As an Amazon Associate I earn from qualifying purchases.
Sliding miter saw guides: 4 models, one plain row each
Each row says who the model suits, its main strength and its main catch, taken from each guide's listed sources. Open a guide to confirm the exact model and what's included before you buy on Amazon.
| Product | Best for | Main strength | Main caveat |
|---|---|---|---|
| DEWALT DCS785B 20V MAX XR 12 in. Double-Bevel Sliding Miter Saw (Tool Only) | A 12 in. slider for DEWALT 20V MAX or FLEXVOLT battery owners working away from outlets | Runs on DEWALT 20V MAX and FLEXVOLT batteries | Battery and charger are extra; DEWALT suggests 8Ah or larger |
| DEWALT DWS780 12 in. Double-Bevel Sliding Compound Miter Saw | Wide crosscuts and tall trim with a corded 12 in. slider and a shadow-line light | Miters to 60 degrees right with 10 positive stops | Corded; the manual asks for at least a 15 ampere breaker |
| Makita LS1219L 12 in. Dual-Bevel Sliding Compound Miter Saw with Laser | Wide 15 in. crosscuts and work close to a wall, with a laser cut line | 15 in. crosscut at 90 degrees, per Makita | 8 in. crown and 6-3/4 in. base need optional accessories |
| SKIL MS6305-00 15 Amp 10 in. Dual-Bevel Sliding Miter Saw | A 10 in. dual-bevel slider for 2x12 crosscuts and base trim up to 4-1/2 in. | Cuts a 2x12 at 90 degrees from a 10 in. blade | Three-year warranty only if registered within 30 days |
What to check before buying
These sliding miter saw guides set each saw's crosscut, miter and bevel figures from its maker's manual beside the trim capacities on its maker's page, and note where the two disagree or where a figure depends on an accessory sold separately.
- Crosscut width. The manuals give 13.75 in. for the DWS780 and 13.5 in. for the cordless DCS785 at 0 degrees miter, and Makita lists 15 in. for the LS1219L. The 10 in. SKIL MS6305-00 is rated for a 2x12.
- Trim height and add-ons. Makita's 8 in. crown and 6-3/4 in. base figures assume its optional crown molding stopper and horizontal vise. DEWALT lists 7-1/2 in. nested crown for the DWS780 and 6-1/2 in. for the DCS785; SKIL lists 4-1/2 in. base.
- Miter and bevel range. Both DEWALT saws miter 60 degrees right and 50 left and bevel 49 each way. Makita miters 60 both ways and bevels 48; SKIL miters 50 both ways and bevels 48 left and 45 right.
- Cord or battery. The DCS785B is sold as a bare tool, and DEWALT recommends 8Ah or larger 20V MAX or FLEXVOLT batteries. The DWS780, LS1219L and MS6305-00 are 15 amp corded saws.
- Warranty terms. DEWALT gives three years plus one year of free service. SKIL gives three years only if you register within 30 days, and Makita's site gives this corded saw its one-year general term.
This page collects 4 sliding miter saw guides from Plain Buy Guides. Each guide covers one exact Amazon listing: the maker's published specifications, what the listing says is included, the fit and installation limits that decide whether it suits you, and the main caveat, with every source listed and dated. Nothing here is based on hands-on testing, and no guide promises a price or stock level.
In the table above, the Best for column says who each model suits, and the strength and caveat columns carry the first point each guide makes. Open a guide before buying to confirm the exact model, the included parts and any conflict between the listing and the maker's documents, which each guide reports rather than settles. Side-by-side pages put the published facts of two models from this category in one place.
- DEWALT DCS785B 20V MAX XR 12 in. Double-Bevel Sliding Miter Saw (Tool Only)
DEWALT's DCS785B is a 20V MAX XR 12 in. double-bevel sliding miter saw sold as the bare tool. Battery and charger are extra, and DEWALT suggests 8Ah or larger packs.
- DEWALT DWS780 12 in. Double-Bevel Sliding Compound Miter Saw
DEWALT's DWS780 is a corded 15 amp, 12 in. double-bevel sliding miter saw. The manual gives a 13.75 in. crosscut, and an LED shadow light marks the cut line.
- Makita LS1219L 12 in. Dual-Bevel Sliding Compound Miter Saw with Laser
Makita's LS1219L is a 15 amp, 12 in. dual-bevel sliding miter saw with a laser. It crosscuts 15 in. at 90 degrees; its 8 in. crown figure needs a stopper set.
- SKIL MS6305-00 15 Amp 10 in. Dual-Bevel Sliding Miter Saw
SKIL's MS6305-00 is a 15 amp, 10 in. dual-bevel sliding miter saw that crosscuts a 2x12 at 90 degrees. Its three-year warranty needs registration within 30 days.