For most homes, get the Raptor stainless micro-mesh kit. Its fine screen stops pine needles and roof grit, the screws are in the box, and it’s the only pick with a published UL listing. For white gutters, get the Waterlock DIY. Under broad-leaf trees with hidden-hanger gutters, the A-M bundle does the job.
Best for pine needles and roof grit$139.99 at AmazonPrice as of Nov 16, 2026, 5:34 AM EST
All three were new and in stock at our 3:01 AM check on Oct 22, each sold by its own maker. Each fits 5 in. gutters and screws to the gutter’s front lip.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
How the three guards score
One formula for all three: the filter, screws in the box, warranty length, roof contact and any published third-party listing.
Plain Buy Guides spec score out of 10, from five checks on each maker’s own pages. It’s our arithmetic, not a customer rating.
Raptor leads because it’s the only one with a published third-party listing: UL approval under NSF P151 and NSF/ANSI 372, plus a fire-zone (WUI) claim. Its only lost point is the warranty, which its own pages give as 25 or 30 years.
Waterlock and A-M both fit without lifting shingles and both include screws. A-M scores lower because its cover is perforated aluminum, not a fine stainless screen.
Fits 5 in. or smaller48 ft nominal30 mesh stainless540 micronScrews includedModel AMZ48
Buy it if
You have pines or shed shingle grit, or you collect rainwater, and your gutters are 5 in. wide or smaller.
Skip it if
Your gutters are 6 or 7 in. wide. Raptor’s Super kit fits those, but it had only 1 left at our check.
Raptor is Amazon’s exclusive DIY gutter guard, made by Gutterglove Inc. of Franklin, Tennessee. This 48 ft kit, model AMZ48, fits gutters 5 in. wide or smaller. It was new, sold by Gutterglove and in stock at our 3:01 AM check on Oct 22.
It’s our top pick because it’s the only guard here with a published third-party listing. Raptor says its mesh is UL approved under NSF P151 and NSF/ANSI 372 as a rainwater catchment component. It also says the guard is non-combustible and meets Wildland-Urban Interface (WUI) rules used in fire-prone states.
The filter is a 30 mesh stainless steel screen with a 540 micron opening. Gutterglove says that stops leaves, pine needles, pests and fine roof grit while water passes through. A patented V-Bend and trough shape stiffens the mesh and keeps debris from sticking.
The frame is mill-finish aluminum, and self-tapping screws come in the box. You cut sections with tin snips and drive the screws with a drill and hex driver. Sections come 3 ft and 4 ft long and overlap at each join.
It doesn’t have to go under your shingles. If they’re nailed or glued at the edge, Raptor says to bend the back of the mesh and screw it to the fascia, keeping a 5 to 25 degree forward slant. On roofs of 8/12 pitch or steeper, drop that to 5 to 10 degrees.
Kit sizes are nominal footage. Overlaps and corner cuts use some of it, so Raptor says to add 10% to your measured gutter length. A house with 150 ft of gutter needs at least 165 ft of kit, which is four of these boxes.
The warranty is its one lost point. Raptor’s FAQ and warranty page say 30 years, limited and transferable, while its home page says 25. We score the 25. Register after installing and Raptor sends a free Gutter Brush for clearing debris off the top.
It scores 9.8. Our call: the guard to get if pine needles, roof grit or rain barrels are part of your story.
5 in. K-style and box25 × 4 ft sections304 stainless mesh0.019 in. frameZip screws includedModel 54322
Buy it if
You have white 5 in. K-style or box gutters and want a stainless screen in a frame that matches them.
Skip it if
You have half-round gutters, or heavy snow and ice. Art of Gutter points those buyers to its thicker Waterlock Micromesh line.
Waterlock DIY is the install-it-yourself line from Art of Gutter, Inc., of Tobyhanna, Pennsylvania. This pack holds 25 white four-foot sections, 100 ft in all, for 5 in. K-style and box gutters. It was new, sold by Art of Gutter and in stock at our 3:01 AM check on Oct 22.
