Our top pick is the Brent CXC: it handles 300 lb of clay and has a 10-year warranty. For mugs and bowls, the Speedball Clay Boss takes 100 lb with the same warranty. Every pick here can spin both ways.
Best for throwing very large forms$2,295.00 at AmazonPrice as of Nov 16, 2026, 5:34 AM EST · low stock then
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
The six wheels, card by card
Best for throwing very large forms
Brent Model CXC
Potter’s wheel, 1 hp, 300 lb capacity, 14 in. wheel head (yellow)
Belt drive; belts are a wear part the warranty excludes
AMACO publishes no weight or size on the page we read
Sold by a third-party seller on Amazon
300 lb capacity1 hp DC motor0–240 rpm14 in. headReversible10-year warranty
Buy it if
You throw big jars, platters or tall forms and want headroom for years.
Skip it if
You make mugs and bowls on a small circuit. The Brent B draws 5 amps for 150 lb.
The CXC is Brent’s heavy-duty wheel and our top pick. It was new and in stock at our 1:16 PM check on Oct 22, with 9 left, and it scores 10.0, the top of our scale.
AMACO, which makes Brent wheels, says the CXC “can handle 300 pounds of clay continuously.” That’s the most of any wheel we checked, and double the Brent B. The motor is a permanent-magnet 1 hp DC unit drawing 10 amps, which AMACO ties directly to that 300 lb figure.
Every Brent here uses the Classic Controller. AMACO says wheel speed “remains constant under varying loads,” so the head doesn’t bog down as you lean into a big lump. The pedal is cast aluminum on a 4 ft cord and runs the head from 0 to 240 rpm.
Direction is a toggle switch with a neutral safety position between forward and reverse, so the wheel stops before it turns the other way. AMACO adds electronic noise filtering for quiet running and an indicator light that sticks out of the control box, where you can see it from the stool.
The 14 in. cast aluminum head is marked with rings to help you center and comes with two bat pins. AMACO includes a splash pan and a 14 in. Plast-i-Bat in the box. The frame is all steel with a solid table and powder-coated legs.
Drive is a 6-groove poly-v belt with automatic tensioning, which keeps it tight as it stretches. Belts still wear: AMACO’s warranty sheet lists belts and wheel heads among the wear parts it doesn’t cover. Seattle Pottery Supply notes belt wheels are simple to service because the parts are separate.
The warranty is 10 years from purchase. Register within six months, keep the original receipt, and have the model and serial number ready. AMACO says to start with the seller; if they can’t help, AMACO’s technical support takes the claim. Work by anyone but an authorized dealer or AMACO voids it.
Our call: the wheel for big forms and heavy daily use. It scores 10.0, a perfect mark on all four checks. If you never center more than 100 lb, the extra capacity goes unused.
Best for school and art center studios
Brent Model C
Potter’s wheel, 3/4 hp, 225 lb capacity, 14 in. wheel head (yellow)
225 lb capacity3/4 hp DC motor0–240 rpm14 in. headReversible10-year warranty
Buy it if
You run a shared studio or classroom and want more headroom than 150 lb.
Skip it if
You need the most capacity on the page. The Brent CXC takes 300 lb.
The Model C sits between the B and the CXC in Brent’s line. It was new and in stock at our 1:16 PM check on Oct 22, with 6 left. It scores 9.7, second on our cards.
AMACO says the C “can handle 225 pounds of clay continuously” and recommends it for both schools and art centers. It also says this is the wheel ceramic artist Danny Meisinger uses for his towering pieces. That’s AMACO’s claim; we score only the capacity figure.
The motor is a permanent-magnet 3/4 hp DC unit drawing 7 amps. It sits between the B’s 5 amps and the CXC’s 10, which matters if a classroom runs several wheels on one circuit. Speed runs 0 to 240 rpm from the cast aluminum foot pedal.
It shares the Classic Controller with the rest of the Brent line. AMACO says wheel speed stays constant under varying loads, and the forward/reverse toggle has a neutral position in the middle. Left-handed students, or anyone who switches direction by project, flip one switch.
The 14 in. head is cast aluminum, ringed for centering and drilled for two bat pins. AMACO includes a splash pan and a 14 in. Plast-i-Bat. Belt tension is automatic on a 6-groove poly-v belt, and the legs are powder coated against scratches and rust.
