Bambu Lab A1 FDM 3D Printer (model PF002-A) vs Bambu Lab A1 mini 3D Printer with LED Lamp Kit
These are side-by-side facts taken from each product guide: published specifications, strengths and caveats as their sources state them. This page is not a test, a ranking or a verdict about which model is better.
Bambu Lab A1 FDM 3D Printer (model PF002-A)
PLA, PETG and TPU on a desk with room for the bed to swing
An open-frame bed-slinger with a 256 mm cube build volume, a 300C hotend, a 100C bed and a full set of automatic calibration routines including 49-point bed probing and flow dynamics calibration. This ASIN is the printer alone: AMS lite for multi-colour is a separate purchase and caps at four colours.
Published specifications
- Maker: 256 x 256 x 256 mm build volume; Cartesian bed-slinger
- Maker: 300C max hotend, 100C max heatbed; 0.4 mm stainless nozzle
- Maker: PLA, PETG, TPU and supports; ABS and ASA discouraged
- Maker: about 48 dB in silent mode; 5 W idle, 95 W average on PLA
- Maker: microSD required to print; 32 GB card pre-installed
- Listing: 21.76 x 20.83 x 12.87 in; maker asks ~695 mm bed travel space
Strengths
- Auto bed levelling probes 49 points and runs before every job
- LAN Only Mode is documented for A series printers by the maker
- Integrated hotend, belt tension monitoring and wiper are user-serviceable
Caveats
- Multi-colour needs AMS lite, which is not in this box and caps at four
- Maker discourages ABS and ASA and says not to enclose the printer
- No internal storage: without a microSD card you cannot start a print
Read the full Bambu Lab A1 FDM 3D Printer (model PF002-A) guide
Bambu Lab A1 mini 3D Printer with LED Lamp Kit
Small PLA, PETG and TPU prints on a desk with limited space
A compact open-frame printer with a 180 mm cube build volume, a 300C hotend and an 80C bed, which is what limits it to PLA, PETG, TPU and their supports. It can print entirely offline from its microSD card, but it has no internal memory, and AMS lite for multi-colour is a separate purchase capped at four colours.
Published specifications
- Maker: 180 x 180 x 180 mm build volume; heatbed is the Y axis
- Maker: 300C max hotend but only 80C max heatbed
- Maker: PLA, PETG, TPU and supports; ABS, ASA, PC, PA, PET not advised
- Maker: about 48 dB silent mode; 6 W idle, 57 W average printing
- Maker: microSD required to print; 32 GB card pre-installed
- Listing: 15.21 x 16.77 x 17.94 in; maker asks ~390 mm bed travel space
Strengths
- Maker confirms it can print with no internet at all, from microSD
- Textured PEI plate included and takes PLA, PETG and TPU without glue
- Five-point pre-check decides whether a full re-level is needed
Caveats
- 80C bed rules out ABS, ASA, PC, PA and PET per the maker
- Listing model number PF002-M-EU differs from PF002-M on its own guide
- AMS lite is not included and the printer supports only one, so four colours
Read the full Bambu Lab A1 mini 3D Printer with LED Lamp Kit guide
How to choose between them
Choose the Bambu Lab A1 FDM 3D Printer (model PF002-A) if your situation matches: PLA, PETG and TPU on a desk with room for the bed to swing. Its main caveat: Multi-colour needs AMS lite, which is not in this box and caps at four.
Choose the Bambu Lab A1 mini 3D Printer with LED Lamp Kit if your situation matches: Small PLA, PETG and TPU prints on a desk with limited space. Its main caveat: 80C bed rules out ABS, ASA, PC, PA and PET per the maker.
Both entries repeat what each guide records. Confirm the model, included parts and availability on the current listing before ordering.
Primary sources
- Bambu Lab wiki: A1 FAQ, including product specifications Source for Bambu Lab A1 FDM 3D Printer (model PF002-A)
- Bambu Lab wiki: A1 introduction, motion system and calibration Source for Bambu Lab A1 FDM 3D Printer (model PF002-A)
- Bambu Lab wiki: how to enable LAN Mode, including A series printers Source for Bambu Lab A1 FDM 3D Printer (model PF002-A) and Bambu Lab A1 mini 3D Printer with LED Lamp Kit
- Listing-supplied Bambu Lab A1 Quick Start, model PF002-A Source for Bambu Lab A1 FDM 3D Printer (model PF002-A)
- Bambu Lab wiki: A1 mini FAQ, including product specifications Source for Bambu Lab A1 mini 3D Printer with LED Lamp Kit
- Listing-supplied Bambu Lab A1 mini Quick Start, model PF002-M Source for Bambu Lab A1 mini 3D Printer with LED Lamp Kit
Primary sources checked .