Fits the Bed product guide
Creality Ender-3 V3 SE FDM 3D Printer
PLA, PETG and soft TPU printed from a memory card
An open-frame FDM printer with a 220 by 220 by 250 mm build volume, CR-Touch auto levelling, an automatic Z offset and a Sprite direct extruder that handles 95A TPU. Creality's parameter table caps the nozzle at 260C and lists storage-card printing as the only printing method, with no network connection named.
Listing checked . Confirm the model, included parts and availability before ordering.
Published specifications
- Maker: 220 x 220 x 250 mm build volume; single 0.4 mm nozzle
- Maker: 260C max nozzle, 100C max hotbed, 5-35C ambient range
- Maker: 180 mm/s typical speed, 250 mm/s max, 2500 mm/s2 acceleration
- Maker: PLA, PETG and TPU 95A; layer 0.1-0.35 mm, +/-0.1 mm precision
- Maker: 350 W rated; 100-120V or 200-240V; power loss recovery yes
- Maker: storage card printing; STL, OBJ, AMF; Creality Print or Cura
Fit and limits
Strengths
- CR-Touch levelling plus an automatic Z offset with no paper test
- Direct-drive Sprite extruder is rated for flexible 95A TPU
- No account, cloud service or internet is documented as needed to print
Caveats
- Maker lists only PLA, PETG and TPU 95A; 260C nozzle cap
- Maker's parameter table lists no network, Wi-Fi or cloud printing
- Creality's own download page labels this manual as a different model
The numbers from Creality's own parameter table
The manual's Equipment Parameters page is the cleanest source here and it names the model as Ender-3 V3 SE. Modelling dimensions are 220 by 220 by 250 millimetres, which matches the 8.66 by 8.66 by 9.84 inch figure in the Amazon title. It is a single-nozzle FDM machine with a 0.4 mm nozzle as standard.
Layer thickness runs from 0.1 to 0.35 millimetres with a stated precision of plus or minus 0.1 millimetres. Nozzle temperature is capped at 260 degrees Celsius and the hotbed at 100 degrees. Recommended ambient temperature is 5 to 35 degrees Celsius, which is the range Creality publishes for this model.
Rated power is 350 watts, and the input accepts 100 to 120 volts or 200 to 240 volts at 50 or 60 Hz. Power loss recovery is listed as yes, so an interrupted print can be resumed. Amazon's table gives the machine as 13.9 by 13.9 by 18.9 inches and 15.66 pounds, and the bed slides on the Y axis, so leave clear space front and back.
Two speed numbers, and the one to plan around
The Amazon title leads with 250 mm/s and 2500 mm/s squared acceleration. Creality's own parameter table gives both: a typical printing speed of 180 mm/s and a maximum printing speed of 250 mm/s, with acceleration of 2500 mm/s squared. The typical figure is the one to plan jobs around, because it is the maker's own working number rather than the ceiling.
The listing also claims the speed saves 73 percent of the time compared with other printers. It does not name which printers, which settings or which model file produced that comparison, so we are not repeating it as a fact. Treat it as an unsupported comparative claim.
Creality's page attributes the stability to a rigid dual Z-axis that reduces Z wobbling and a Y axis running on a pair of 8 mm linear shafts described as strong and wear-proof steel. Those are structural claims rather than measured ones, but they do describe the actual hardware you are buying.
What it prints, and what the 260 degree cap rules out
The parameter table lists the filaments as PLA, TPU at 95A hardness, and PETG. Creality's product page says the Sprite direct extruder works well with PLA, PETG and flexible TPU. The parameter table lists no other materials, so do not plan on ABS, ASA, PC or nylon with this machine.
Creality's page credits the direct-drive Sprite extruder with handling flexible TPU, and its parameter table names 95A as the hardness it supports. Creality's page adds a maker claim that over 500,000 Sprite extruders had shipped worldwide as of June 2023, which is a dated statement about the extruder family rather than about this printer.