Its score falls short of 10 on one check only. Capacity of 225 lb lands in our 200 to 299 band and scores 9, against 10 for the CXC’s 300. Warranty, speed under load and direction all score full marks.
One gap on Amazon: the C’s listing carries no feature bullets, only the title “Brent C (Yellow).” We matched it by the brent‑C badge on the table in the photo. The seller is a third party, and AMACO’s warranty still runs from your receipt and registration within six months.
Our call: a classroom or shared-studio wheel with room for big work. It scores 9.7, held back only by capacity compared with the CXC.
Best for school and studio potters
Brent Model B
Potter’s wheel, 1/2 hp, 150 lb capacity, 14 in. wheel head (yellow)
150 lb capacity1/2 hp DC motor0–240 rpm14 in. headReversible10-year warranty
Buy it if
You want Brent’s controller and warranty for everyday pots and don’t need 225 lb or more.
Skip it if
You plan big jars or garden pots. The Brent C takes 225 lb.
The Model B is the entry point to Brent’s line. It was new and in stock at our 1:16 PM check on Oct 22, with 10 left. It scores 9.3, third on our cards.
AMACO says the B was “designed to fill the needs of school and studio potters” and handles 150 pounds of clay continuously. That’s 50 lb more than the Clay Boss and the VL‑Whisper, and well past what most people center for mugs, bowls and vases.
The motor is a permanent-magnet 1/2 hp DC unit drawing 5 amps, the lightest draw of the three Brents. Speed runs 0 to 240 rpm from the same cast aluminum foot pedal on a 4 ft cord.
You get the full Classic Controller: speed that AMACO says stays constant under varying loads, quiet electronic filtering, a forward/reverse toggle with a neutral position, an indicator light and modular plugs for the motor and pedal, which AMACO says make replacements easier.
The 14 in. head is cast aluminum with centering rings and two bat pins. A splash pan and a 14 in. Plast-i-Bat come with it. The frame is all steel with a solid table, and the 6-groove poly-v belt tensions itself.
Capacity is the one check below full marks: 150 lb scores 8 in our 150 to 199 band. The 10-year warranty, steady speed under load and a reversing switch all score 10.
Read the rebate carefully. The Amazon listing mentions a $100 product rebate. AMACO’s own page describes a $100 rebate of AMACO glazes with purchase and warranty registration, for North American end users only. We go by AMACO’s wording.
Our call: Brent quality for everyday studio work at the lowest current draw in the line. It scores 9.3, held back by capacity alone.
Best for large forms up to 175 lb
Speedball Big Boss
Pottery wheel with 1.0 hp motor, 14-inch wheel head, 175 lb capacity
Reversing takes unplugging and turning a connector
Speedball advises a 20 A circuit near full capacity
Register within 30 days or the warranty isn’t in effect
Only 10 left at our check
175 lb capacity1.0 peak hp motor0–240 rpm14 in. headReversing plug10-year warranty
Buy it if
You throw big pieces and want a maker that sells on Amazon under its own name.
Skip it if
You switch direction often. The Brent B has a toggle switch.
The Big Boss is Speedball’s large-form wheel. It was new and in stock at our 1:16 PM check on Oct 22, with 10 left. It scores 9.0, fourth on our cards.
Speedball rates it at 175 lb of clay with a 1.0 peak horsepower industrial motor that it says runs quietly. The Amazon title says 1.0 hp without the word peak. We score capacity, which both agree on, not horsepower.
Speed runs 0 to 240 rpm from the foot pedal, and Speedball says the 14 in. head “remains smooth and constant under varying loads.” The head uses universal bat pin spacing of 10 in., so any bat made for universal spacing fits. The listing says the foot pedal and a two-part splash pan are included.
Height adjusts at each leg. Speedball’s manual says each leg’s length can be changed to raise or lower the wheel or to level it on an uneven floor, which helps in a garage or basement.
Reversing is the trade-off. Speedball’s FAQ says to switch it off, unplug it, unplug the motor cord at its connector, turn the connector 180 degrees and plug it back in. It works, but it’s slower than a switch, so direction scores 8.
