ChargePoint Home Flex Hardwired Level 2 EV Charger, J1772 (CPH50-HARDWIRE-L23) vs EVIQO EVIPOWER NACS 48A Hardwired Level 2 EV Charger
These are side-by-side facts taken from each product guide: published specifications, strengths and caveats as their sources state them. This page is not a test, a ranking or a verdict about which model is better.
ChargePoint Home Flex Hardwired Level 2 EV Charger, J1772 (CPH50-HARDWIRE-L23)
A hardwired circuit where you want to pick the amperage to suit the panel
Home Flex is set at install to match your circuit, anywhere from 16 to 50 amps, with ChargePoint publishing the circuit-to-load table. This hardwired J1772 version can reach the 50-amp maximum, which needs a 70 or 80-amp circuit, and it is the configuration ChargePoint points to for outdoor mounting.
Published specifications
- Guide: 50A max load on an 80A or 70A circuit; 48A on 60A; 40A on 50A; 16A on 20A
- Guide: continuous load device, circuit must be rated for 125% of maximum load
- Guide: dedicated 240V two-pole non-GFCI breaker; 90°C copper, max 6 AWG, terminal to 105°C
- Guide: operating range -40°F to 122°F at 16-48A, -40°F to 113°F at 50A
- Guide: mount centre 39-43 in above the floor; Wi-Fi signal required at the location
- Guide: 3-year parts exchange warranty, original purchaser, single-family residence
Strengths
- Maker publishes the full circuit-rating to maximum-load table, so sizing is checkable
- Wide operating temperature range, down to -40°F at settings up to 48 amps
- Hardwiring unlocks the 60, 70 and 80-amp circuit ratings a plug cannot use
Caveats
- Warranty excludes on-site labour to uninstall or reinstall the station
- No enclosure NEMA or IP rating appears in the guide or product page we read
- Some app functions and troubleshooting need Wi-Fi at the charger's location
Read the full ChargePoint Home Flex Hardwired Level 2 EV Charger, J1772 (CPH50-HARDWIRE-L23) guide
EVIQO EVIPOWER NACS 48A Hardwired Level 2 EV Charger
A Tesla or other NACS car on a hardwired 60-amp circuit
This is EVIQO's hardwired charger with a NACS connector, so Tesla drivers plug in without an adapter and can pop the charge-port cover with a button on the handle. It ships set to 48 amps on a dedicated 60-amp circuit, with a 50-amp setting available behind the faceplate on a 70-amp circuit.
Published specifications
- Guide: 48A on a dedicated 60A circuit; 50A only on a 70A circuit via the internal switch
- Data sheet: 208-240V AC 60 Hz; SAE J3400 (NACS) connector; 25 ft cable; wall mounted
- Guide: NACS handle button works at 315 MHz and only when the car is unlocked or senses your phone
- Data sheet: NEMA 4 / IP66; operating -22°F to 131°F; storage -40°F to 167°F
- Data sheet: UVP, OVP, RCD (CCID20), SPD, ground fault, OCP, OTP protections
- Warranty: 3 years parts exchange, original purchaser, residential, USA and Canada
Strengths
- NACS connector charges Teslas directly, with a charge-port button on the handle
- Maker publishes the full circuit-to-amperage table with switch positions
- IP66 and NEMA 4 housing with a wide stated operating temperature range
Caveats
- J1772 cars need a NACS-to-J1772 adapter, which is not included
- Reaching 50 amps means opening the unit and a 70-amp circuit
- Warranty excludes on-site labour and shipping the unit in for service
Read the full EVIQO EVIPOWER NACS 48A Hardwired Level 2 EV Charger guide
How to choose between them
Choose the ChargePoint Home Flex Hardwired Level 2 EV Charger, J1772 (CPH50-HARDWIRE-L23) if your situation matches: A hardwired circuit where you want to pick the amperage to suit the panel. Its main caveat: Warranty excludes on-site labour to uninstall or reinstall the station.
Choose the EVIQO EVIPOWER NACS 48A Hardwired Level 2 EV Charger if your situation matches: A Tesla or other NACS car on a hardwired 60-amp circuit. Its main caveat: J1772 cars need a NACS-to-J1772 adapter, which is not included.
Both entries repeat what each guide records. Confirm the model, included parts and availability on the current listing before ordering.
Primary sources
- ChargePoint Home Flex 16A-50A installation guide (75-001336-01 r9), supplied with the listing Source for ChargePoint Home Flex Hardwired Level 2 EV Charger, J1772 (CPH50-HARDWIRE-L23)
- ChargePoint Home Flex product page with configuration comparison Source for ChargePoint Home Flex Hardwired Level 2 EV Charger, J1772 (CPH50-HARDWIRE-L23)
- EVIQO EVIPOWER Smart EV Charger installation guide, supplied with the listing Source for EVIQO EVIPOWER NACS 48A Hardwired Level 2 EV Charger
- EVIQO EVIPOWER NACS frequently asked questions sheet, supplied with this listing Source for EVIQO EVIPOWER NACS 48A Hardwired Level 2 EV Charger
Primary sources checked .