The screen is type 304 stainless steel micromesh pressed into a 0.019 in. aluminum frame. Art of Gutter calls the fold its Z-Bend: a Z-shaped crimp that holds the mesh with no glue or sealant. A mesh notch overlaps each section with the next, so a run has no visible seams.
Only the front edge gets screws. The back edge rests against the back wall of the gutter on your hangers, and you drive 3 or 4 color-matched zip screws per section along the front lip. The screws are included. With no shingle contact, Art of Gutter says your roof warranty is unaffected.
It suits metal, flat and shingle roofs, and the listing adds wood and slate. Half-round gutters are the exception. Art of Gutter makes separate half-round guards for those.
The warranty scores a full 10, with a catch worth reading. It’s called lifetime and transferable, and lifetime means the service life of the roof the guards sit under, or 35 years, whichever ends first. Replace the roof and the coverage ends. There’s no registration; keep your receipt.
The maker’s upkeep advice is light: rinse the front edge with a garden hose a few times a year, more often where cottonwood, tree tassels or sap are common. Art of Gutter calls that a recommendation, not a warranty condition.
It loses points only for having no published third-party listing, which leaves it at 9.0. The maker’s thicker Waterlock Micromesh has a 0.027 in. frame and a drip edge, and it’s Art of Gutter’s choice for heavy snow, ice or older gutters. This DIY line is lighter and costs less per foot.
Our call: stainless micro-mesh in a white frame, for 5 in. gutters that aren’t half-round.
5 in. K-style100 ft.018 gauge aluminum380 holes per ft100 zip screwsHex driver
Buy it if
Your trees drop mostly broad leaves and your gutters hang on hidden hangers.
Skip it if
Pine needles and shingle grit are the problem. Get the Raptor.
A-M Gutter Guard is made by Rayden Enterprises in Northeast Ohio. The owners, brothers Ray and Aden Miller, have been in the gutter business since 2008 and patented this design in 2015. This bundle pairs 100 ft of 5 in. mill-finish guard with 100 stainless zip screws and a magnetic hex driver. It was new, sold by Rayden Enterprises and in stock at our 3:01 AM check on Oct 22.
It’s the only pick without mesh. The cover is .018 gauge aluminum stamped with a patented bubble pattern and 380 holes per linear foot. A-M says air moves over and under the bubbles, so leaves dry out and blow away while water drops through the holes.
Buy the bundle rather than the guard alone. A-M’s own support page lists the half-inch zip screws as not included with its guard, and this bundle adds 100 of them in 410 stainless steel. That’s what earns it the full screws score.
A-M designed it for hidden hangers and says it also works with K-style hangers and spike-and-ferrule hangers. Its listing says the guard won’t void roof warranties, Fortified Roofs included. The panels overlap at each join, and A-M says tabs make the joins smooth.
The warranty is lifetime and covers rust, rot and the guard breaking down on its own. The maker’s store adds no clogging to that list. A-M doesn’t publish an end date or a transfer rule.
One number doesn’t line up. The listing says the box covers a full 100 ft installed, with extra pieces for the overlaps. The text on the maker’s 100 ft box page says 50 ft per box in 13 pieces of 46.5 in., which is about 50 ft. Count the pieces when yours arrives.
It scores 8.6. Perforated aluminum scores below a stainless screen, and A-M publishes no third-party listing. Art of Gutter, which makes both kinds, says perforated covers block leaves, twigs and seeds, while its micromesh also stops pine needles and roof grit.
Our call: a sturdy, made-in-USA cover for leafy yards and hidden-hanger gutters.
The three guards compared
From each maker’s own pages and listing. Scroll sideways on a phone; tap a number heading to sort on a desktop.
All three sit on top of the gutter, screw to its front lip and come with screws. None needs you to pry up shingles, which is why roof contact scores the same for all three.
How many boxes your gutters need
Boxes differ in length, and makers differ on how much extra to buy. This table does the math with each maker’s own rule.
Feet of guard in one box, from each listing. Raptor’s footage is nominal: raw material before overlaps and cuts.