Power needs some thought. Speedball’s manual recommends a 15 amp circuit and a 20 amp circuit “for use near or at stated wheel capacity.” It runs on 110 or 220 volts. If you plan 150 lb lumps, put it on a 20 amp circuit.
The warranty is 10 years, parts and labor when the labor is done at Speedball’s factory. You must register within 30 days of purchase to make it effective, and it’s non-transferable. A full replacement is only considered for claims within 30 days; after that, you ship the parts prepaid to Statesville, North Carolina.
Our call: a big-form wheel from a maker that sells direct. It scores 9.0. The Boss Elite is the same wheel with a utility shelf, if you can find one in stock.
Best for mugs, bowls and mid-size forms
Speedball Clay Boss
Pottery wheel with 0.5 hp motor, 14-inch wheel head, 100 lb capacity
Polyethylene top and two-part splash pan clean easily
Sold by Speedball on Amazon
Cons
100 lb capacity, the lowest of the picks
Reversing takes unplugging a connector
No statement on drive type
Register within 30 days for the warranty
100 lb capacity0.5 hp motor0–240 rpm14 in. head68 lb10-year warranty
Buy it if
You make mugs, bowls, plates and vases at home and want a 10-year warranty.
Skip it if
You plan big jars or planters. The Big Boss takes 175 lb.
The Clay Boss is Speedball’s mid-size wheel. It was new, in stock and sold by Speedball at our 1:16 PM check on Oct 22. It scores 8.7, fifth on our cards.
Speedball rates it at 100 lb of clay with a 0.5 hp industrial motor. That’s the lowest capacity of our picks, tied with the Shimpo, and it scores 7 on that check. For mugs, bowls and plates, 100 lb is far more than you’ll center at once.
Speedball calls its control “sophisticated load-sensing control” and says it keeps the head speed steady under changing loads. The foot pedal gives 0 to 240 rpm. The 14 in. head takes bats with universal 10 in. pin spacing.
Speedball publishes its size and weight: 29.75 in. long, 24.5 in. wide, 17.25 in. tall and 68 lb. The Brents’ pages give neither, and Shimpo lists two weights for the VL‑Whisper, so the Clay Boss is the easiest pick to plan a room around.
Cleanup is easy by design. Speedball says the polyethylene tabletop and two-part splash pan are there for easy cleanup. Its manual also says not to use the wheel outdoors or let it stand in water, so wipe it down rather than rinse it.
Height is adjustable. The Boss manual explains loosening the nut on each leg, twisting the foot to raise or lower it and tightening it again, which also levels the wheel on an uneven floor.
Reversing works the same as the Big Boss: unplug, turn the motor connector 180 degrees, plug back in. The 10-year warranty needs registration within 30 days, through the QR card in the box or by calling Speedball. Speedball’s page also lists a $50 rebate for registered new wheels, claimed within six months.
Our call: the everyday home wheel on this page. It scores 8.7, held back by its 100 lb capacity and the plug-style reversing.
Best for a quiet, beltless wheel
Shimpo VL‑Whisper
Potter’s wheel, direct drive, 100 lb centering, 14 in. wheel head
You share a room with others and want the quietest drive, with no belt to replace.
Skip it if
You want the longest warranty. The Clay Boss has 10 years for the same 100 lb.
The VL‑Whisper is Nidec-Shimpo’s direct-drive wheel. It was new and in stock at our 1:16 PM check on Oct 22. It scores 8.4, sixth on our cards and well over 7.0.
Its motor sits right under the head. Shimpo describes a brushless, beltless motor that runs on magnets with electronic control, and calls it extremely quiet. Seattle Pottery Supply says direct-drive wheels are stronger and more responsive than belt wheels, though heavier.
Shimpo rates it at 100 lb of centering. It says the wheel “maintains a specific set speed when stepping away to center, even with slow speeds with 100 lbs of clay,” which earns full marks for speed under load. The motor is 1/2 hp, 400 watts, on 115 volts, and the pedal gives 0 to 250 rpm.
Two touches you won’t find on the others. With the pedal at stop, the head turns freely by hand like a banding wheel, handy for decorating. And Shimpo says the pedal stops the head immediately, since there’s no belt to coast.
Height is flexible. The legs adjust from 18 to 21 in. in 1 in. steps and come off for tabletop use. Shimpo sells extension legs separately that raise it to 35 to 37 in. so you can throw standing up. Its manual lists the two-piece splash pan and foot pedal among the parts.
