ELEGOO Centauri 2 3D Printer vs ELEGOO Centauri Carbon 2 Combo with CANVAS
These are side-by-side facts taken from each product guide: published specifications, strengths and caveats as their sources state them. This page is not a test, a ranking or a verdict about which model is better.
Check ELEGOO Centauri 2 3D Printer on AmazonCheck ELEGOO Centauri Carbon 2 Combo with CANVAS on Amazon
ELEGOO Centauri 2 3D Printer
PLA, PETG, PLA-CF and TPU on a 256 mm build volume
A printer with a 256 mm cube build volume, a 350C brass-hardened steel nozzle, a 110C bed and full-auto calibration. ELEGOO lists the camera, air filter, lighting and exhaust grille as optional expansions, and its own table marks ABS, ASA, PA and PC as not recommended.
Published specifications
- Maker: 256 x 256 x 256 mm build volume; 0.4 mm brass-hardened steel
- Maker: 350C max nozzle; 110C bed at 25C ambient; 5-40C room range
- Maker: up to 500 mm/s (250 recommended); 20,000 mm/s2 max accel
- Maker: 398 x 404 x 490 mm, 13.7 kg net; listing 30.1 lb agrees
- Maker: 350 W at 110 V, 1,100 W at 220 V; 100-240 VAC input
- Maker: USB and Wi-Fi; STL, OBJ, 3MF, STEP; ElegooSlicer, Orca, Cura
Strengths
- Full-auto calibration, clog detection and runout sensing included
- Native TPU support on the standalone printer, per ELEGOO
- Listing and ELEGOO agree on size and weight
Caveats
- Camera, air filter, lighting and exhaust grille are add-ons only
- ELEGOO marks ABS, ASA, PA and PC as not recommended on this model
- No warranty term or noise figure found in the sources we read
ELEGOO Centauri Carbon 2 Combo with CANVAS
Four-colour printing with a 350C nozzle in an enclosed frame
An enclosed printer with a 256 mm cube build volume, a 350C brass-hardened steel nozzle, a 110C bed and HEPA plus carbon filtration, bundled with ELEGOO's four-spool CANVAS feeder that reads RFID tags or takes manual filament entry. The Combo stands 743 mm tall.
Published specifications
- Maker: 256 x 256 x 256 mm build volume; 0.4 mm brass-hardened steel
- Maker: 350C max nozzle; 110C max bed; 5-40C ambient range
- Maker: up to 500 mm/s (250 recommended); 20,000 mm/s2 max accel
- Maker: Combo 500 x 480 x 743 mm, 19.35 kg; printer alone 17.5 kg
- Maker: 350 W at 110 V, 1,100 W at 220 V; 45 dB or less in Silent Mode
- Maker: USB and Wi-Fi; STL, OBJ, 3MF, STEP; ElegooSlicer, Orca, Cura
Strengths
- 350C nozzle, with PC, PA and fibre-filled filaments on ELEGOO's list
- Four-spool CANVAS included, with RFID or manual filament entry
- HEPA plus activated carbon filtration listed as standard
Caveats
- Warranty length varies by component and is not stated in the manual
- Combo stands 743 mm tall; measure shelf height before buying
- No chamber temperature figure or CANVAS filament limits published
Read the full ELEGOO Centauri Carbon 2 Combo with CANVAS guide
How to choose between them
Choose the ELEGOO Centauri 2 3D Printer if your situation matches: PLA, PETG, PLA-CF and TPU on a 256 mm build volume. Its main caveat: Camera, air filter, lighting and exhaust grille are add-ons only.
Choose the ELEGOO Centauri Carbon 2 Combo with CANVAS if your situation matches: Four-colour printing with a 350C nozzle in an enclosed frame. Its main caveat: Warranty length varies by component and is not stated in the manual.
Both entries repeat what each guide records. Confirm the model, included parts and availability on the current listing before ordering.
Primary sources
- ELEGOO US product page and specification table for the Centauri 2 Source for ELEGOO Centauri 2 3D Printer
- ELEGOO Centauri 2 user manual attached to the listing Source for ELEGOO Centauri 2 3D Printer
- ELEGOO US product page and specification table for the Centauri Carbon 2 Source for ELEGOO Centauri Carbon 2 Combo with CANVAS
- ELEGOO Centauri Carbon 2 Combo User Manual V1.3 attached to the listing Source for ELEGOO Centauri Carbon 2 Combo with CANVAS
Primary sources checked .