Creality Ender-3 V3 SE FDM 3D Printer vs ELEGOO Centauri Carbon Enclosed CoreXY 3D Printer
These are side-by-side facts taken from each product guide: published specifications, strengths and caveats as their sources state them. This page is not a test, a ranking or a verdict about which model is better.
Creality Ender-3 V3 SE FDM 3D Printer
PLA, PETG and soft TPU printed from a memory card
An open-frame FDM printer with a 220 by 220 by 250 mm build volume, CR-Touch auto levelling, an automatic Z offset and a Sprite direct extruder that handles 95A TPU. Creality's parameter table caps the nozzle at 260C and lists storage-card printing as the only printing method, with no network connection named.
Published specifications
- Maker: 220 x 220 x 250 mm build volume; single 0.4 mm nozzle
- Maker: 260C max nozzle, 100C max hotbed, 5-35C ambient range
- Maker: 180 mm/s typical speed, 250 mm/s max, 2500 mm/s2 acceleration
- Maker: PLA, PETG and TPU 95A; layer 0.1-0.35 mm, +/-0.1 mm precision
- Maker: 350 W rated; 100-120V or 200-240V; power loss recovery yes
- Maker: storage card printing; STL, OBJ, AMF; Creality Print or Cura
Strengths
- CR-Touch levelling plus an automatic Z offset with no paper test
- Direct-drive Sprite extruder is rated for flexible 95A TPU
- No account, cloud service or internet is documented as needed to print
Caveats
- Maker lists only PLA, PETG and TPU 95A; 260C nozzle cap
- Maker's parameter table lists no network, Wi-Fi or cloud printing
- Creality's own download page labels this manual as a different model
ELEGOO Centauri Carbon Enclosed CoreXY 3D Printer
High-temperature filament on a home network, no cloud account
An enclosed CoreXY printer with a 256 mm cube build volume, a 320C nozzle and a 110C bed, with a built-in chamber camera and browser-based network printing that needs no account. Two things to read first: rated power is 350 watts on 110 volt mains, and the hot end and build plate carry no warranty.
Published specifications
- Maker: 256 x 256 x 256 mm build; 320C nozzle, 110C heated bed
- Maker: print speed 500 mm/s or less; +/-0.1 mm precision; 0.4 mm nozzle
- Maker: rated 1100 W at 220 V but 350 W at 110 V; 100-240 V input
- Maker: 398 x 404 x 490 mm, 17.5 kg; ambient 5-40C
- Maker: USB drive and Wi-Fi; browser interface at the printer's IP
- Maker: 12-month warranty on unlisted parts; hot end and plate excluded
Strengths
- Network printing and monitoring run in a browser with no account
- Chamber camera, air filter and auxiliary cooling fan are built in
- Maker publishes a part-by-part warranty table naming this series
Caveats
- Rated power drops to 350 watts on a 110 volt supply
- Hot end, nozzle kit, build plate and PTFE tube carry no warranty
- Glass top cover must be removed for PLA and flexible filaments
Read the full ELEGOO Centauri Carbon Enclosed CoreXY 3D Printer guide
How to choose between them
Choose the Creality Ender-3 V3 SE FDM 3D Printer if your situation matches: PLA, PETG and soft TPU printed from a memory card. Its main caveat: Maker lists only PLA, PETG and TPU 95A; 260C nozzle cap.
Choose the ELEGOO Centauri Carbon Enclosed CoreXY 3D Printer if your situation matches: High-temperature filament on a home network, no cloud account. Its main caveat: Rated power drops to 350 watts on a 110 volt supply.
Both entries repeat what each guide records. Confirm the model, included parts and availability on the current listing before ordering.
Primary sources
- Creality product page for the Ender-3 V3 SE Source for Creality Ender-3 V3 SE FDM 3D Printer
- Creality download centre page for the Ender-3 V3 SE Source for Creality Ender-3 V3 SE FDM 3D Printer
- Creality user manual V1.0 offered on that page, covering the Ender-3 V3 SE Source for Creality Ender-3 V3 SE FDM 3D Printer
- ELEGOO Centauri Carbon user manual version 1.3, supplied with the listing Source for ELEGOO Centauri Carbon Enclosed CoreXY 3D Printer
- ELEGOO refund and warranty policy, naming the Centauri Series Source for ELEGOO Centauri Carbon Enclosed CoreXY 3D Printer
Primary sources checked .