The 14 in. head is a light alloy casting drilled for bat pins. Shimpo warns that highly acidic clays can pit the aluminum and suggests working on a bat whenever you can. Direction is a forward/reverse switch; the manual says never to flip it while the head is turning.
The warranty is the catch: 5 years from purchase for the original buyer of a new wheel, against 10 for the Brents and Bosses. Shimpo says you must register to claim, and get its authorization before shipping anything back. That’s why it scores 8 there.
Our call: the quiet, beltless wheel on this page. It scores 8.4, held back by a shorter warranty and 100 lb capacity.
Match a wheel to your heaviest clay
Enter the most clay you’ll center at one time. The matcher shows which wheels take it, how much margin is left and each maker’s power note.
Clay-load matcher
Type the most clay, in pounds, you’ll center at one time.
6 of 6 wheels take 25 lb.
Brent Model CXC (score 10.0): takes 25 lb with 275 lb to spare. 10 A motor, the highest draw here. Check it on Amazon
Brent Model B (score 9.3): takes 25 lb with 125 lb to spare. 5 A motor, the lowest draw here. Check it on Amazon
Speedball Big Boss (score 9.0): takes 25 lb with 150 lb to spare. Speedball recommends a 15 A circuit, and 20 A near or at capacity. Check it on Amazon
Speedball Clay Boss (score 8.7): takes 25 lb with 75 lb to spare. Speedball recommends a 15 A circuit, and 20 A near or at capacity. Check it on Amazon
Capacities and power notes from each maker’s page or manual, read Oct 22, 2026. Listings checked new and in stock at 1:16 PM.
Capacity is the most clay a wheel can turn while you work it. Seattle Pottery Supply points out that the limit includes the pressure of your hands, not just the clay’s weight. That’s why a margin matters more as you work bigger.
For scale, Wikipedia notes a skilled potter can quickly throw a vessel from up to 30 lb of clay. Every wheel on this page takes more than three times that. The gap shows up with tall jars, big platters and pieces thrown in sections.
The six wheels compared
From the makers’ pages and manuals. Scroll sideways on a phone; tap a header to sort on a computer.
Plain Buy Guides spec score out of 10 for the six picks. Built from four published facts; it’s our arithmetic, not a customer rating.
All six have a 14 in. head and a foot pedal, and the makers say all six hold their speed as the load changes. The scores split on capacity, warranty length and how each wheel reverses.
How much clay each wheel takes
Capacity is 35% of our score: 10 for 300 lb or more, down to 7 for 100 to 149 lb and 5 for 25 to 49 lb.
Maker’s capacity figure for each pick, read Oct 22, 2026.
What you’ll make
Clay you might center
What the sources say
Cups, bowls, small plates
A few pounds
Seattle Pottery Supply: small tabletop wheels suit 5 to 8 lb
Vases and serving pieces
Up to about 30 lb
Wikipedia: a skilled potter can throw a vessel from up to 30 lb
Big jars, tall forms, platters
Well past 30 lb
Seattle Pottery Supply: bigger work needs a bigger wheel
Classroom wheels shared by many
Any of the above
AMACO recommends the Brent C for schools and art centers
A bigger number doesn’t make your mug better. It means the wheel has room for more clay and the pressure of your hands, per Seattle Pottery Supply. Brent rates its wheels for clay handled continuously, and Speedball says running near its limit calls for a 20 amp circuit.
If you’re learning, any pick here has room to grow. Seattle Pottery Supply warns that cheap wheels may break or be outgrown quickly. That’s also why the tabletop units in our left-out table, rated at 11 to 25 lb, don’t make the picks.
Motor, speed range and steady speed
A maker’s statement that speed holds under load is 20% of our score. All six picks have one.
