As an Amazon Associate I earn from qualifying purchases. Our product guides include affiliate links to Amazon.
Wood chipper buying guide
Wood chippers: branch size, power source and collection
Start with the thickest branches you need to chip. The WEN 41130 and LawnMaster FD1503 are 15 amp corded electric chipper shredders rated for branches up to 1-3/4 inches; the WEN catches chips in a rigid 13 gallon bin and the LawnMaster in a bag. The Westinghouse WChip3 is a 212cc gas chipper shredder rated for branches up to 3 inches, with a 137 lb weight to match.
Prepared October 17, 2026 from WEN's, LawnMaster's and Westinghouse's product pages, manuals and warranty terms, and the exact Amazon listings. These picks are built from the makers' published specs and manuals.
Choose by branch size and power
Measure the thickest branches in your usual pile and check how far your work area is from an outlet before choosing.
15 A, 3,700 RPM, branches up to 1-3/4 in. in the manual, about 12 gal collection bag, 22.7 lb; manual limits it to dry material (no green material or bamboo).
Two-year limited warranty for normal household use; 30 days for commercial, industrial or rental use.
212cc gas engine, recoil start, 3,600 RPM, branches up to 3 in., 26.4 gal bag in the manual (the Amazon listing says 24.6 gal), 137 lb.
Three-year limited warranty for personal use: parts for three years, repair labor for one.
Check branch size, power and weight
Branch diameter: WEN and LawnMaster's manuals rate their electric units for branches up to 1-3/4 inches (45 mm). Westinghouse rates the WChip3 for 3 inches (76 mm). LawnMaster's product page lists 1.8 inches for the FD1503; its manual says 1-3/4 inches.
Extension cord: The two electric models need an outlet within reach of where you chip. WEN's and LawnMaster's manuals each set extension cord requirements, and LawnMaster's calls for an outdoor-rated cord; check the exact model's manual against your outlet distance before choosing a corded machine.
Weight and fuel: Westinghouse lists 137 lb for the WChip3, plus 0.95 gallon of unleaded gasoline and 20.3 oz of SAE 10W-30 oil; it rolls on 12 inch pneumatic tires. WEN lists 25.8 lb for the 41130 and LawnMaster lists 22.7 lb for the FD1503.
What goes in: WEN's manual says not to shred soft, damp material such as kitchen waste. LawnMaster's FD1503 manual says it is for dry material only, never green material or bamboo, and not designed for leaves or vines. Check what you will feed in before choosing.
Exact models and buying options
WEN 41130
Choose the 41130 if you want chips to land in a rigid bin instead of a bag. WEN lists a 15 amp motor, two 7 inch blades at up to 8,000 cuts per minute, a hopper that takes branches up to 1.75 inches, an enclosed housing, two 7 inch wheels and a push stick with onboard storage. WEN says a safety mechanism prevents start-up while the hopper is open.
WEN's 41130 manual lists 120V AC, 15A, a 4,000 RPM no-load speed, a 1-3/4 inch (45 mm) maximum cutting diameter, a 13 gallon (50 L) bin, 25.8 lb and 22.1 x 17.5 x 36.8 inches. WEN's page lists SKU 41130 with barcode 044459411307, which matches the Amazon listing UPC.
Skip it when: You want the lightest electric unit here (see the LawnMaster) or regularly chip branches over 1-3/4 inches.
Warranty: WEN's warranty statement covers the original purchaser for two years from purchase or 500 hours of use, whichever comes first, for personal use; 90 days for professional or commercial use. The remedy is replacement of defective parts, and you need proof of purchase from a direct WEN vendor.
Choose the FD1503 for the lightest machine here. LawnMaster lists a 15 amp motor, a two-sided blade at 3,700 RPM, a 14:1 mulch ratio, 8 inch wheels, a push paddle, a blade changing tool and a collection bag. Its manual says it is designed for dry branches only, not for green material, bamboo, leaves or vines.
