Cordless drill guide
BLACK+DECKER LD120VA 20V MAX Drill/Driver Kit
A light 20V MAX drill/driver kit sold with a bit set
The LD120VA kit pairs the LD120 20V MAX drill/driver with a battery, a charger and, per the listing, 30 accessories. The manual describes a mode collar with a drilling position and fifteen screwdriving settings; the listing's 24-position clutch, 750 rpm and 300 in-lb figures appear in neither maker document.
Listing checked . Confirm the model, included parts and availability before ordering.
Published specifications
- Model LD120VA (ServiceNet Type 1); the tool is the LD120 20V MAX drill/driver
- Mode collar: drill position plus screwdriving settings 1 to 15 (manual)
- Keyless chuck; ServiceNet's chuck part note reads '38 Capacity'
- 20 V maximum initial battery voltage, 18 V nominal (manual)
- Listing: LB20 battery, LCS20 charger, 30 accessories; ServiceNet lists LBXR20 and LCS1620
- Two-year limited warranty for home use (manual)
Fit and limits
Strengths
- Battery, charger and a 30-piece bit set are in the box, per the listing
- Fifteen screwdriving torque settings plus a drill position on the collar
- Bit storage slot in the base, per the manual
Caveats
- Neither maker document prints a speed or torque figure
- Listing says 24 clutch positions; the manual describes fifteen screwdriving settings
- Battery and charger part numbers differ between the listing and ServiceNet
What the LD120VA kit is
The Amazon listing sells model LD120VA, which it describes as the LD120 20V MAX drill/driver with one battery, one charger and 30 accessories: six brad-point drill bits, ten one-inch and nine two-inch screwdriving bits, four nut drivers and a magnetic bit holder. Neither maker document lists those accessories, so the kit contents come from the listing.
The ServiceNet parts site at toolservicenet.com lists Model #LD120VA, Type 1, under Black & Decker and links the LD120 instruction manual from that page. blackanddecker.com shows no product page for LD120VA, so the ServiceNet page and the manual it links are the maker documents for this kit.
Clutch, chuck and speed: what the maker prints
The manual describes a mode selection collar with a drilling position and screwdriving positions numbered 1 to 15, where a higher number gives more torque, plus a variable speed switch and a forward/reverse button. It notes that the drill does not clutch in the drilling position.
The listing advertises a 24-position clutch, two speeds, 750 rpm and 300 in-lb of torque. Neither the manual nor the ServiceNet page prints a speed or torque figure, and the manual's collar has fifteen numbered screwdriving settings. The manual gives no chuck capacity; ServiceNet's chuck part carries a "38 Capacity" note, and the listing gives a 10 millimeter maximum.
Battery, charger and warranty
The listing names an LB20 battery and an LCS20 charger. ServiceNet's LD120VA parts list shows LB20 as "see LBXR20" and lists an LCS1620 charger, while the manual's compatibility table names LBXR20-series packs and chargers including LCS20 and LCS1620. The manual gives a maximum initial battery voltage of 20 volts and a nominal 18 volts.
The manual's limited warranty runs two years from purchase for products used in a home environment and excludes abuse, accidental damage and repairs by anyone other than BLACK+DECKER or its authorized service centers; the listing also says two years. The manual adds a bit storage slot in the base, and the listing gives a weight of 3.9 pounds.
Check the current listing
Main caveat to weigh before ordering: Neither maker document prints a speed or torque figure.
Primary sources
- ServiceNet (toolservicenet.com), Black & Decker section: LD120VA Type 1 parts and documents page
- BLACK+DECKER LD120 20V MAX cordless drill instruction manual (NA549666), linked from the LD120VA ServiceNet page
Primary sources checked .
Compare with
Side-by-side pages, this model next to: DEWALT DCD777D1 20V MAX Brushless Drill/Driver Kit, CRAFTSMAN V20 CMCD711C2 Hammer Drill Kit.