Wheel
Motor
Speed range
What the maker says about load
Brent CXC, C and B
1, 3/4 and 1/2 hp DC; 10, 7 and 5 A
0–240 rpm
“Wheel speed remains constant under varying loads”
Speedball Big Boss
1.0 peak hp
0–240 rpm
Head “remains smooth and constant under varying loads”
Speedball Clay Boss
0.5 hp
0–240 rpm
Load-sensing control keeps head speed steady
Shimpo VL‑Whisper
1/2 hp, 400 W brushless DC
0–250 rpm
Holds a set speed even at slow speeds with 100 lb
Speedball Artista (left out)
1/3 hp
0–220 rpm
No statement on the pages we read
Horsepower alone doesn’t tell you much, because makers measure it differently. Speedball calls the Big Boss 1.0 peak horsepower, Brent gives horsepower and motor current, and Shimpo gives horsepower and watts. What matters at the wheel is whether the speed sags when you lean in.
Seattle Pottery Supply calls variable speed a must, since a head that spins too fast throws clay everywhere. All six picks run from zero to 240 or 250 rpm on a pedal. You center fast, then slow down to open, pull and trim.
Spinning both ways: switch, plug or fixed
Direction is 15% of our score: 10 for a switch, 8 for a reversing plug, 5 when it’s set at purchase.
Wheel
How it reverses
Check score
Brent CXC, C and B
Toggle switch with a neutral position
10
Shimpo VL‑Whisper
Forward/reverse switch; never flip it while the head turns
10
Speedball Big Boss and Clay Boss
Unplug, turn the motor connector 180 degrees, plug back in
8
Speedball Artista (left out)
Right- or left-handed model chosen at purchase; can’t be changed
5
Wikipedia notes that in most cultures the wheel spins counterclockwise with the right hand outside the pot, while Japanese pottery is thrown the other way. Seattle Pottery Supply adds that the direction you like can depend on which hand you favor, and some potters switch by project.
Seattle Pottery Supply suggests trying a wheel before you shop, so you know which way you like to throw. If you’re not sure, a switch is the easy answer. The Speedball plug works fine; it just takes a minute with the power off.
Foot pedal or hand lever
This one stays out of the score, because it comes down to your hands and feet. Here’s what each wheel uses.
Wheel
Speed control
Notes from the maker
Brent CXC, C and B
Cast aluminum foot pedal, 4 ft cord
Modular plug for easy replacement
Speedball Big Boss and Clay Boss
Foot pedal
Pedal and splash pan in the box
Shimpo VL‑Whisper
Remote foot pedal
Head stops at once when you lift off
Speedball Artista (left out)
Hand lever
A foot pedal is sold separately
Seattle Pottery Supply says a hand lever gives finer control, is easier for beginners and is more accessible for people with some disabilities. It adds that a pedal keeps both hands on the clay but takes coordination, since it’s easy to keep pressing without noticing.
Every pick on this page uses a pedal. If you want a lever, the Speedball Artista has one, though it misses our 7.0 floor on capacity and direction.
Belt drive or direct drive
Left out of the score too. Each design has a trade-off, and the makers’ warranties treat them differently.
Drive
Wheels here
Upside
Downside
Belt
Brent CXC, C and B (6-groove poly-v, self-tensioning)
Parts are separate and simple to service (Seattle Pottery Supply)
Belts wear; AMACO’s warranty excludes belts and wheel heads as wear parts
Direct drive
Shimpo VL‑Whisper
No belt; quiet; stops at once (Shimpo)
Heavier and costs more (Seattle Pottery Supply)
Not stated
Speedball Big Boss and Clay Boss
Speedball’s pages describe the motor, not the drive
We don’t guess
Seattle Pottery Supply calls direct-drive wheels stronger, more responsive and more reliable, likely to last a lifetime, while belt wheels are easier to fix at home. Brent answers the belt’s weak point with automatic tensioning, which keeps the belt tight as it stretches.
Plan for wear either way. AMACO’s warranty lists normal wear on belts and wheel heads as not covered, and Shimpo excludes damage from water overflowing the splash pan into the motor bearings. Empty the pan often.
Warranty length and the fine print
Warranty is 30% of our score: 10 for 10 years, 8 for 5 to 9, 6 for 2 to 4. The small print matters as much as the length.
Warranty for a new wheel, from each maker’s own terms, read Oct 22, 2026.