Your gutter length
Raptor 48 ft kits (add 10%)
Waterlock 100 ft packs (add 10%)
A-M 100 ft boxes
100 ft
3
2
1
150 ft
4
2
2
200 ft
5
3
2
Raptor says to add 10% because overlaps, miter cuts and trimming at end caps eat into nominal footage. Art of Gutter suggests 5 to 10% extra for corners and cuts; we used 10%. A-M’s listing says its box covers a full 100 ft installed, so we added nothing.
To measure, walk around the house and measure each gutter run with a tape measure, then add the runs. Raptor says most homes land between 100 and 200 ft.
Measure this
How
Why it matters
Total length
Each run, end to end, added together
Sets how many boxes you buy
Gutter width
Across the top, from the front outer lip straight back to the fascia
All three picks here are for 5 in. gutters
Gutter shape
K-style (flat back, decorative front), box, or half-round
Waterlock DIY doesn’t fit half-round
Hangers
Look inside: hidden brackets, or spikes through the front
A-M is designed around hidden hangers
Inside corners
Count them
Each needs a miter cut; Raptor sells a high-flow inside miter for corners that overspill
What each kind of guard keeps out
Your trees decide the filter. Here’s what each maker says its guard stops.
Debris
Raptor (stainless mesh)
Waterlock DIY (stainless mesh)
A-M (perforated aluminum)
Broad leaves (oak, maple)
Yes
Yes
Yes
Pine needles
Yes
Yes
Yes, per A-M’s store
Seeds and twigs
Not stated
Seeds, yes
Twigs and seeds, per Art of Gutter’s note on perforated covers
Roof grit from shingles
Yes, blocked at the surface
Shingle grit, yes
Not stated
Pollen
30 mesh, which Raptor says keeps pollen out; brush if it clogs
Not stated
Not stated
Pests and birds
Pests, yes
Pests and birds, yes
Not stated
Pine needles are the hard test. They slip lengthwise through larger openings and mat together. Both stainless screens here are sold specifically for them, and Art of Gutter calls micromesh its pick for homes with a lot of trees.
Roof grit matters on asphalt roofs. Raptor says the grit sits on top of its mesh instead of clogging it, and wind and rain move it off. A-M doesn’t address grit either way.
Your yard
Start with
Why
Pines, spruce or cedar nearby
Raptor or Waterlock DIY
Fine stainless screen for needles
Mostly oak and maple
Any of the three
All three stop broad leaves
Cottonwood, tassels or sap
Waterlock DIY or Raptor, and plan to rinse more
Art of Gutter says to rinse more often where these are common
Rain barrel or tank
Raptor
The only one listed for rainwater catchment (NSF P151)
Wildfire area
Raptor
The only one with a stated WUI claim
Will it fit your gutters and roof?
Gutter width, shape, hangers and roof pitch, from each maker’s fit notes.
Fit question
Raptor
Waterlock DIY
A-M bundle
Gutter width
5 in. or smaller; 2 to 4 in. by bending the mesh
5 in. (a 6 in. version is sold separately)
5 in. (a 6 in. version is sold separately)
Gutter shape
K-style, U-shaped vinyl and others
K-style and box; not half-round
K-style
Hangers
Not stated
Back edge rests on your existing hangers
Designed for hidden hangers; works with K-style and spike-and-ferrule
Roofs
Asphalt, metal, tile, wood shake and more
Metal, flat, shingle; listing adds wood and slate
Not stated
Back edge
Under shingles, or bent and screwed to the fascia
Rests against the back wall of the gutter
Not stated
Front edge
Flat on the gutter’s front lip, screwed
3 to 4 zip screws per section
Zip screws; placement not stated
Slope matters on steep roofs. Raptor’s rule is a 5 to 25 degree forward slant for most roofs, and 5 to 10 degrees on roofs 8/12 or steeper, so fast water has time to drop through instead of shooting past.
Copper gutters need one extra thought. Raptor says its aluminum edges, not the mesh, touch the gutter, and minor surface corrosion can sometimes form where the two metals meet. It suggests a paint made for mill-finish aluminum on the edges if that worries you.
