Plain Buy Guides

As an Amazon Associate I earn from qualifying purchases. Our product guides include affiliate links to Amazon.

Spindle sander buying guide

Oscillating spindle sanders: table, stroke and spindle sizes

Pick by how you will hold the work. The WEN 6510T is a 35 lb benchtop sander with six sleeve sizes up to 3 inches. The WEN AT6535 adds a 14-1/2 inch table that bevels to 45 degrees. The WEN HA5932 is a 5 lb handheld sander that clamps upside down to a bench. The JET JBOS-5 is a 77 lb machine with a 1 inch stroke and a tilting table.

Prepared October 18, 2026 from WEN's and JET's product pages, manuals and warranty terms, and the exact Amazon listings. These picks are built from the makers' published specs and manuals.

Choose by table and portability

Decide whether you need a tilting table for angled edges or a sander you can carry, then compare stroke and sleeve sizes.

Four oscillating spindle sanders compared
Your jobModelUseful differenceCheck or skip
Benchtop, widest sleeve rangeWEN 6510T3.5 A; 2000 RPM; 58 OPM with 5/8 in. travel; six 80-grit sleeves from 1/2 to 3 in.; 3-5/8 in. max workpiece height; 35 lb in the manual.WEN does not list a tilting table. Confirm the sleeve sizes you need.
Bevel sanding up to 45 degreesWEN AT65353.5 A; 2000 RPM; 58 OPM; 14-1/2 x 14-1/2 in. table that bevels 0 to 45 degrees; five sleeves from 1/2 to 2 in.; 33.2 lb.Largest sleeve is 2 in.; see the 6510T for 3 in.
Portable, or clamped to a benchWEN HA59325 A; 1800 to 3200 RPM variable; 50 to 90 oscillations per minute with a 1/4 in. stroke; sleeves 1/2 to 1-1/2 in.; 5 lb; clamps and mounting pad included.Shortest stroke and smallest top sleeve here. Use the included clamps and mounting pad for bench use.
Heavier shop machine, longest strokeJET JBOS-51/2 HP induction motor; 1,725 RPM; 30 OPM with a 1 in. stroke; table tilts 0 to 45 degrees; spindles from 1/4 to 2 in.; 77 lb in the manual.Heaviest here at 77 lb; plan a sturdy bench. Confirm the seller before ordering.

Check stroke, table and weight

Exact models and buying options

WEN 6510T

Choose the 6510T for a compact benchtop sander with the widest sleeve range here. WEN lists a 3.5 amp motor at 2000 RPM, 58 oscillations per minute, six 80-grit sleeves (1/2, 3/4, 1, 1-1/2, 2 and 3 inches), five rubber drums, onboard storage for the spindles, sleeves and table inserts, and a dust port.

The 6510T manual lists 120V, 3.5A, 2000 RPM no-load, 58 OPM with 5/8 inch of travel, a 1/2 inch spindle, a 3-5/8 inch maximum workpiece height and 35 lb. WEN's page says 30 lb, so we use the manual figure. WEN's page lists SKU 6510T with barcode 044459651062, which matches the Amazon listing UPC.

Skip it when: You need to sand bevels (see the AT6535 or JET JBOS-5) or want to carry the sander to the work (see the HA5932).

Warranty: The 6510T manual gives two years from date of purchase for home use and 90 days for professional or commercial use.

Check WEN 6510T on Amazon

Editor: Isaac Daniels

WEN AT6535

Choose the AT6535 to sand angled edges. WEN lists a 14-1/2 by 14-1/2 inch table that bevels from 0 to 45 degrees, a 3.5 amp motor at 2000 RPM, 58 oscillations per minute with a 5/8 inch stroke, five 80-grit sleeves, four rubber drums, ten throat plates and onboard storage.

The AT6535 manual lists 120V AC, 3.5A, 2000 RPM, 58 OPM, sleeves of 1/2, 3/4, 1, 1-1/2 and 2 inches, a dust port of 2 inches outside diameter, 33.2 lb and 14-3/4 x 14-3/4 x 16-3/4 inches assembled. WEN's page lists SKU AT6535 with barcode 044459065357, which matches the Amazon listing UPC.

Skip it when: You need a 3 inch sleeve for gentle curves (see the 6510T).

Warranty: The AT6535 manual gives two years for personal use and shorter coverage for professional or commercial use, for the original purchaser.

Check WEN AT6535 on Amazon

WEN HA5932

Choose the HA5932 to take the sander to the work, or to save bench space. WEN describes a handheld spindle sander that becomes a benchtop sander when clamped upside down to a workbench with the included clamps and mounting pad, plus an adjustable straight-edge guide plate and a 1-1/2 inch dust port.

The HA5932 manual lists 120V, 5A, 650W, 1800 to 3200 RPM, 50 to 90 oscillations per minute, a 0.25 inch stroke, sleeves of 1/2, 3/4, 1 and 1-1/2 inches, 3 inch drums and 5 lb. WEN's page lists SKU HA5932 with barcode 044459059325, which matches the Amazon listing UPC.

Skip it when: You sand thick stock or large curves often; the 1/4 inch stroke and 1-1/2 inch top sleeve are the smallest here.

Warranty: The HA5932 manual gives two years from purchase or 500 hours of use, whichever comes first, for home use, and 90 days for professional or commercial use.

Check WEN HA5932 on Amazon

JET JBOS-5

Choose the JBOS-5 for the longest stroke here and a heavier machine. JET's manual lists a 14-1/2 inch square table that tilts 0 to 45 degrees down, 1,725 RPM, 30 oscillations per minute with a 1 inch stroke, an oscillation gear in a sealed oil bath, a 2 inch dust port and a switch with a removable safety key.

The manual lists a 1/2 HP, 110V TEFC induction motor rated 7.5A, 77 lb net weight and five spindles with 100-grit sleeves: 1/4, 1/2 and 5/8 inch by 6 inches, and 1-1/2 and 2 inches by 5-1/2 inches. JET's page lists 3 A for the motor, which differs from the manual. The page lists UPC 662755211492, which is among the Amazon listing UPCs.

Skip it when: You want a 3 inch sleeve (see the 6510T) or a sander you can carry (see the HA5932).

Warranty: JET's page lists five years. The JBOS-5 manual lists five years for woodworking machinery and two years for woodworking machinery used for industrial or commercial purposes.

Check JET JBOS-5 on Amazon

Manufacturer warranties

WEN 6510T and AT6535: two years for home use. WEN HA5932: two years or 500 hours for home use. JET JBOS-5: five years, two years for industrial or commercial use. Full conditions are in each model section.

Common buying questions

What is an oscillating spindle sander for?

WEN's 6510T manual calls spindle sanding the preferred way to remove material from inside curves and irregular edges. The spindle moves up and down as it rotates.

Which one sands bevels?

The WEN AT6535 table bevels 0 to 45 degrees and the JET JBOS-5 table tilts 0 to 45 degrees down. WEN's 6510T manual does not list a tilting table.

Which has the longest stroke?

JET lists a 1 inch stroke for the JBOS-5. WEN lists 5/8 inch for the 6510T and AT6535 and 1/4 inch for the HA5932.

What sleeve sizes come with them?

The 6510T includes 1/2 to 3 inches, the AT6535 1/2 to 2 inches, the HA5932 1/2 to 1-1/2 inches and the JBOS-5 1/4 to 2 inches.

Sources and buying checks

WEN's and JET's product pages, manuals and warranty terms supply the specifications and warranty details. These picks are built from the makers' published specs and manuals.

Check the exact model, what is in the box, seller and return notice before ordering, and read the manual's safety section before use. Product details can change.