Maker
Length
Register within
What’s left out
How a claim works
AMACO/Brent
10 years
6 months
Wear parts such as belts and wheel heads; work by an unauthorized dealer
Contact the seller first, then AMACO technical support; receipt, model and serial number
Speedball Boss Series
10 years
30 days, or it isn’t in effect
Accidents, unauthorized repair, flood or lightning
Call Speedball; ship parts prepaid to its factory; full replacement only for claims in the first 30 days
Nidec-Shimpo
5 years
Registration required to claim
Overflow into the bearings, outdoor exposure, power surges
Shimpo’s authorization before you return anything, freight prepaid
Speedball’s 30-day window is the one to watch. Its manuals say the wheel must be registered within 30 days of purchase to make the warranty effective, by the card in the box or online. AMACO gives six months. Do it the day the wheel arrives.
All three warranties start at the purchase date and stay with the first owner. AMACO covers parts and labor for valid claims, Speedball does when the work is done at its factory, and Shimpo says most parts and labor. Keep the Amazon receipt and the serial number together.
Size, height and what comes in the box
From the makers’ pages and manuals. Blank cells mean the maker’s page we read didn’t say.
Wheel
Weight
Size (in.)
Height
In the box
Brent CXC, C and B
Not published
Not published
Fixed steel legs
Foot pedal, splash pan, 14 in. Plast-i-Bat
Speedball Big Boss
Not published
Not published
Adjustable legs
Foot pedal, two-part splash pan
Speedball Clay Boss
68 lb
29.75 × 24.5 × 17.25
Adjustable legs
Foot pedal, two-part splash pan
Shimpo VL‑Whisper
93 or 120 lb (Shimpo lists both)
23 1/8 × 27 1/2 × 22 3/4
Legs 18 to 21 in.; extension legs to 35 to 37 in. sold separately
Foot pedal, two-piece splash pan
If you’d rather throw standing, the VL‑Whisper is the only pick with a maker extension kit for it. The Boss wheels’ adjustable legs help level the wheel on a garage or basement floor, and the VL‑Whisper’s legs come off for tabletop use.
Bats are removable boards that sit on the wheel head. Seattle Pottery Supply explains you lift a finished piece off on its bat and start the next one without re-centering. Speedball’s heads take universal 10 in. pin spacing, so most bats on the market fit.
Outlets, circuits and voltage
Each maker gives power advice in its manual or product page. Here it is side by side.
Wheel
Voltage
Current or power
Maker’s advice
Brent CXC
110 V (220 V by request)
10 A motor
Ask AMACO customer service for the 220 V version
Brent C
110 V (220 V by request)
7 A motor
Same
Brent B
110 V (220 V by request)
5 A motor
Same
Speedball Big Boss and Clay Boss
110 V or 220 V
Not given
15 A circuit; 20 A near or at capacity
Shimpo VL‑Whisper
115 V, 60 Hz
400 W
Don’t plug in or unplug with wet hands
A wheel shares its circuit with whatever else is plugged in on it. Speedball’s 20 amp advice is for work near the wheel’s stated capacity, so a Big Boss throwing 150 lb lumps needs more circuit than a Clay Boss making mugs. The Brent amp ratings let you add up a classroom’s load.
Water is the other risk. Speedball says not to use its Boss wheels outdoors or let them stand in water, Shimpo warns against touching the plug with wet hands, and Shimpo’s warranty excludes damage from outdoor exposure and splash pan overflow.
The wheels we checked and left out
These scored under 7.0 on the same four checks, or missed the kind of wheel this page covers.
Spec scores for two left-out wheels, same formula as the picks.
Wheel checked
Score
What held it back
What it does well
Speedball Artista
6.1
25 lb capacity; direction fixed at purchase; no statement on speed under load
Portable; hand lever; 5-year warranty
VEVOR 11 in. wheel (LSZLK‑515)
5.0
17.6 lb capacity on the listing; no warranty term on the listing or a maker manual we could find
Switches direction; lever and pedal
Other VEVOR tabletop wheels
Below 7.0
Listings give 11 lb or no capacity; one gives two different motor ratings
Low weight; small footprint
Speedball Boss Elite
9.0
Same wheel as the Big Boss, plus a utility shelf; only 3 left at our check
Kept out of the picks as a near twin
Shimpo VL-Lite and Aspire
Not on Amazon
No new, in-stock Amazon listing at our check
Seattle Pottery Supply’s suggestions for beginners
The Artista is a fine small wheel for classrooms and travel. Speedball sells it in right- and left-handed versions, and its FAQ says the direction can’t be changed later. Its 25 lb capacity and fixed direction pull it to 6.1, under our 7.0 floor.