LawnMaster's FD1503 manual lists 120 V, 15 A, 3,700 RPM, a 1-3/4 inch (45 mm) maximum cutting diameter, an 11.89 gallon (45 L) bag and 22.7 lb. Its product page lists 1.8 inches and 12 gallons; the manual figures are the more conservative ones. The Amazon listing names model FD1503.
Skip it when: You need to chip fresh green branches, leaves or vines; LawnMaster's FD1503 manual limits it to dry material and excludes green material and bamboo. Also skip it if you prefer a rigid bin or chip branches over 1-3/4 inches.
Warranty: LawnMaster's manual and warranty page give two years against defects in workmanship and materials under normal household use, and 30 days for commercial, industrial or rental use. Keep your receipt. Normal wear and routine maintenance such as blade sharpening are not covered, and you pay transportation charges unless LawnMaster requests the return in writing.
Choose the WChip3 for limbs the electric units cannot take, or for work far from an outlet. Westinghouse lists a 212cc OHV four-stroke engine with direct drive, a chute for branches up to 3 inches with dual chipper blades, a top hopper with four shredder hammers for twigs and leaves, a 15:1 reduction ratio, locking 12 inch pneumatic wheels and a bag with a bottom zipper.
The WChip3 manual lists a 3,600 RPM no-load speed, a 3 inch (76 mm) maximum cutting diameter, 137 lb (62.1 kg), a 0.95 gallon fuel tank for unleaded gasoline, 20.3 oz of SAE 10W-30 oil, recoil start and a 26.4 gallon (100 L) bag; Westinghouse's page says 26 gallons, while the Amazon listing says 24.6 gallons, so confirm the bag supplied. Westinghouse's page lists barcode 850060639968, which matches the Amazon listing UPC.
Skip it when: Your branches stay under 1-3/4 inches and you do not want to store fuel and oil or move a 137 lb machine.
Warranty: Westinghouse's three-year limited warranty for non-generator gas products covers the original purchaser with proof of purchase for personal use: replacement parts for three years and repair labor for one year. It does not cover commercial or rental use, and you deliver or ship the unit to a service provider at your expense.
WEN 41130: two years or 500 hours of home use, whichever comes first, parts replacement. LawnMaster FD1503: two years for normal household use. Westinghouse WChip3: three years on parts and one year on repair labor for personal use. Full conditions are in each model section.
Common buying questions
How thick a branch can an electric wood chipper handle?
WEN and LawnMaster's manuals rate the 41130 and FD1503 for branches up to 1-3/4 inches. Westinghouse rates its gas WChip3 for 3 inches.
Do I need a special extension cord?
For the electric models, use a cord that meets the exact model's manual requirements. LawnMaster's FD1503 manual calls for an outdoor-rated cord, and WEN's 41130 manual sets its own cord requirements.
What can I feed into these chippers?
Branches and yard debris within each model's size limit. WEN's manual says not to shred soft, damp material such as kitchen waste, and LawnMaster's FD1503 manual limits it to dry material, excluding green material, bamboo, leaves and vines.
What does the gas model need?
Westinghouse's manual lists unleaded gasoline (0.95 gallon tank) and 20.3 oz of SAE 10W-30 oil, with recoil start.
Hedge trimmers: for trimming the hedges; check each chipper's material limits before feeding in clippings.
Sources and buying checks
WEN's, LawnMaster's and Westinghouse's product pages, manuals and warranty terms supply the specifications and warranty details. These picks are built from the makers' published specs and manuals.
WEN: 41130 Electric Wood Chipper and Shredder (wenproducts.com), 41130 manual (cdn.shopify.com).
LawnMaster: FD1503 Electric Wood Chipper Shredder (lawnmaster.com), FD1503 operator's manual (cdn.shopify.com), LawnMaster warranty information (lawnmaster.com).
Westinghouse: WChip3 Gas 3" Wood Chipper/Shredder/Mulcher (westinghouseoutdoorpower.com), WChip3 owner's manual (cdn.westinghouseoutdoorpower.com), Three-year limited warranty for non-generator gas products (cdn.westinghouseoutdoorpower.com).
Check the exact model, seller and return notice before ordering, and read the manual's safety section before use. Product details can change.