As an Amazon Associate I earn from qualifying purchases. Our product guides include affiliate links to Amazon.
Tool-connected dust collection
Dust extractor: match the tool, outlet and complete kit
For repeated sanding or cutting with a compatible dust port, start with a corded extractor that offers tool-triggered start and automatic filter cleaning. Compare the DEWALT DWV010’s 8-gallon body with Makita’s larger VC4210L, but check the tool-outlet rating before plugging in your saw. For portable cleanup where a cord is inconvenient, the Makita XCV11Z uses one 18V LXT battery. It needs manual starting and filter cleaning; it is not a cordless equivalent of the larger corded setups.
Based on manufacturer pages and full manuals checked October 9, 2026. We have not tested dust capture, suction, noise or filter life. Published conflicts remain visible below.
Choose the working setup first
Match the extractor to your tool’s collection requirements and connection. Tank size, maximum airflow and a HEPA label do not establish how much dust a complete tool-and-hose setup captures.
Four exact models, with maker capabilities and the limits that can change your purchase. These are not tested performance rankings.
One 18V LXT battery; 2-gallon dust / 1.2-gallon water capacity; 57 CFM on high.
Battery and charger extra. No tool-triggered start or automatic filter cleaning documented. Tool-port adapter may also be extra.
The vacuum’s amp rating is not the tool-outlet allowance
Makita VC4210L, North American version: the full manual’s CA / US / MX column specifies 110–120 V, a 550 W / 4.6 A connected-tool socket limit and 1,440 W / 12 A total connected load. The larger 2,400 W socket figure belongs to a different regional version. Do not plug a higher-load saw into the US socket simply because Makita advertises a 12 A extractor.
DEWALT DWV015: its manual explicitly says the 15 A maximum is the total load of the running vacuum and the tool connected to its receptacle. It is not a 15 A allowance for the tool alone. Check the actual tool and extractor ratings before choosing outlet-triggered operation.
DEWALT DWV010: the manual warns not to exceed 15 A and distinguishes a 15 A rated current from 11.8 A nominal motor current. Its product feature text calls the motor 15 A. We do not convert that description into an extra 15 A tool allowance. Use the ratings and instructions for the supplied unit.
If your tool exceeds the extractor’s socket limit, choose a compatible setup that powers the tool separately and starts the extractor as its instructions permit. Tool-triggered start is a convenience, not a reason to overload the receptacle.
Check the hose end, tool port and required airflow
Measure the actual connection: match the tool’s extraction port to the hose cuff or named adapter. A hose’s internal diameter alone does not prove its end fits. DEWALT’s manuals describe AirLock connections; do not assume every tool port locks directly onto them.
Compare the supplied hose: DWV010 lists the DWV9316 anti-static hose; the product page says 15 feet, while the manual’s accessory table says 14 feet. DWV015 lists a 15-foot, 36 mm hose and 36 mm AirLock adapter. Makita VC4210L lists a 1¼-inch by 13-foot hose with several cuffs; XCV11Z lists a 1-inch by 6.5-foot hose.
Budget any missing tool adapter: XCV11’s manual describes an optional 22–38 joint or 24 mm front cuff, depending on the tool. Its supplied upholstery and crevice nozzles do not establish direct sander fit. A shroud, dust attachment or matching adapter required by your tool may be a separate purchase on any setup.
Follow the tool’s collection requirements: maker airflow and water-lift figures describe the extractor, not independently tested capture through your shroud, hose and filters. Restrictions, dust loading and the tool connection matter. We do not rank the models by tested capture or claim that 57 CFM substitutes for every corded application.
HEPA does not approve a whole hazardous-dust job. OSHA’s construction silica rule requires the controls, work practices and any respiratory protection applicable to the actual task. For example, specified drilling methods call for the tool maker’s recommended airflow and a filter-cleaning mechanism. A HEPA label alone does not prove the complete setup complies. Check the exact tool, shroud, extractor instructions and applicable rule; these are not universal hazardous-material vacuums.