Tabletop hobby wheels and kids’ kits are a different kind of product. Seattle Pottery Supply says small wheels suit cups and bowls with 5 to 8 lb of clay. For a closet or a desk corner they work, but they can’t match these wheels’ capacity or warranties.
Where the sources disagree
Where a maker’s page, its manual and a listing say different things, we show both and use the lower or the maker’s own.
Topic
One source says
Another says
We use
VL‑Whisper weight
Shimpo product page: 120 lb
Shimpo manual: 93 lb (42.5 kg)
Both shown; weight isn’t in the score
VL‑Whisper height
Product page and manual: 22 3/4 in.
Spec sheet: 33 3/4 in.
Both shown; legs adjust
Big Boss motor
Speedball: 1.0 peak hp
Amazon title: 1.0 hp
Speedball’s wording; motor isn’t scored
Brent B rebate
Listing: $100 product rebate
AMACO: $100 of AMACO glazes, North America only
AMACO’s wording
AMACO support line
Warranty page: (800) 374-1600
Warranty sheet: 800‑999‑5456
Both shown
VEVOR 14 in. motor
Listing title: 450 W
Listing bullet: 280 W ± 20%
Neither; left out
None of these change a score. Capacity, warranty, speed under load and direction come straight from each maker’s own page and manual, and they agree with the listings. The conflicts are about weight, height and paperwork, which is why we show both numbers.
Recalls
We searched the CPSC recall list for each maker and for pottery wheels on Oct 22, 2026.
Search on Oct 22, 2026
Recalls found
Speedball, AMACO/Brent, Shimpo, VEVOR
None
Pottery wheel
Two toy kits, not on this page: Creatology battery kits (2018) and Discovery Kids kits (2004)
No wheel on this page has been recalled. In 2018 Michaels recalled about 263,000 Creatology battery-powered pottery wheel kits because the battery compartment could overheat. In 2004 about 150 Discovery Kids kits sold in October 2003 were recalled over bacteria in the clay. Both were children’s toys.
How to choose a pottery wheel
Answer these in order. Each answer narrows the picks.
Question
If yes
If no
Will you center more than 100 lb at once?
Brent CXC, Brent C, Brent B or Big Boss
Any pick, including the Clay Boss and VL‑Whisper
Do you switch direction often?
A Brent or the VL‑Whisper (switch)
Speedball’s reversing plug is fine
Is the room shared or noise-sensitive?
VL‑Whisper, direct drive
Any pick
Do you want to throw standing?
VL‑Whisper with Shimpo’s extension legs
Any pick
Do you want the longest warranty?
Any Brent or Boss: 10 years
VL‑Whisper: 5 years
Will you register within 30 days?
Speedball’s 10 years applies
Pick a Brent: AMACO gives six months
Start with the most clay you expect to center, then direction, then the room. Capacity and warranty drive our scores, but your space and your hands decide the rest. Seattle Pottery Supply’s first question is how much space you have.
Setting up a craft room for more than clay? Our wood lathe guide scores midi lathes on the same kind of published specs, and the embroidery machine guide sorts Brother machines by hoop size.
Questions people ask
What is the best pottery wheel?
Our top pick is the Brent Model CXC, which scores 10.0. AMACO rates it for 300 lb of clay with a 10-year warranty and a forward/reverse switch. For home work at 100 lb, the Speedball Clay Boss scores 8.7.
What is the best pottery wheel for beginners?
Any pick here works, since all six hold speed under load. Seattle Pottery Supply suggests a hand lever for beginners; every pick uses a pedal, which most class wheels use too. The Clay Boss has a 10-year warranty and a published size and weight.
What is centering capacity?
The most clay a wheel can turn while you work it. Seattle Pottery Supply notes the limit includes your hand pressure, not just the clay. Our picks range from 100 lb to 300 lb.
How much clay can a pottery wheel hold?
It depends on the wheel: 300 lb for the Brent CXC, 225 for the C, 175 for the Big Boss, 150 for the B and 100 for the Clay Boss and VL‑Whisper. Small tabletop wheels list 11 to 25 lb.
Can a pottery wheel spin both ways?
