Bambu Lab A1 FDM 3D Printer (model PF002-A) vs Creality Ender-3 V3 SE FDM 3D Printer
These are side-by-side facts taken from each product guide: published specifications, strengths and caveats as their sources state them. This page is not a test, a ranking or a verdict about which model is better.
Bambu Lab A1 FDM 3D Printer (model PF002-A)
PLA, PETG and TPU on a desk with room for the bed to swing
An open-frame bed-slinger with a 256 mm cube build volume, a 300C hotend, a 100C bed and a full set of automatic calibration routines including 49-point bed probing and flow dynamics calibration. This ASIN is the printer alone: AMS lite for multi-colour is a separate purchase and caps at four colours.
Published specifications
- Maker: 256 x 256 x 256 mm build volume; Cartesian bed-slinger
- Maker: 300C max hotend, 100C max heatbed; 0.4 mm stainless nozzle
- Maker: PLA, PETG, TPU and supports; ABS and ASA discouraged
- Maker: about 48 dB in silent mode; 5 W idle, 95 W average on PLA
- Maker: microSD required to print; 32 GB card pre-installed
- Listing: 21.76 x 20.83 x 12.87 in; maker asks ~695 mm bed travel space
Strengths
- Auto bed levelling probes 49 points and runs before every job
- LAN Only Mode is documented for A series printers by the maker
- Integrated hotend, belt tension monitoring and wiper are user-serviceable
Caveats
- Multi-colour needs AMS lite, which is not in this box and caps at four
- Maker discourages ABS and ASA and says not to enclose the printer
- No internal storage: without a microSD card you cannot start a print
Read the full Bambu Lab A1 FDM 3D Printer (model PF002-A) guide
Creality Ender-3 V3 SE FDM 3D Printer
PLA, PETG and soft TPU printed from a memory card
An open-frame FDM printer with a 220 by 220 by 250 mm build volume, CR-Touch auto levelling, an automatic Z offset and a Sprite direct extruder that handles 95A TPU. Creality's parameter table caps the nozzle at 260C and lists storage-card printing as the only printing method, with no network connection named.
Published specifications
- Maker: 220 x 220 x 250 mm build volume; single 0.4 mm nozzle
- Maker: 260C max nozzle, 100C max hotbed, 5-35C ambient range
- Maker: 180 mm/s typical speed, 250 mm/s max, 2500 mm/s2 acceleration
- Maker: PLA, PETG and TPU 95A; layer 0.1-0.35 mm, +/-0.1 mm precision
- Maker: 350 W rated; 100-120V or 200-240V; power loss recovery yes
- Maker: storage card printing; STL, OBJ, AMF; Creality Print or Cura
Strengths
- CR-Touch levelling plus an automatic Z offset with no paper test
- Direct-drive Sprite extruder is rated for flexible 95A TPU
- No account, cloud service or internet is documented as needed to print
Caveats
- Maker lists only PLA, PETG and TPU 95A; 260C nozzle cap
- Maker's parameter table lists no network, Wi-Fi or cloud printing
- Creality's own download page labels this manual as a different model
How to choose between them
Choose the Bambu Lab A1 FDM 3D Printer (model PF002-A) if your situation matches: PLA, PETG and TPU on a desk with room for the bed to swing. Its main caveat: Multi-colour needs AMS lite, which is not in this box and caps at four.
Choose the Creality Ender-3 V3 SE FDM 3D Printer if your situation matches: PLA, PETG and soft TPU printed from a memory card. Its main caveat: Maker lists only PLA, PETG and TPU 95A; 260C nozzle cap.
Both entries repeat what each guide records. Confirm the model, included parts and availability on the current listing before ordering.
Primary sources
- Bambu Lab wiki: A1 FAQ, including product specifications Source for Bambu Lab A1 FDM 3D Printer (model PF002-A)
- Bambu Lab wiki: A1 introduction, motion system and calibration Source for Bambu Lab A1 FDM 3D Printer (model PF002-A)
- Bambu Lab wiki: how to enable LAN Mode, including A series printers Source for Bambu Lab A1 FDM 3D Printer (model PF002-A)
- Listing-supplied Bambu Lab A1 Quick Start, model PF002-A Source for Bambu Lab A1 FDM 3D Printer (model PF002-A)
- Creality product page for the Ender-3 V3 SE Source for Creality Ender-3 V3 SE FDM 3D Printer
- Creality download centre page for the Ender-3 V3 SE Source for Creality Ender-3 V3 SE FDM 3D Printer
- Creality user manual V1.0 offered on that page, covering the Ender-3 V3 SE Source for Creality Ender-3 V3 SE FDM 3D Printer
Primary sources checked .