Exact models and what comes in the box
DEWALT DWV010: corded collection in an 8-gallon body
Consider this when you want tool actuation and automatic filter cleaning in the smaller DEWALT body described here. The maker lists 21 lb, heavy-duty wheels and casters, and alternating filter-cleaning pulses every 30 seconds. The manual describes a short start delay and approximately 15 seconds of run-on after the connected tool stops.
The product page lists the extractor, two DWV9330 HEPA filters, the DWV9316 anti-static hose and one DWV9402 fleece bag. Match the exact DWV010 package and tool connection; replacement bags, extra cuffs and your tool’s dust attachment are separate as needed.
Published differences: DEWALT’s overview gives 155 CFM; its feature list and the listing give 150 CFM. Hose length is 15 feet on the product page versus 14 feet in the manual’s accessory table. DEWALT’s page and manual list a three-year limited warranty, one year of free service and a 90-day guarantee, while the Amazon model-data field says one-year limited warranty. Confirm the applicable US warranty and exact package before ordering; we do not resolve those conflicts by choosing the more favorable figure.
DEWALT DWV015: larger tank with variable suction
Consider it when the 10-gallon tank, telescoping handle and variable suction suit your work. The maker lists 155 CFM, 73 inches of water lift, automatic cleaning every 30 seconds and tool actuation. The current manual describes approximately seven seconds of run-on, rather than the DWV010’s 15 seconds. AirLock is not exclusive to this model.
The product page includes list names the extractor, two DWV9330 HEPA filters, the DWV9336 15-foot 36 mm anti-static hose and DWV9036 36 mm AirLock adapter. Although the overview discusses fleece bags, it does not list one in that package. Budget the bag appropriate to the job instead of assuming it is supplied. The page lists a three-year limited warranty.
Wireless-start check: the currently linked type-10 manual describes Wireless Tool Control and an optional DCV040 remote, but one pairing note names DWV905. The product page describes Tool Connect tag readiness, which concerns tracking and does not itself establish wireless starting. Verify the actual DWV015 unit’s controls and supplied instructions before buying it for wireless actuation. It is not Makita AWS.
This model is included for comparison without an Amazon buying link.
Makita VC4210L: larger corded tank, with an optional AWS route
Consider this when its larger tank and filter system suit the job and your tool fits the socket limit. Makita lists 148 CFM, 92 inches of water lift and 35 lb dry weight. The 11-gallon label is tank volume; the maker lists approximately nine gallons for wet collection. Its tool-activated socket has a 10-second off delay, and the filter cleaning is automatic.
The supplied collection parts include the 1¼-inch by 13-foot anti-static hose, wet/dry HEPA filter, main flat filter, quick-click and quick-connect fittings, 15/16-inch and 1¾-inch cuffs, fleece filter bags and plastic disposal bags. The list also names an interlocking-case adapter plate, hose hook, diffuser and crevice nozzle. Match your tool port; included cuffs are not a promise of universal fit.
AWS needs more than this extractor: Makita specifies the WUT02U adapter, sold separately, for wireless start with an AWS-capable tool. The adapter package includes a transmitter; check whether your exact tool accepts it. Buying the extractor does not add AWS to an arbitrary tool or to the XCV11Z.
Figures to keep separate: Makita’s product copy gives the main flat filter’s 99.95% rating at both 2 microns and 0.2 microns. Its separate HEPA figure is 99.97% at 0.3 microns. The product lists 60 dB(A) operating sound; the manual distinguishes 60 ±2 dB(A) sound level from 68 ±2 dB(A) sound pressure. These figures do not prove this is the quietest complete setup.
This model is included for comparison without an Amazon buying link.
Makita XCV11Z: portable cleanup, battery and charger extra
Consider it for portable cleanup when you already own a compatible 18V LXT battery and charger. The manual lists 46 CFM on normal and 57 CFM on high, two gallons of recoverable dust capacity and 1.2 gallons of water capacity. Makita’s 10.1 lb figure includes a 5.0Ah battery; it is not the bare tool’s weight. Its up-to-60-minute runtime claim uses the BL1850B 5.0Ah pack and does not establish an hour on high with a loaded hose.