What install day takes
All three are sold for do-it-yourself installs. The ladder is the hard part, not the guard.
Tool
What it’s for
Who says so
Tin snips
Cutting sections to length and at miters
Raptor
Drill with a hex driver
Driving self-tapping zip screws
Raptor; the A-M bundle includes a magnetic hex driver
Gloves and safety glasses
Cut stainless edges are sharp
Raptor
Extension ladder, 16 to 24 ft for most homes
Reaching the gutter line
Raptor
Ladder standoff stabilizer
Keeps the ladder off the gutter on two-story work
Raptor
Tape measure
Run lengths and gutter width
Raptor, Art of Gutter
Start by cleaning out the gutters. Art of Gutter’s free-flow promise assumes clean, properly sloped gutters with clear downspouts and no downspout screens left in. Then set each section’s front edge flat on the gutter’s front lip and screw it down.
On a two-story house, Raptor recommends a ladder rated for the height, a standoff, and a safety harness above single-story height. If ladder work isn’t safe for you, it suggests hiring a handyman. Our extension ladder guide and tin snips guide cover the two tools you’ll lean on most.
Step
What to do
Source
1
Clean the gutters and downspouts; pull any downspout screens
Art of Gutter, Raptor
2
Lay the first section flush at one end, front edge flat on the lip
Raptor
3
Seat the back edge: against the gutter’s back wall (Waterlock) or under shingles or on the fascia (Raptor)
Art of Gutter, Raptor
4
Screw along the front: 3 or 4 screws per Waterlock section
Art of Gutter
5
Overlap the next section and keep going
Raptor, Art of Gutter, A-M
6
Cut miters at corners with tin snips
Raptor
7
Watch the first hard rain: pooling means too flat, overshooting means too steep
Raptor
Are gutter guards worth it?
They cut gutter cleaning, not all upkeep. Here’s what each maker says is left to do.
Guard
What the maker says you still do
How often
Raptor
Brush debris off the top; it reduces upkeep but doesn’t end it
Once or twice a year
Waterlock DIY
Rinse the front edge with a garden hose and look the guards over
A few times a year; more with cottonwood or sap
A-M
Maker calls it self-cleaning and says it never clogs
No schedule given
The honest answer is in the warranties. Art of Gutter’s doesn’t cover clogging or overflow from debris left in place, and Raptor says a little debris builds up on top of any guard. A guard trades scooping wet sludge out of the gutter for brushing or rinsing the top.
Leaves still have to go somewhere once they blow off the roof. A leaf vacuum or a blower from our leaf blower guide handles what lands in the yard.
Warranty term
Raptor
Waterlock DIY
A-M
Length
30 years (FAQ, warranty page); 25 (home page)
Life of the roof, up to 35 years
Lifetime
Transfers to the next owner
Yes
Yes, automatically
Not stated
Registration
Register for the free brush
Not needed; keep the receipt
Not stated
What ends it
Not stated
Roof replaced, guards removed, or 35 years
Not stated
Painting
Voids the warranty
Frame may be painted; don’t coat the mesh
Not stated
Covers
Manufacturing and material defects
Rust, corrosion, finish, and free flow if installed per the guide
Rust, rot, breaking down; maker’s store adds no clogging
Six kinds of gutter guard
This guide scores one kind: DIY covers that screw to the gutter’s front lip. Here’s how the rest compare.
