Bambu Lab P1S Enclosed CoreXY 3D Printer vs Flashforge Adventurer 5M CoreXY 3D Printer
These are side-by-side facts taken from each product guide: published specifications, strengths and caveats as their sources state them. This page is not a test, a ranking or a verdict about which model is better.
Bambu Lab P1S Enclosed CoreXY 3D Printer
ABS and ASA work that needs an enclosure and a carbon filter
An enclosed CoreXY printer with a 256 mm cube build volume, a 100C bed, an activated carbon filter and fans aimed at ABS and ASA. The enclosure is passive: Bambu Lab states the chamber is not actively heated and cannot be precisely controlled. AMS units for multi-colour are a separate purchase, up to four.
Published specifications
- Maker: 256 x 256 x 256 mm build volume; 100C maximum heat bed
- Maker: printer measures 389 x 389 x 458 mm and weighs 12.95 kg
- Maker: chamber is not actively heated and cannot be set precisely
- Maker: up to four AMS units can be connected, none included
- Maker: fibre filament needs a hardened hotend and extruder gear
- Listing: 500 mm/s and 20000 mm/s2 claimed; ideal PLA, PETG, TPU, ABS, ASA
Strengths
- Fully enclosed with an activated carbon filter and three added fans
- Scales to four AMS units for large multi-colour or multi-material jobs
- LAN Only Mode is documented, including binding by IP and access code
Caveats
- Chamber is heated only indirectly by the bed, with no setpoint
- Carbon and glass fibre need a hardened hotend and gear upgrade first
- The listing publishes two different sets of product dimensions
Read the full Bambu Lab P1S Enclosed CoreXY 3D Printer guide
Flashforge Adventurer 5M CoreXY 3D Printer
PLA, PETG and TPU on a network, in a ventilated room
A CoreXY machine with a 220 mm cube build volume, a 280C direct extruder, a 110C platform and one-click auto levelling. It is open-frame, with a Flashforge DIY enclosure project supplied alongside it. The 600mm/s in the title is the maker's travel speed; its own table lists printing at 10 to 300 mm/s.
Published specifications
- Maker: 220 x 220 x 220 mm build; 280C extruder, 110C platform
- Maker: printing speed 10-300 mm/s; travel 600 mm/s; 20000 mm/s2
- Maker: PLA, PETG, TPU on 0.4 mm; PLA-CF and PETG-CF on 0.6/0.8 mm
- Maker: USB, Wi-Fi and Ethernet; FlashPrint 5 or OrcaSlicer
- Maker: 363 x 376 x 413 mm body, 10.8 kg, plus 20 cm clear all sides
- Maker: 350 W; operating 15-30C; FAT32 USB drives only
Strengths
- Ethernet, Wi-Fi and USB printing documented, with cloud optional
- Maker publishes plate-by-plate and material-by-material glue guidance
- Flashforge supplies its own DIY enclosure files for this model
Caveats
- Listing sells 600mm/s as print speed; the manual calls it travel speed
- Parameter table does not list ABS, ASA, PC or nylon as supported
- Manual says self-modification voids the warranty; no warranty term read
Read the full Flashforge Adventurer 5M CoreXY 3D Printer guide
How to choose between them
Choose the Bambu Lab P1S Enclosed CoreXY 3D Printer if your situation matches: ABS and ASA work that needs an enclosure and a carbon filter. Its main caveat: Chamber is heated only indirectly by the bed, with no setpoint.
Choose the Flashforge Adventurer 5M CoreXY 3D Printer if your situation matches: PLA, PETG and TPU on a network, in a ventilated room. Its main caveat: Listing sells 600mm/s as print speed; the manual calls it travel speed.
Both entries repeat what each guide records. Confirm the model, included parts and availability on the current listing before ordering.
Primary sources
- Bambu Lab wiki: P1 Series FAQ, including P1S dimensions and chamber behaviour Source for Bambu Lab P1S Enclosed CoreXY 3D Printer
- Bambu Lab wiki: how to enable LAN Mode on Bambu Lab printers Source for Bambu Lab P1S Enclosed CoreXY 3D Printer
- Flashforge Adventurer 5M User Guide supplied with the listing Source for Flashforge Adventurer 5M CoreXY 3D Printer
- Flashforge DIY enclosure project sheet for the Adventurer 5M, supplied with the listing Source for Flashforge Adventurer 5M CoreXY 3D Printer
Primary sources checked .