The manual's safety page asks you to use filament recommended by the manufacturer and warns that other filament may clog the nozzle or damage the printer. Neither the product page nor the manual describes any multi-colour or multi-material system for this model, so plan on one filament at a time.
Levelling, loading and the assembly you actually do
The parameter table lists the levelling method as auto-levelling with CR-Touch. Creality's page pairs that with a strain sensor that sets the Z offset automatically, and says you do not need to turn screws or pull a sheet of paper through the gap. Those two systems together are what the parameter table calls auto-levelling.
Filament handling is menu-driven. Tapping Extrude pushes filament out of the nozzle and tapping Retract pulls it back, so a filament change is a menu operation. The interface uses motion graphics to show the levelling process and other parameters on screen.
Assembly is partial, not zero. The manual's contents give seven pages to the assembly procedure, covering the gantry frame, the display screen, the material rack, the equipment wiring and filament loading. The listing and the product page both claim roughly 20 minutes from unboxing to first print, so set aside an evening the first time rather than ten minutes.
How you get files to it, and what is not listed
This is the detail worth settling before you buy. The manual's parameter table lists the printing method as storage card printing, and lists no Wi-Fi, no Ethernet and no cloud service. Accepted file formats are STL, OBJ and AMF, and the named slicers are Creality Print, Cura, Repetier-Host and Simplify3D on Windows, macOS or Linux.
Creality Print is named in the manual as one of the supported slicers. Nothing we read states that the Ender-3 V3 SE itself has a network connection, so ask Creality directly if remote monitoring or network printing is a requirement for you.
The upside of a card-based workflow is that no account, cloud service or internet connection is documented as necessary to print. The downside is carrying a card back and forth between the computer and the printer for every job.
A mislabelled download, siting rules and what is not published
Creality's own download page for the Ender-3 V3 SE lists exactly one user manual and labels it Ender-3 V3 KE User Manual, dated August 2023. The file behind that link is version 1.0 of the Ender-3 V3 SE manual and its parameter table names the Ender-3 V3 SE. We are reporting what each page says rather than guessing why they differ; if you download it, check the model name on the cover before following it.
The manual's Instructions for Use page asks for a ventilated, cool and low-dust environment, away from flammable or explosive materials and high heat, and not on a vibrating or unstable surface. It requires the supplied power cord in a grounded three-pin socket, and warns not to touch the nozzle or hotbed during operation or to wear gloves or loose accessories while operating it.
Two things are absent from everything we read. Creality publishes no operating noise figure for this model, so we cannot tell you how loud it is. And no warranty document was read: the listing states 12 months of after-sales service, while the manual simply points to the Creality website for warranty information, so confirm the terms before buying.
Check the current listing
Confirm the model, included parts and availability before ordering.
Primary sources
- Creality product page for the Ender-3 V3 SE
- Creality download centre page for the Ender-3 V3 SE
- Creality user manual V1.0 offered on that page, covering the Ender-3 V3 SE
Primary sources checked .
Compare with
- Flashforge Adventurer 5M CoreXY 3D Printer
PLA, PETG and TPU on a network, in a ventilated room
- Bambu Lab P1S Enclosed CoreXY 3D Printer
ABS and ASA work that needs an enclosure and a carbon filter
- Bambu Lab A1 mini Combo with AMS lite (PF002-M and SA005)
Four-colour PLA and PETG prints inside a 180 mm cube
- Bambu Lab A1 FDM 3D Printer (model PF002-A)
PLA, PETG and TPU on a desk with room for the bed to swing
- ELEGOO Centauri Carbon Enclosed CoreXY 3D Printer
High-temperature filament on a home network, no cloud account
- Bambu Lab A1 mini 3D Printer with LED Lamp Kit
Small PLA, PETG and TPU prints on a desk with limited space
Side-by-side pages, this model next to: Bambu Lab A1 FDM 3D Printer (model PF002-A), ELEGOO Centauri Carbon Enclosed CoreXY 3D Printer, Bambu Lab A1 mini Combo with AMS lite (PF002-M and SA005), Bambu Lab A1 mini 3D Printer with LED Lamp Kit.