As an Amazon Associate I earn from qualifying purchases. Our product guides include affiliate links to Amazon.
Trailer coupler locks: identify the part you want to secure
Master Lock 377DAT and CURT 23090 occupy the trailer coupler opening for parked storage. CURT 23521 instead locks a compatible latch using a 1/4-inch pin. These are different fit checks from a vehicle receiver’s hitch pin. Measure ball size, coupler shape or latch span first; no product here carries a tested guarantee that a trailer cannot be stolen.
Checked October 14, 2026 against the named brand Amazon listings and primary sources below. We compared published specs and fit limits; picks are built from the makers' published specs and manuals.
Parked coupler / published U-lock widthCURT 23090A ratcheting U-lock with a stated inside-width check.Check on Amazon
Compatible latch-pin formatCURT 23521A short pin for a latch with the matching hole and span.Check on Amazon
Check the fit before buying
Location
Parked coupler opening, coupler latch or vehicle receiver: identify the exact locking point.
Measurements
Nominal ball size and body clearance, or pin-hole diameter and required latch span.
Use plan
Parked versus coupled setup, current fitting directions and secure spare-key storage.
Follow the trailer/coupler instructions for towing and parking. Lock fit does not establish trailer capacity, correct hitch setup or a theft-proof storage arrangement.
The picks, and why
Parked coupler / named ball sizes: Master Lock 377DAT
Master Lock’s exact page says 377DAT fits 1-7/8-inch, 2-inch and most 2-5/16-inch couplers. Keep the word most: nominal ball size alone does not establish clearance around every coupler body or lip.
The listing identifies one lock and two keys. Check the specific coupler against the current fitting directions before choosing it for a trailer that remains uncoupled. We do not assign a measured picking, cutting, weather-life or theft-resistance score.
Exact model
377DAT
Maker size list
1-7/8, 2 and most 2-5/16 in
Selected package
1 lock / 2 keys
Watch for: Most 2-5/16-inch couplers is not every coupler shape.
Parked coupler / published U-lock width: CURT 23090
CURT describes 23090 as a coupler-opening lock for 1-7/8-, 2- and 2-5/16-inch couplers. It publishes a U-lock inside width of 3-7/8 inches, a ratchet locking system and two keys. This gives an additional physical measurement to compare with your coupler.
The orange finish makes the format visually distinct, but visibility is not a measured security result. Confirm the coupler body and surrounding hardware permit the lock base and U-bar to seat according to the instructions. Remove the opening-blocking lock before coupling for use.
Exact model
23090
Maker U-lock inside width
3-7/8 in
Format
Ratcheting U-lock / coupler opening
Watch for: Check coupler-body clearance as well as the nominal ball size.
CURT specifies a 1/4-inch pin and maximum 3/4-inch latch span for 23521. The maker describes padlock-style hardware with a quarter-turn lock activation and two keys. It secures a compatible latch rather than filling the coupler’s ball opening.
Measure the actual latch hole and required clear span, including washers or other surrounding parts. This pin is not the larger receiver pin used to retain a ball mount in the vehicle. It does not replace checking the coupler’s correct coupling procedure.
Exact model
23521
Pin diameter
1/4 in
Maximum latch span
3/4 in
Watch for: Latch-pin fit only; do not confuse it with a receiver lock.
Published details from the named brands; confirm the exact variant before ordering.
Pick
Choose it for
Check first
Master Lock 377DAT
Parked coupler / named ball sizes
Most 2-5/16-inch couplers is not every coupler shape.
CURT 23090
Parked coupler / published U-lock width
Check coupler-body clearance as well as the nominal ball size.
CURT 23521
Compatible latch-pin format
Latch-pin fit only; do not confuse it with a receiver lock.
Coupler, latch and receiver are different parts
The two opening locks fit into or around a parked trailer’s coupler. CURT’s short latch pin uses a separate hole and span. A receiver lock on the tow vehicle performs a different function and needs its own diameter and length checks.
Buy for the actual location you need to secure. A matching ball-size label is useful for the opening locks, but CURT’s U-lock width and Master Lock’s fits-most qualification show why coupler shape still matters.
Check operation and keep the spare separate
Both CURT selections and the checked Master Lock package describe two keys. Confirm that the lock seats, locks and releases on the actual coupler before relying on it for storage. Follow the maker’s instructions for placement and upkeep.
Keep a spare in a secure place you can reach if the main key is lost. We did not conduct forced-entry, corrosion or outdoor-exposure tests. Manufacturer security wording is not an insurance guarantee or a substitute for the owner’s wider storage plan.
Questions
Will any 2-5/16-inch coupler fit 377DAT?
Master Lock says most, so verify the exact coupler shape and current fitting instructions.
Can 23521 lock the vehicle receiver?
It is a 1/4-inch coupler-latch pin with a maximum 3/4-inch span. Receiver locks have different fit requirements.
Listing details and availability can change. Our recommendations are built from the makers' published specs and manuals. All three checked New offers were sold by Amazon.com. Recheck the selected variant, seller and stock status before ordering.