Bambu Lab A1 mini Combo with AMS lite (PF002-M and SA005) vs Bambu Lab P1S Enclosed CoreXY 3D Printer
These are side-by-side facts taken from each product guide: published specifications, strengths and caveats as their sources state them. This page is not a test, a ranking or a verdict about which model is better.
Bambu Lab A1 mini Combo with AMS lite (PF002-M and SA005)
Four-colour PLA and PETG prints inside a 180 mm cube
The A1 mini bundled with one AMS lite, giving four-colour printing inside a 180 mm cube with a 300C hotend and an 80C bed. The changer is the reason to buy this bundle, so read what Bambu Lab says it cannot feed: soft TPU, TPE, absorbent PVA and third-party fibre-filled filament.
Published specifications
- Maker: 180 x 180 x 180 mm build; 300C hotend, 80C heatbed
- Maker: one AMS lite per A1 series printer, so four colours maximum
- Maker: AMS lite takes spools 40-68 mm wide, 53-58 mm inner diameter
- Maker: AMS lite combo tubes are 580 mm x2 and 700 mm x2
- Maker: about 48 dB silent mode; 6 W idle, 57 W average printing
- Listing: 16.77 x 14.82 x 19.5 in, 22 lb; needs ~390 mm bed travel
Strengths
- AMS lite is included and switches spools automatically on runout
- Maker confirms the printer can run with no internet, from microSD
- Auto bed levelling and flow calibration need no manual setup
Caveats
- AMS lite is not for soft TPU, TPE, PVA or third-party fibre filament
- 80C bed rules out ABS, ASA, PC, PA and PET per the maker
- Model number carries an AU suffix the supplied guide does not show
Read the full Bambu Lab A1 mini Combo with AMS lite (PF002-M and SA005) guide
Bambu Lab P1S Enclosed CoreXY 3D Printer
ABS and ASA work that needs an enclosure and a carbon filter
An enclosed CoreXY printer with a 256 mm cube build volume, a 100C bed, an activated carbon filter and fans aimed at ABS and ASA. The enclosure is passive: Bambu Lab states the chamber is not actively heated and cannot be precisely controlled. AMS units for multi-colour are a separate purchase, up to four.
Published specifications
- Maker: 256 x 256 x 256 mm build volume; 100C maximum heat bed
- Maker: printer measures 389 x 389 x 458 mm and weighs 12.95 kg
- Maker: chamber is not actively heated and cannot be set precisely
- Maker: up to four AMS units can be connected, none included
- Maker: fibre filament needs a hardened hotend and extruder gear
- Listing: 500 mm/s and 20000 mm/s2 claimed; ideal PLA, PETG, TPU, ABS, ASA
Strengths
- Fully enclosed with an activated carbon filter and three added fans
- Scales to four AMS units for large multi-colour or multi-material jobs
- LAN Only Mode is documented, including binding by IP and access code
Caveats
- Chamber is heated only indirectly by the bed, with no setpoint
- Carbon and glass fibre need a hardened hotend and gear upgrade first
- The listing publishes two different sets of product dimensions
Read the full Bambu Lab P1S Enclosed CoreXY 3D Printer guide
How to choose between them
Choose the Bambu Lab A1 mini Combo with AMS lite (PF002-M and SA005) if your situation matches: Four-colour PLA and PETG prints inside a 180 mm cube. Its main caveat: AMS lite is not for soft TPU, TPE, PVA or third-party fibre filament.
Choose the Bambu Lab P1S Enclosed CoreXY 3D Printer if your situation matches: ABS and ASA work that needs an enclosure and a carbon filter. Its main caveat: Chamber is heated only indirectly by the bed, with no setpoint.
Both entries repeat what each guide records. Confirm the model, included parts and availability on the current listing before ordering.
Primary sources
- Bambu Lab wiki: A1 mini FAQ, including product specifications Source for Bambu Lab A1 mini Combo with AMS lite (PF002-M and SA005)
- Bambu Lab wiki: AMS lite FAQ, including filament restrictions Source for Bambu Lab A1 mini Combo with AMS lite (PF002-M and SA005)
- Bambu Lab wiki: how to enable LAN Mode, including A series printers Source for Bambu Lab A1 mini Combo with AMS lite (PF002-M and SA005)
- Listing-supplied A1 mini with AMS Lite Quick Start, PF002-M and SA005 Source for Bambu Lab A1 mini Combo with AMS lite (PF002-M and SA005)
- Bambu Lab wiki: P1 Series FAQ, including P1S dimensions and chamber behaviour Source for Bambu Lab P1S Enclosed CoreXY 3D Printer
- Bambu Lab wiki: how to enable LAN Mode on Bambu Lab printers Source for Bambu Lab P1S Enclosed CoreXY 3D Printer
Primary sources checked .