Kind
How it works
An example we checked
In this guide
Stainless micro-mesh cover
Fine steel screen in an aluminum frame on top of the gutter
Raptor, Waterlock DIY
Yes, scored
Perforated aluminum cover
Solid sheet with holes or slots on top of the gutter
A-M, FlowGuard
Yes, scored
Under-shingle flat guard
Slides under the first row of shingles
Waterlock Micromesh Flat (not sold on Amazon)
No: Art of Gutter advises against it on roofs over 30 degrees or shingles over 5 years old
Brush insert
A long round brush that sits inside the gutter
GutterBrush, 4.25 in. for 5 in. gutters, 10-year warranty
No, a different kind: no screws, no cover
Foam insert
A foam wedge that fills the gutter
GutterStuff
No: its 5 in. K-style listings weren’t in stock at our check
Pro-installed system
Sold and installed by a dealer
Gutterglove’s LeafBlaster Pro line
No: not sold as a DIY kit
Guard
Why it isn’t a pick
What it does well
FlowGuard by FlexxPoint, 5 in. 102 ft
No maker website we could find to check its claims
Stainless zip screws included; listing claims a 50-year warranty
EasyOn stainless micro-mesh, 36 ft
A Costco exclusive, resold on Amazon by a third party with 13 left
Same V-Bend mesh idea as Raptor
Raptor Super, 6 in.
Only 1 left at our check
Fits 6 and 7 in. gutters
A-M 5 in. 100 ft without screws
Same guard; A-M says screws aren’t included
Fine if you already own stainless zip screws
Where the makers’ own pages disagree
When a maker gives two figures, we show both and score the lower one.
Guard
One page says
Another says
What we did
Raptor warranty
30 years (FAQ and warranty page)
25 years (home page)
Scored 25
A-M box length
Covers a full 100 ft installed (listing)
50 ft per box, 13 pieces of 46.5 in. (maker’s 100 ft box page)
Used the listing; flagged it in the card
Waterlock warranty
Lifetime transferable (product page)
Lifetime means the roof’s life, up to 35 years (warranty page)
Scored as 30 years or more
Which gutter guard fits your house?
Answer these in order. The first yes is usually your pick.
Question
If yes
If no
Are your gutters half-round, or 6 in. or wider?
None of these three; check the maker’s 6 in. or half-round versions
Read on
Do pines, roof grit or a rain barrel matter to you?
Raptor
Read on
Are your gutters white, and do you want stainless mesh?
Waterlock DIY
Read on
Mostly broad leaves and hidden hangers?
A-M bundle
Raptor
Price per foot isn’t in this table on purpose. Raptor comes in 48 ft boxes and the other two in 100 ft packs, so compare the cost for your whole house using the box table above, at the live prices on Amazon.
If you’re hiring someone anyway, the install is the bigger cost. Raptor says most home installs take a day with the right tools.
Questions people ask
What is the best gutter guard?
For most homes, the Raptor stainless micro-mesh kit: a 30 mesh stainless screen, screws in the box, no need to lift shingles, and a published UL listing. For white gutters, the Waterlock DIY; for hidden-hanger gutters under broad leaves, the A-M bundle.
Are gutter guards worth it?
They cut gutter cleaning, but none of the stainless picks claims zero upkeep. Raptor says to brush the top once or twice a year, and Art of Gutter suggests rinsing the front edge a few times a year. A-M calls its guard self-cleaning.
What is the best gutter guard for pine needles?
A stainless micro-mesh guard. Raptor’s 30 mesh screen has a 540 micron opening and is sold to stop pine needles, and Waterlock DIY lists pine needles too. Art of Gutter recommends micromesh for homes with a lot of trees.
Is stainless steel or aluminum better for gutter guards?
Most good guards use both: a stainless screen in an aluminum frame. Raptor and Waterlock work that way. A-M is all aluminum with holes instead of mesh. All three makers say their metals won’t rust.
Do gutter guards void a roof warranty?
These three install without prying up shingles. Raptor can screw to the fascia, Waterlock never touches the shingles, and A-M’s listing says it won’t void roof warranties. Check your own roof warranty’s terms too.
How many feet of gutter guard do I need?
Measure every gutter run and add them up; Raptor says most homes have 100 to 200 ft. Then add extra for overlaps and cuts: 10% for Raptor’s nominal kits, 5 to 10% by Art of Gutter’s advice.
What size gutter guard do I need?
Measure across the top of the gutter, from the front outer lip straight back to the fascia. All three picks here are for 5 in. gutters; each maker also sells 6 in. versions.
Can I install gutter guards myself?
