fits where a long bar can’t

Wikipedia lists the common uses: breaking up clay, concrete, frozen ground and other hard material, moving or breaking tree roots and obstacles, and making holes for fence posts. Ice fishers use a spud bar to test ice, but that’s a different tool with its own chisel.

A bar loosens the ground; it doesn’t lift the dirt out. Pair it with a shovel or a manual post hole digger for that. For a long fence line, a gas auger from our post hole digger guide drills the holes and leaves the bar for the rocks it hits.

Setting a post with a digging bar

The bar does two jobs on a post: breaking the ground and packing the backfill.

StepWhat to doWho says so
1Contact 811 a few days before you dig, even for a shallow hole811 Before You Dig
2Break tough ground and loosen the soil with the point or chiselTruper TB‑175 listing
3Lift the loose soil out with a shovel or manual post hole digger, and repeatWikipedia (bars used for post holes)
4Set the post and backfill around itTruper TB‑175 listing
5Tamp the backfill with the flat end for a firm setTruper TB‑175 and TB‑12 listings

811 Before You Dig says every digging project needs a call to 811 a few days ahead, whatever the depth, because some utilities sit just inches below the surface. It lists installing a mailbox and planting trees as examples.

What 811 Before You Dig saysWhy it matters for a bar
Some utilities are buried just inches below the surfaceA hand tool can reach a shallow line
Shovels are the number 2 tool when buried utilities are damaged, after backhoesHand tools count; a small job can hit a line
Not contacting 811 is the top cause of damage to buried utilitiesThe call is the step people skip
Damage to buried utilities costs the U.S. about $30 billion a yearRepairs plus wider costs to the community

Spud bar, San Angelo bar: the names

The same long steel bar goes by many names. Wikipedia lists these, and here’s where each fits.

NameWhat sets it apartIn this guide
San Angelo barA wedge at one end; the BAP‑175 and BAP‑150 are listed under this name on AmazonYes: BAP‑175, BAP‑150
Digging bar, dig bar, digger barThe general name for a long, straight bar for breaking groundYes: all six
Tamping barA blunt end for packing soil around postsYes: TB‑175, TB‑12
Spud barA chisel at one end for chipping or shaving; some have wide ends for removing old shinglesSame family; North American name for a digging bar
Pinch point barA chisel at one endLeft out: Truper’s PPB‑51 leads with prying and lifting
Lining barTapered, square section; shifts railroad trackNo: a railroad tool
Ice spudA chisel for cutting holes in ice and testing itNo: an ice fishing tool
Hop bar2 m (79 in.) or longer with a heavy spike, for hop pole holesNo: a farm tool

Names shift by region too. Wikipedia says the tool is called a crowbar in Australia and New Zealand and often a pry bar in Canada, and its article warns not to confuse a digging bar with a crowbar. The shorter pry bars sold for prying nails and trim are a different buy from the long bars on this page.

BarWhy it isn’t a pickWhat it does well
Truper PPB‑51 pinch point bar, 51 in., 12 lbIts listing leads with prying and lifting; no tamper, and the TB‑12 covers this sizeDrop-forged, heat-treated, black finish (listing)
Truper 30103 San Angelo, 60 in.The same BAP‑150 bar under another item number; 4 leftLists a rust-resistant black finish
True Temper 1160000 digging and tamper bar, 71 in.No maker page we could find; distributor listings differ on its specsBlade end plus a tamper head
Corona digging barNot checked against Corona’s own documents; 3 left at our checkNot checked further
Bully Tools 68 in. digging barOut of stock at our checkNot checked further
Bon Tool San Angelo barUnavailable at our checkNot checked further
Leriton, AbraveOcean, Moosefield barsLittle-known brands with no maker spec sheets to checkWide range of lengths

Where Truper’s sheet and the listing disagree

When the two give different figures, we show both and score the lower one.

BarTruper’s sheetAmazon listingWhat we did
BAP‑175 length175 cm (69 in.)70 in.Showed 69 in.; same score either way
BAP‑175 weight7.3 kg (16 lb)16 lb (7.20 kg)Scored 7.20 kg, about 15.9 lb; still full marks
BAP‑150 weight6.4 kg (14 lb)13 lbScored 13 lb
BAP‑100 length100 cm (39 in.)100 cm (40 in.)Scored 39 in.
BAP‑125 chisel60 mm60 mm (2.3 in.)60 mm is about 2.4 in.; no effect on the score

Which digging bar fits your job?

Answer these in order. The first yes is usually your pick.

QuestionIf yesIf no
Are you setting posts and want to tamp with the same bar?TB‑175 for fences; TB‑12 for decks and mailboxesRead on
Is the ground rocky, or is there concrete to break?BAP‑175Read on
Do you want a long bar that’s easier to carry?BAP‑150Read on
Is there no room to stand a long bar up?BAP‑100BAP‑125

Price isn’t in this table on purpose. Check the live prices on Amazon against the job: if the bar saves you renting a breaker for one afternoon of rock, the heavier bar is the better buy.

Wear work gloves and sturdy boots for any of these. A dropped 16 lb bar lands hard, and our work boots guide covers safety-toe options.

Questions people ask

What is the best digging bar?

For most jobs, the Truper BAP‑175: 69 in. of 1 in. hex steel, 16 lb, with a point and a 72 mm chisel and a double heat treatment on Truper’s sheet. For fence posts, the Truper TB‑175 adds a tamping end. For gardens and roots, the 8.5 lb BAP‑125.

