BLUETTI Elite 30 V2 Portable Power Station, 288Wh vs OUPES Mega 1 Portable Power Station (S1), 1,024Wh
These are side-by-side facts taken from each product guide: published specifications, strengths and caveats as their sources state them. This page is not a test, a ranking or a verdict about which model is better.
BLUETTI Elite 30 V2 Portable Power Station, 288Wh
Phones, laptops, routers and lights during short outages or trips
The Elite 30 V2 packs 288Wh of LFP storage and 600W of AC into a 9.5-pound case with 140W USB-C and a 10 ms UPS. Its 1,500W Power Lifting mode suits heating loads only, solar input is 200W, and ECO mode must be switched off for small always-on devices. It cannot take extra batteries.
Published specifications
- Manual: 288Wh LiFePO4; model Elite 30 V2
- Manual: 600W AC total; Power Lifting to 1,500W resistive loads
- Manual: AC input 380W; bypass 980W; UPS 10 ms or less
- Manual: solar 12-28V, 10A, 200W max; car 12V or 24V
- Manual: charge 32-104°F; discharge -4-104°F; IP20
- Manual: 9.8 x 7 x 6.6 in, about 9.48 lb; page: 5-year warranty
Strengths
- 600W AC, 140W USB-C and a 10 ms UPS in a 9.5-pound unit
- Detailed US manual with clear port, charging and storage limits
- Pass-through charging up to 980W while plugged in
Caveats
- ECO mode is on by default and can cut small or critical loads
- No expansion; solar limited to 200W with the cable sold separately
- 1,500W lifting runs heaters at reduced power, not full wattage
Read the full BLUETTI Elite 30 V2 Portable Power Station, 288Wh guide
OUPES Mega 1 Portable Power Station (S1), 1,024Wh
Home backup of mid-size loads where a 20 ms switchover is acceptable
The Mega 1 pairs 1,024Wh of LFP storage with 2,000W continuous AC and 4,500W surge in a 27.8-pound body. It charges at up to 1,400W from the wall and 800W from solar through an Anderson port, and it takes an expansion battery. Its backup switchover is 20 ms, and box contents differ between listing and maker.
Published specifications
- Manual: 1,024Wh LiFePO4 (51.2V, 20Ah); cover code OPS-S1-N-V1.8
- Manual: 120V AC 2,000W, surge 4,500W, bypass 2,000W
- Manual: AC input 1,400W max; car input 12-15V, 8A
- Manual: solar 12-78V, MPPT 18-75V, 14A, 800W max via Anderson
- Manual: EPS switchover 20 ms; working 32-104°F
- Manual: 15.1 x 9.1 x 11.6 in, 27.8 lb; page: 5-year warranty +1 with registration
Strengths
- 2,000W continuous and 1,400W wall charging in a 27.8-pound unit
- 800W solar input and an extra-battery port for later expansion
- Manual gives clear port ratings, error codes and EPS limits
Caveats
- Box contents conflict: maker lists no MC4-to-Anderson solar cable
- 20 ms switchover; manual says not for equipment needing 0 ms
- Charge-time claims differ between listing and OUPES page
Read the full OUPES Mega 1 Portable Power Station (S1), 1,024Wh guide
How to choose between them
Choose the BLUETTI Elite 30 V2 Portable Power Station, 288Wh if your situation matches: Phones, laptops, routers and lights during short outages or trips. Its main caveat: ECO mode is on by default and can cut small or critical loads.
Choose the OUPES Mega 1 Portable Power Station (S1), 1,024Wh if your situation matches: Home backup of mid-size loads where a 20 ms switchover is acceptable. Its main caveat: Box contents conflict: maker lists no MC4-to-Anderson solar cable.
Both entries repeat what each guide records. Confirm the model, included parts and availability on the current listing before ordering.
Primary sources
- BLUETTI Elite 30 V2 product page Source for BLUETTI Elite 30 V2 Portable Power Station, 288Wh
- BLUETTI support page for the Elite 30 V2 Source for BLUETTI Elite 30 V2 Portable Power Station, 288Wh
- BLUETTI Elite 30 V2 user manual PDF (US English, V3.0) Source for BLUETTI Elite 30 V2 Portable Power Station, 288Wh
- OUPES Mega 1 product page Source for OUPES Mega 1 Portable Power Station (S1), 1,024Wh
- OUPES Mega 1 user manual PDF (version OPS-S1-N-V1.8) Source for OUPES Mega 1 Portable Power Station (S1), 1,024Wh
Primary sources checked .