Midea MAP10HS1XWT-A Smart Portable Air Conditioner with Heat

Cooling, dehumidifying and heat-pump heating in a single-hose unit

The listing sells model MAP10HS1XWT-A, and the listing's manual names it on the cover beside two other model numbers. Midea's store page covers MAP10HS1XWT without the suffix and describes it as a 4-in-1 unit that cools, dehumidifies, ventilates and heats, in white, with a reusable washable filter. That page also says the product is no longer available from Midea's own store.

Capacity is labelled differently by each source. The Amazon title and bullets say 14,000 BTU ASHRAE with 10,000 BTU SACC; the details table also lists a cooling power of 13,500 BTU. Midea's page names it a 10,000 BTU DOE unit for spaces up to 450 square feet. The manual carries a note on the DOE test procedure but gives no capacity rating for this model in the pages we read.

Heating comes from a heat pump. The manual's operating table gives a room range of 41 to 86 degrees Fahrenheit for heat-pump mode, and the listing repeats that range. It is a single-hose unit: the listing names a single flexible duct about five feet long and five inches across.

Three feet from bedding, curtains and furniture

The manual asks that the unit stay at least three feet (1 m) away from combustible materials such as bedding, curtains and furniture. Its installation page adds at least 12 inches (30 cm) from the nearest wall and at least 19.7 inches (50 cm) of clear space in front of the air outlet. It also asks for nothing within about 500 mm of the exhaust hose's outlet.

Power rules are strict. Use a grounded outlet protected by a fuse or breaker sized to the nameplate current, do not change the cord's length or use an extension cord, and do not share a single outlet with other appliances.

It is not for wet rooms or places exposed to combustible gas, and the wheels should not be used on thick carpet. The manual recommends operating it in rooms below 95 degrees Fahrenheit and says to cut power during a thunderstorm.

The window kit, tools and a 30-minute install

The manual says the window kit fits openings from 19.4 to 62.2 inches and can be shortened for smaller windows; the listing repeats 19.4 to 62.2 inches. The accessories list includes the exhaust hose, a drain hose, window sliders, three bolts, a security bracket with two screws, foam seals and a unit adaptor, with some items marked as fitted on some models only.

The listing says no extra tools are needed. The manual's installation overview lists a screwdriver and wrench, tape measure, scissors or knife, a pencil, and on some models a saw for shortening the window adapter. It estimates the installation at about 30 minutes and says help from a second person is advisable.

The listing gives the unit as 13.74 by 17.44 by 28.66 inches, which Midea's page repeats, and 71.4 pounds; Midea's page says 69.73 pounds.

Modes, thermostat range and the remote

The panel cycles Auto, Cool, Dry and Fan, plus Heat on this model. The manual's set range is 60 to 86 degrees Fahrenheit, with 88 mentioned as an alternative upper limit; the listing's description says 62 to 90 degrees. The manual's operating range is 60 to 95 degrees for Cool and 55 to 95 for Dry.

Dry mode fixes the fan at low. Continuous fan is available in Cool and Dry. Sleep mode moves the set point by 2 degrees Fahrenheit after 30 minutes and another 2 after a further 30, then holds for seven hours. The timer schedules an automatic on or off time from 0 to 24 hours.

ComfortSense works from the remote within 26 feet, updating every three minutes, and the manual says it does not work in Fan or Dry. The manual also covers the SmartHome app and Matter pairing with Alexa, Google Home and Apple Home, and notes those apps may show a temperature one degree different from the unit's display.

Two drain ports, and a hose the manual says is not included

In Dehumidify mode the manual drains from the upper port on the back; in heat-pump mode it drains from the lower port. For both, it describes a drain connector that takes a 3/4-inch hose, which it says is not included, and says the hose must sit lower than the tray outlet. The accessories page does list a drain hose, and the listing says a drain hose is included, so check which hose is in your box.

When the tray fills, the manual says the unit beeps eight times and shows P1 while the fan continues to run. Its drainage pages cover emptying the tray, and the P1 code is listed with the other display codes.

The manual's display codes include EH60, EH61, EC52, EH0b and, on some models, ELOC, alongside P1. The manual lists low refrigerant as a possible cause of weak cooling that needs a technician.

Filter washing every two weeks and the warranty

The manual asks for the air filter to be cleaned every two weeks, following its washing and drying instructions, and says never to run the unit without it. For storage, it describes running the unit on Fan for 12 hours, then storing it somewhere cool and dark with the remote's batteries removed.

The warranty is one year from the date of delivery or purchase, whichever is later, with Midea or an authorised servicer covering defective parts and repair. You pay for diagnostics, removal, transport and reinstallation, and commercial, business or rental use is excluded. The listing's warranty field also states one year; keep the bill of sale or delivery slip.