What is a digging bar used for?

Breaking up clay, concrete, frozen ground and other hard material, moving or breaking tree roots and rocks, and making holes for fence posts, according to Wikipedia. It’s often used where there isn’t room to swing a pickaxe.

What is a spud bar?

Another name for a digging bar in North America. Wikipedia describes a spud bar as having a chisel at one end for chipping or shaving material away, and some have wide ends for stripping old shingles.

What is a San Angelo bar?

A digging bar with a wedge at one end, according to Wikipedia. Truper’s BAP bars pair a point with a chisel, and the BAP‑175 and BAP‑150 are listed as San Angelo bars on Amazon.

What is a tamping bar?

A digging bar with a blunt, flat end for packing soil around posts. Wikipedia gives 2 to 3 in. as a typical tamper size, and the Truper TB‑175’s listing gives 3 in. The TB‑175 and TB‑12 pair a tamper with a digging end.

How long should a digging bar be?

Wikipedia gives 5 to 6 ft as typical. Longer bars give more leverage: at a 6 in. pivot, a 50 lb push lifts about 525 lb with a 69 in. bar and about 275 lb with a 39 in. bar. Short bars suit tight spaces.

How heavy should a digging bar be?

Wikipedia gives 15 to 23 lb as typical. The picks here run from 6.9 lb (BAP‑100) to 16 lb (BAP‑175 and TB‑175). Heavier bars break more ground per stroke; lighter ones are easier to lift all day.

What is the best digging bar for rock?

The Truper BAP‑175. It has a point for breaking hard material, ties for the most weight here at 16 lb, and at 69 in. ties for the most leverage for prying rocks loose.

Can a digging bar break concrete?

Yes. Wikipedia lists concrete among the hard materials digging bars break up, and the BAP‑125 and BAP‑100 listings name concrete slabs and pavement. For a large slab, the heavier BAP‑175 does more per stroke.

Do I need to call 811 before using a digging bar?

Yes. 811 Before You Dig says every digging project needs a call a few days ahead, whatever the depth, because some utilities sit just inches down. Shovels are the second most common tool in utility damage.

Is a digging bar the same as a pry bar or crowbar?

Not quite. Wikipedia says digging bars are called crowbars in Australia and New Zealand and pry bars in Canada, but it also warns not to confuse a digging bar with a crowbar. Short pry bars for nails and trim are a different tool.

Are hex or round digging bars better?

Truper says its hex section gives a firmer grip, and the BAP‑100 listing adds that a hex bar won’t roll when you set it down. Wikipedia says bars come in both round and hexagonal forged steel.

How we pick digging bars

How we pick

We looked for one-piece steel digging and tamping bars from a maker that publishes spec sheets for them, then kept the ones that score 7.0 or more on one formula. Truper publishes a sheet for each of its bars, so all six picks come from its range.

At 6:10 AM on Oct 22, 2026, the Amazon listings showed all six new and in stock, sold by the sellers HLIsupply and Ottenza.

Why trust us

Isaac Daniels owns and edits Plain Buy Guides. The sizes, ends and steel details here come from Truper’s own spec sheets, with the Amazon listings where Truper is silent and Wikipedia for typical sizes. Each source is named below.

The spec score, check by check

Each check scores 0 to 10 and counts one fifth of the total. Anything not stated scores 5. When Truper’s sheet and the listing disagree, we score the lower figure. A bar needs 7.0 to be picked. It’s our score, not a customer rating.

Check (weight)How it’s scored
Reach (1/5)Length: 10 for 66 in. or more; 9 for 56 to 65; 8 for 46 to 55; 7 for less
Weight (1/5)10 for 15 lb or more; 9 for 11 to 14.9; 8 for 8 to 10.9; 7 for less
Hardening (1/5)10 when Truper’s sheet states a double heat treatment; 8 when heat treatment or hardened ends appear in the listing only; 5 when not stated
Hex bar (1/5)10 when the maker states a hex section; 5 for a round or unstated section
Spec sheet (1/5)10 when the maker publishes length, weight, section and blade width; 8 for length and weight only; 5 for none
TotalAverage of the five, to one decimal
BarReachWeightHardeningHex barSpec sheetScore
Truper BAP‑175101010101010.0
Truper BAP‑150991010109.6
Truper BAP‑125881010109.2
Truper BAP‑100771010108.8
Truper TB‑17510108588.2
Truper TB‑12898587.6

Sources

  • Truper S.A. de C.V., product spec sheets for codes 10762 (BAP‑175), 10756 (BAP‑150), 10753 (BAP‑125), 10750 (BAP‑100), 30162 (TB‑175), 32902 (TB‑12) and 30156 (PPB‑51), truper.com, read Oct 22, 2026
  • Wikipedia, “Digging bar” (revision 1355768284), read Oct 22, 2026
  • 811 Before You Dig, home page, 811beforeyoudig.com, read Oct 22, 2026
  • Amazon listings and their spec images for the six picks, and listings for Truper 30103 and 30156, True Temper 1160000, Corona, Bully Tools, Bon Tool, Leriton, AbraveOcean and Moosefield bars, read Oct 22, 2026
  • Amazon offer and image reads, Oct 22, 2026, 6:10 AM EDT

Related guides