All six picks can. The Brents and the VL‑Whisper use a switch; the Speedball Boss wheels use a reversing plug at the motor connector. The Speedball Artista is sold as right- or left-handed and can’t be changed.
Is a foot pedal or a hand lever better?
Seattle Pottery Supply says a lever is easier for beginners and allows fine control, while a pedal keeps both hands on the clay. All six picks use a pedal.
Is a direct-drive wheel better than a belt-drive wheel?
Seattle Pottery Supply calls direct drive stronger and more responsive but heavier, and belt drive simpler to service. The Shimpo VL‑Whisper is direct drive; the Brents use a self-tensioning belt.
What is a kick wheel?
A wheel you spin with your feet, with no motor. Seattle Pottery Supply says kick wheels cost the least but take the most work and practice, and it suggests an electric wheel for beginners.
Do I need a splash pan?
It catches the water and slip that fly off as you throw. All six picks come with one; the Speedball and Shimpo pans come apart in two pieces.
What are bats on a pottery wheel?
Removable boards that sit on the wheel head. You lift a finished piece off on its bat and start the next one without re-centering. Brent includes a 14 in. Plast-i-Bat.
What circuit does a pottery wheel need?
Speedball recommends a 15 amp circuit and 20 amps near full capacity. Brent motors draw 5 to 10 amps, and the Shimpo uses 400 watts at 115 volts.
How long is a pottery wheel warranty?
Ten years for the Brent wheels and Speedball Boss Series, five for the Shimpo VL‑Whisper and the Speedball Artista. Speedball requires registration within 30 days; AMACO gives six months.
Can I use a pottery wheel outdoors?
Speedball says not to use its Boss wheels outdoors or let them stand in water, and Shimpo’s warranty excludes damage from outdoor exposure.
How much does a pottery wheel cost?
Prices change often, so each card shows today’s Amazon price with the time we read it. Our scores don’t use price.
How we pick pottery wheels
How we pick
We looked at one kind of product: electric potter’s wheels for throwing, with 11 to 14 in. heads, from makers that publish capacity and a warranty. Six wheels from three makers are picks; two more are scored in the left-out table.
Every listing passed an offer read on Amazon at 1:16 PM on Oct 22, 2026: new, in stock and the buy-box winner. We matched each to its maker’s page by model and photo.
Four checks score 0 to 10: centering capacity 35%, warranty 30%, a stated steady speed under load 20% and how the wheel reverses 15%. Price, noise and weight aren’t scored.
Why trust us
Isaac Daniels, who owns Plain Buy Guides, edits this page. We read Speedball’s product pages and owner’s manuals, AMACO’s Brent pages and warranty sheet, Shimpo’s VL‑Whisper page, spec sheet, manual and warranty, Seattle Pottery Supply’s beginner guide and the CPSC recall list, all on Oct 22, 2026. Where sources disagree, we show both.
Scoring: capacity scores 10 for 300 lb or more, 9 for 200 to 299, 8 for 150 to 199, 7 for 100 to 149, 6 for 50 to 99, 5 for 25 to 49 and 3 under 25 lb or unstated.
Warranty scores 10 for 10 years, 8 for 5 to 9, 6 for 2 to 4 and 4 for 1 year or none found. Speed under load scores 10 when the maker states it and 6 when it doesn’t. Direction scores 10 for a switch, 8 for a reversing plug and 5 when it’s fixed at purchase. The weighted average is rounded half up to one decimal.
The spec score, check by check
Wheel
Capacity
Warranty
Speed under load
Direction
Score
Brent Model CXC
10
10
10
10
10.0
Brent Model C
9
10
10
10
9.7
Brent Model B
8
10
10
10
9.3
Speedball Big Boss
8
10
10
8
9.0
Speedball Clay Boss
7
10
10
8
8.7
Shimpo VL‑Whisper
7
8
10
10
8.4
Speedball Artista
5
8
6
5
6.1
VEVOR 11 in. (LSZLK‑515)
3
4
6
10
5.0
Sources
AMACO/Brent (shop.amaco.com), Model B, Model C and Model CXC product pages; amaco.com warranty page; New Equipment Warranty Information sheet
Speedball Art Products (speedballart.com), Artista, Clay Boss, Big Boss and Boss Elite pages; Boss Series and Artista owner’s manuals; warranty registration page