Yes, all three are sold as DIY kits. You need tin snips, a drill with a hex driver, gloves, safety glasses and a safe ladder setup. On a two-story house, Raptor recommends a standoff and a harness.
Do gutter guards work in heavy rain?
The makers say yes within limits. Art of Gutter’s mesh breaks up heavy rain so it drops in, and A-M has 380 holes per foot. Inside corners can overspill; Raptor sells a high-flow inside miter for that.
Do gutter guards cause icicles or ice dams?
Raptor says icicles can form on any guard and its guard doesn’t add to them; attic insulation and clear downspouts help. Art of Gutter steers heavy snow and ice areas to its thicker Micromesh line, and its warranty excludes ice dams.
What is a gutter brush?
Two different things. A brush insert, such as GutterBrush, is a round bristle brush that sits inside the gutter. A gutter cleaning brush goes on a pole to sweep debris off a guard; Raptor sends one free when you register.
Can I paint gutter guards?
Not the Raptor: painting it voids the warranty and can void its rainwater listing. Art of Gutter allows painting the frame but not coating the mesh, because painted mesh clogs.
Can I collect rainwater through a gutter guard?
Raptor is UL approved under NSF P151 and NSF/ANSI 372 as a rainwater catchment component, and Gutterglove says its 540 micron opening meets ANSI 63-2013 for pre-filtering. The other two don’t publish a rainwater listing.
How we pick gutter guards
How we pick
We looked for DIY gutter guards for 5 in. gutters that screw to the front lip, whose makers publish their specs and warranty. We kept three that score 7.0 or more on one formula.
At 3:01 AM on Oct 22, 2026, the Amazon listings showed each guard new and in stock, sold by its own maker.
Why trust us
Isaac Daniels owns and edits Plain Buy Guides. The specs, fit rules and warranty terms on this page come from Raptor’s (Gutterglove’s), Art of Gutter’s and A-M’s own pages, with the Amazon listings where a maker is silent. Each source is named below.
The spec score, check by check
Each check scores 0 to 10 from the maker’s own pages and counts one fifth of the total. Anything a maker doesn’t state scores 5. When a maker’s pages disagree, we score the lower figure. A guard needs 7.0 to be picked. It’s our score, not a customer rating.
Check (weight)
How it’s scored
Filter (1/5)
10 for a stainless micro-mesh screen; 8 for perforated aluminum; 6 for a brush, foam or plastic filter
Screws (1/5)
10 when screws come in the box; 6 when they don’t
Warranty (1/5)
10 for lifetime or 30 years or more; 9 for 20 to 29 years; 8 for 10 to 19; 6 for less
Roof (1/5)
10 when the maker says it installs without going under shingles or affecting the roof warranty; 7 when it must tuck under shingles
Listing (1/5)
10 for a published third-party listing (UL or NSF rainwater component, or WUI fire compliance); 5 when none is stated
Total
Average of the five, to one decimal
Guard
Filter
Screws
Warranty
Roof
Listing
Score
Raptor 48 ft stainless micro-mesh
10
10
9
10
10
9.8
Waterlock DIY 5 in. 100 ft
10
10
10
10
5
9.0
A-M 5 in. 100 ft bundle
8
10
10
10
5
8.6
Sources
Raptor Gutter Guard (Gutterglove Inc.), home page, stainless steel page, FAQ, warranty page and installation guide, raptorgutterguard.com, read Oct 22, 2026
Art of Gutter, Inc., Waterlock DIY 5 in. product page, lifetime warranty page and FAQ, artofgutter.com, read Oct 22, 2026
A-M Gutter Guards (Rayden Enterprises), product pages for the 5 to 6 in. 100 ft box, stainless zip screws and 8 ft upgrade, plus the about and Amazon customer support pages, amgutterguards.com, read Oct 22, 2026
Amazon listings for the three picks and for FlowGuard, EasyOn, Raptor Super 6 in., A-M 5 in. without screws, GutterBrush and GutterStuff, read Oct 22, 2026
Amazon offer and image reads, Oct 22, 2026, 3:01 AM EDT