As an Amazon Associate I earn from qualifying purchases.
Jobsite table saw guides: 3 models, one plain row each
Each row says who the model suits, its main strength and its main catch, taken from each guide's listed sources. Open a guide to confirm the exact model and what's included before you buy on Amazon.
| Product | Best for | Main strength | Main caveat |
|---|---|---|---|
| DEWALT DWE7491RS 10 in. Jobsite Table Saw with Rolling Stand | Ripping sheet goods and wide stock on a jobsite saw that rolls on its own stand | 32-1/2 in. rip capacity with a two-position fence | The dado insert is an accessory, not in DEWALT's box list |
| DEWALT DWE7485 8-1/4 in. Compact Jobsite Table Saw | A compact jobsite saw for ripping sheet goods, mounted on a stand or bench you supply | 24.5 in. of rip in a compact saw | No stand in the box; the manual says it must be mounted |
| SKIL TS6307-00 15 Amp 10 in. Jobsite Table Saw with Folding Stand | A 10 in. jobsite saw with a built-in folding stand and a 3-1/2 in. depth of cut | Folding stand is built in | Three-year warranty only if registered within 30 days |
What to check before buying
These jobsite table saw guides compare rip capacity, depth of cut and what each maker puts in the box, then check the manual for what the saw is not meant to do, such as dado sets, and how the warranty is earned.
- Rip capacity. DEWALT's DWE7491RS rips 32-1/2 in. to the right, SKIL's TS6307-00 rips 25.5 in. and DEWALT's compact DWE7485 rips 24.5 in.
- Stand in the box. The DWE7491RS comes with a rolling stand and the SKIL has a folding stand built in. The DWE7485 has no stand, and its manual says it must be mounted on a stand or bench.
- Dado sets. The DWE7485 manual says not to use dado sets. The DWE7491 manual allows 8 in. stacks up to 13/16 in. with an accessory insert, and SKIL allows 8 in. sets up to 5/8 in. wide.
- Blade size and depth. The 10 in. saws cut 3-1/8 in. (DEWALT) and 3-1/2 in. (SKIL) deep at 90 degrees; the 8-1/4 in. DWE7485 cuts 2-9/16 in.
- How the warranty is earned. SKIL gives three years only if you register within 30 days, otherwise one year. DEWALT gives three years plus a year of free service on both of its saws.
This page collects 3 jobsite table saw guides from Plain Buy Guides. Each guide covers one exact Amazon listing: the maker's published specifications, what the listing says is included, the fit and installation limits that decide whether it suits you, and the main caveat, with every source listed and dated. Nothing here is based on hands-on testing, and no guide promises a price or stock level.
In the table above, the Best for column says who each model suits, and the strength and caveat columns carry the first point each guide makes. Open a guide before buying to confirm the exact model, the included parts and any conflict between the listing and the maker's documents, which each guide reports rather than settles. Side-by-side pages put the published facts of two models from this category in one place.
- DEWALT DWE7491RS 10 in. Jobsite Table Saw with Rolling Stand
DEWALT's DWE7491RS is a 10 in., 15 amp jobsite table saw with a rolling stand and 32-1/2 in. of rip. Its manual allows 8 in. dado stacks with an accessory insert.
- DEWALT DWE7485 8-1/4 in. Compact Jobsite Table Saw
DEWALT's DWE7485 is a compact 8-1/4 in., 15 amp table saw with 24.5 in. of rip. It ships without a stand, and its manual says not to use dado sets on it.
- SKIL TS6307-00 15 Amp 10 in. Jobsite Table Saw with Folding Stand
SKIL's TS6307-00 is a 10 in., 15 amp jobsite table saw with a built-in folding stand and 25.5 in. of rip. Its three-year warranty needs registration within 30 days.