XCV11Z is tool only. The maker lists the 162518-0 wet/dry HEPA filter, 199827-4 prefilter set, upholstery and crevice nozzles, and 140G04-3 anti-static hose. The battery, charger, shoulder strap and any required tool-port adapter are extra. The manual lists compatible batteries including BL1850B and chargers including DC18RC; check the complete compatibility list for your pack and charger rather than treating CXT or XGT batteries as LXT.
Makita lists a three-year limited warranty. Its manual describes user-operated filter cleaning and no automatic tool-start socket or AWS connection. A connected hose does not start it with the tool. The manual also warns against large planer shavings and concrete pieces that can clog the hose; skip it as a bulk-chip collector.
Wet/dry does not mean the same filter setup
DWV010 and DWV015: their manuals require removing the HEPA filters for wet pickup, using the specified electrical protection and keeping a power tool disconnected from the extractor’s receptacle during wet operation. Reinstall the appropriate filters for dry dust after the prescribed cleanup and drying. The wet setup is not a HEPA-filtered dry-dust setup.
Makita: VC4210L’s instructions keep the filters installed for liquids while removing the bag and following its liquid-limit procedure. XCV11’s instructions require drying its HEPA filter, damper, prefilter and tank after water or wet dust. Do not transfer DEWALT’s filter-removal instruction to either Makita. Use the exact manual; nominal tank gallons are not a promise of equal recoverable water capacity.
When to buy a different tool—or keep what you have
For ordinary garage spills or loose debris without a tool-connected collection requirement, compare the existing wet/dry shop-vac guides. Keep your current vacuum if its approved filter, connection and collection performance already meet your actual task; automatic start alone may not justify replacing it.
For a planer’s large chip output or a machine with a larger collection port, investigate the machine maker’s required bulk-chip collector instead of assuming one of these narrow hoses fits the job. An air-cleaning unit works on room air and does not replace collection at the cutting or sanding point.
For the tool itself, the track saw versus table saw guide and compact-router guide compare complete cutting setups. Dust collection is an additional fit decision, not a reason to buy a saw or router you do not need.
Common buying questions
Is a dust extractor different from a shop vac?
The tool-connected job is the main buying distinction. The corded models here offer tool actuation and automatic filter cleaning. Those features are not universal: the portable XCV11Z needs manual starting and filter cleaning. Match the required filtration and actual tool connection rather than buying by the label alone.
Can I plug a 15 A saw into the extractor?
Do not assume so. The US VC4210L manual limits its connected-tool socket to 550 W / 4.6 A. DWV015’s 15 A rating is the total running load of extractor and attached tool. Check the actual tool, unit and supplied manual before choosing outlet-triggered operation.
Does the Makita XCV11Z include a battery or start with my tool?
No battery or charger is included in the named XCV11Z package. Its manual documents manual starting and filter cleaning, not a tool-start outlet or AWS. Match your approved 18V LXT battery, charger and any tool-port adapter separately.
Does HEPA make the setup comply with OSHA silica rules?
No. Filtration is one part of a task-specific collection setup. The actual tool, airflow, shroud, filter-cleaning mechanism, work practices and any required respiratory protection govern the applicable method. Check the exact instructions and OSHA rule; owning a HEPA vacuum alone does not establish compliance.
Can I use the same filters for wet and dry pickup?
Follow the exact model’s manual. The two DEWALT manuals require removing HEPA filters for wet pickup. The Makita instructions keep their specified filtration components in place and require the appropriate drying afterward. Tank volume and recoverable liquid capacity also differ.
Sources and buying limits
These documents establish published capabilities, parts and restrictions, not our tested capture, noise, durability or price rankings. Check the exact model, seller, condition, package, voltage and required extras on Amazon before ordering; listings can change. The two unlinked models remain comparisons, not claims that every seller is unavailable.